• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.385-394
• /
• 2004

This paper proposes the generalized structure of a model-based disturbance rejection controller called a Robust Internal-loop Compensator (RIC). The framework consists of the RIC in the internal-loop to eliminate disturbances and a feedback controller in the external-loop to achieve nominal control performance. As the main contribution of this paper, we redefine the design problem of the RIC as a regulation control problem, then show that this new definition with the RIC structure provides more design flexibility and less implementation constraints. This is verified through a comparative structural analysis with Disturbance Observer (DOB) and Adaptive Robust Control (ARC). Two design examples of the RIC are given, along with practical issues that should be considered in the design procedure. The proposed framework is demonstrated by simulations of a rotary-type motor and experiments with a linear-type motor system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1771-1776
• /
• 2003

In mobile robot navigation, one of the key problems is the pose estimation of the mobile robot. Although the odometry can be used to describe the motions of the mobile robots quite simple and accurately, the validities of the models are limited by a number of error sources contaminating the encoder outputs so that applying the conventional extended Kalman filter to these nominal model does not yield the satisfactory performance. As a remedy for this problem, we consider the uncertain nonlinear kinematic model of the mobile robot that contains the norm bounded uncertainties and also propose a new robust extended Kalman filter based on the Krein space approach. The proposed robust filter has the same recursive structure as the conventional extended Kalman filter and can hence be readily designed to effectively account for the uncertainties. The computer simulations will be given to verify the robustness against the parameter variation as well as the reliable performance of the proposed robust filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.351-354
• /
• 1993

In this paper, reheat-fan engine is described as class of models constructed from nominal and uncertainty model for robust control. In this class of models, uncertainty model consists of structured and unstructured uncertainty, and each model is identified from nonlinear simulation using FFT and ML technique. Then, control requirements and augmented plant are specified. H$_{\infty}$ controller satisfying the control requirements is designed by using constant scaling matrix. Finally, efficacy of the H$_{\infty}$ controller is showed by computer simulation.n.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.

• Korean Journal of Materials Research
• /
• v.11 no.11
• /
• pp.947-952
• /
• 2001

The meso-scale microstructure of the $Ni-Ni_3Al- Ni_3V$ system is crucial to obtain both high strength and high toughness. Its evolution may be predicted with the aid of computer simulation of the compositional separation for heat-treated alloys. In this study, computer simulations of the hypothetical A-B-C ternary system, which is similar to the $Ni-Ni_3Al- Ni_3V$ system in terms of phase equilibria, have been performed using the kinetic modeling. Simulated morphologies were changed with nominal compositions and model parameters. It was showed the current model was useful and the more realistic model was proposed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.4
• /
• pp.253-262
• /
• 1992

A numerical procedure is introduced to calculate local ventilation effectiveness using the definitions of local decay rate and local mean age. A low Reynolds number $k-{\varepsilon}$ model is implemented to calculate steady state turbulent velocity distributions, and a step-down method is used to calculate transient concentration distributions. Simulations are carried out for several different values of air change rates and several different diffuser angles in a two-dimensional model of a half scale office room. The results show that the local ventilation effectiveness within a room could vary significantly from one location to another. The nominal air change rate based on the assumption of complete mixing of room air does not provide the local ventilation effectiveness information. It is numerically proved that the local mean age distribution obtained from the transient calculation is equivalent to the steady state concentration distribution with homogeneously distributed contaminant sources.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.223-226
• /
• 1998

The control objective of steam generator water level in the secondary circuit of a nuclear power plant is to regulate the water level at the desired set point. The dynamics of steam generators is non-linear in nature. The task of modelling such plant is very difficult and especially so when plant operating conditions change frequently. In these reasons, conventional PI gains over all pover range will not work efficiently and a manual control is generally used in low power operation. Therefore the robust H$\infty$ controller design method should be required. In this paper, we design the robust H$\infty$ controller for water level control of steam generator using a mixed H$\infty$ optimization with model-matching method. Firstly we choose the desired model that has good disturbance rejection performance. Secondly we design a stabilizing controller to keep the model-matching error small and also provide sufficiently large stability margin against additive perturbations of the nominal plant.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.10
• /
• pp.748-754
• /
• 1987

A robustness analysis for model reference adaptive control(MRAC) system with plant uncertainty is discussed in this paper. The adaptive control system is designed under assumptions that the controlled plant is represented by a lst order nominal model and that the system is drived by a constant reference signal. When using general gradient method(GGM), it is shown that unmodelled dynamics in plant model can cause the instability of the overall control loop during the adaptation process. However, as the algorithm of least square method(LSM) is introduced, the global stability of the system can be hold. And it is also given that the boundedness of adjustable parameters may be verified using the concept of an equilibrium point analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.45.3-45
• /
• 2001

This paper deal with a fault detection algorithm for front wheel passenger car systems by using robust $H{\infty}$ control theory. Firstly, we present a unified formulation of vehicle dynamics for front wheel car systems and transform this formulation into state space form. Also, by considering the cornering stiffness which depends on the tyre-road contact conditions, a multiplicative uncertainty for vehicle model is described. Next, the failures of sensor and actuator for vehicle system are defined in which the fault .lter is considered. From the nominal vehicle model, an augmented system includes the multiplicative uncertainty and the model of fault filter is proposed. Lastly by using $H{\infty}$ norm property the fault detect conditions are deefi.ned, and the actuator and sensor failures are detected and isolated by designing the robust $H{\infty}$ controller, respectively.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.250-254
• /
• 2008

Robot actuators are significantly important with respect to whole control system performance. This paper presents an adaptive control approach for flexible robot actuators with time-varying spring and damping nature. We first represent a perturbed system model with assumption that its information are partially known. Nominal model reference control method is employed for deriving our adaptive control law. We carry out numerical simulation to evaluate the proposed control system and compare simulation results to a well-known control method for demonstrating its effectiveness.