• Journal of the Korean Statistical Society
• /
• v.21 no.1
• /
• pp.59-69
• /
• 1992

A measure is proposed to represent the degree of residuals from the symmetry model for square contingency tables with nominal categories. The measure is derivedby modifying the sum of squared singular values for a skew symmetric matrix of the residuals from the symmetry model. The proposed measure would be useful for comparing the degree of residuals from the symmetry model in several tables.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.10
• /
• pp.733-739
• /
• 1988

Adaptive controllers for linear system whose nominal values of coefficients only are known, that is corrupted by disturbance, are designed by signal synthesis model reference adaptive control (MRAC). This design is stemmed from the Lyapunov direct method. To reduce the model following error and to improve the conrergence rate of the design, an indirect suboptimal control law is de rived using the Hamilton Jacobi Beellman equation. Proper compensaton for the effects of time varying coefficients and plant disturbance are suggested. In the design procedure no complete identification of unknown coefficients are required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.9-18
• /
• 2009

This paper introduces the application of DE (Differential Evolutionary) method for the estimation of tensile force of the externally prestressed tendon. The proposed technique, a SI (System Identification) method using the DE algorithm, can make global solution search possible as opposed to classical gradient-based optimization techniques. The numerical tests show that the proposed technique employing DE algorithm is a useful method which can detect the effective nominal diameters as well as estimate the exact tensile forces of the externally prestressed tendon with an estimation error less than 1% although there is no a priori information about the identification variables. In addition, the validity of the proposed technique is experimentally proved using a scale-down model test considering the serviceability state condition without and with the loss of the prestressed force. The test results prove that the technique is a feasible and effective method that can not only estimate the exact tensile forces and detect the effective nominal diameters but also inspect the damping properties of test model irrespective of the loss of the prestressed force. The 2% error of the estimated effective nominal diameter is due to the difference between the real tendon diameter with a wired section and the FE model diameter with a full-section. Finally, The accuracy and superiority of the proposed technique using the DE algorithm are verified through the comparative study with the existing theories.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.6
• /
• pp.740-746
• /
• 2010

This study standardized the catch per unit effort (CPUE) of bigeye tuna (Thunnus obesus) caught by the Korean longline fishery in the Pacific Ocean. The study used a general linear model (GLM) to standardize the CPUE using catch and effort data aggregated by year, month, and $5{\times}5$ degrees of latitude and longitude in the tropical Pacific Ocean from 1982 to 2008 (except for 1988 and 1989). Explanatory variables in the GLM analysis included year, month, subtropical area, and number of hooks between floats (HBF). The study area and HBF were subdivided into three subtropical areas and six classes, respectively. During the study period, the standardized CPUE was significantly related to the nominal CPUE. The standardized CPUE declined sharply, as compared to the nominal CPUE, after the mid 1990s. In particular, the decline in the standardized CPUE in all subtropical areas in the 2000s was clearer than that of the nominal CPUE.

• The Journal of Small Business Innovation
• /
• v.20 no.1
• /
• pp.19-33
• /
• 2017

In this paper, we suggest proper policy directions through an analysis onthe impact of changes in self-employment on the national economy. In other words, we intend to identify the current status of self-employment jobs and present policy directions for supporting self-employed workers. In order to grasp the dynamic relationship of variables, we used a VAR model to measure the impact of self-employment job fluctuations and macroeconomic variables on each other. The analysis results demonstrate that an exogenous shock to the ratio of self-employed workers does not show a significant impact on the nominal growth ratio. However, when the analysis was done separately on an exogenous shock to the ratio of self-employed workers with employees and without employees, an increase in the ratio of self-employed workers with employees showed a positive impact on nominal growth. On the other hand, an increase in the ratio of self-employed workers without employees showeda negative impact on nominal growth. In future studies, it will be necessary to do additional analysis on quarterly data to estimate the short-term impact of macroeconomic variables on changes in the ratio of self-employed workers.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.83-85
• /
• 2008

This paper deals with design and dynamic analysis of electromagnets for levitation applications. On the basis of equivalent magnetic circuit (EMC) method and 3-D finite element analysis (FEA) model, initial and detailed design for electromagnets are performed. Using the state equation for the closed-loop control, the dynamic analysis of electromagnets is also performed. Finally, this paper investigates the variation of levitation force according to current under fixed nominal air-gap, and the variation of required current according to load weight in order to maintain the nominal air-gap. From these results, the validation of design and dynamic analysis of electromagnets is confirmed. In particular, the influence of winding temperature on levitation control is discussed in detail.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1328-1336
• /
• 2004

According to our fatigue tests carried out at 20 Hz, R=0.1 on transversely butt-welded joints, fatigue strengths of as-welded specimens, that is, specimens having residual stress are higher than those of annealed specimens in short life range, but vice verse in long life range. This behavior seems to be concerned mainly with residual stress relaxation by applied loading. After analyzing the welding process, we conducted finite element analysis to quantify the degree of residual stress relaxation. By taking into account residual stress relaxation, modified Goodman diagram, and nominal stress, we evaluated the fatigue life of the welded joint from the S-N curve for the parent material. The estimated results are in a good agreement with the experimental results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.477-480
• /
• 2007

Hydrate phase equilibrium for the binary CO2+water and CH4+water mixtures in silica gel pore of nominal 6, 30, and 100 nm were measured and compared with the cacluated results based on van der Waals and Platteeuw model. At a specific temperature three-phase hydrate-water-vapor (HLV) equilibrium curves for pore hydrates were shifted to the higher-pressure condition depending on pore sizes when compared with those of bulk hydrates. Notably, hydrate phase equilibria for the case of 100 nominal urn pore size were nealy identical with those of bulk hydrates. The activities of water in porous silica gels were modified to account for capillary effect, and the calculation results were generally in good agreement with the experimental data.

• Management Science and Financial Engineering
• /
• v.16 no.3
• /
• pp.95-102
• /
• 2010

This paper considers the robust inventory control problem introduced by Bertsimas and Thiele [4]. In their paper, they have shown that the robust version of the inventory control problem can be solved by solving a nominal inventory problem which is formulated as a mixed integer program. As a proper generalization of the model, we consider the problem with non-stationary cost. In this paper, we show that the generalized version can also be solved by solving a nominal inventory problem. Furthermore, we show that the problem can be solved efficiently.

• Journal of Power System Engineering
• /
• v.5 no.4
• /
• pp.53-60
• /
• 2001

This paper considers a modeling for the MIMO magnetic bearing system. The rotor is flexible and has a complex shape. To obtain the nominal plant transfer functions, we perform a numerical analysis by using the finite element method(F.E.M.) for the rotor's dynamics, and make a nominal model by reducing the modes from the results. And, we have experimented on the frequency response by a closed-loop identification method, and compared it with the simulation's result on the closed-loop control system.