• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1873-1875
• /
• 1996

This paper deals with the lightning surge protective devices with combination of varistor and LC filter. UP to now, the varistor alone were used as overvoltage protection devices fer the AC power mains. In this work, in order to improve the cutoff performance of surge protective device, the hybrid circuit surge protective device for an AC single phase mains was designed and investigated. The first stage of hybrid circuit is to remove most of any large surge energy and protect the second stage components. The purpose of the second is to protect the load and increase the cutoff capacity of surge protective devices. Also LC filter attenuates the remnant that travels downstream from the first stage component and the high frequency noises. As a consequence, it was found that the proposed hybrid surge protective device for AC power mains has a variety of advantages such as low and tight clamping voltage, high frequency noise reduction and large cutoff capacity.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.411-421
• /
• 2017

An approach based on a 2D lumped model is presented to quantify the voltage transfer gain (VTG) in power converter low power planes. The advantage of the modeling approach is the ease with which typical noise reduction devices such as decoupling capacitors or ferrite beads can be integrated into the model. This feature is enforced by a new modular approach based on effective matrix partitioning, which is presented in the paper. This partitioning is used to decouple power plane equations from external device impedance, which avoids the need for rewriting of a whole set of equation at every change. The model is quickly solved in the frequency domain, which is well suited for an automated layout optimization algorithm. Using frequency domain modeling also allows the integration of frequency-dependent devices such inductors and capacitors, which are required for realistic computation results. In order to check the precision of the modeling approach, VTGs for several layout configurations are computed and compared with experimental measurements based on scattering parameters.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.285-295
• /
• 2016

A contact strip shape of a high speed train pantograph system was optimized with CFD to increase the aerodynamic performance and stability of contact force, and the results were validated by a wind tunnel test. For design of the optimal contact strip shape, a Kriging model and genetic algorithm were used to ensure the global search of the optimal point and reduce the computational cost. To enhance the performance and robustness of the contact strip for high speed pantograph, the drag coefficient and the fluctuation of the lift coefficient along the angle of attack were selected as design objectives. Aerodynamic forces were measured by a load cell and HWA (Hot Wire Anemometer) was used to measure the Strouhal number of wake flow. PIV (Particle Image Velocimetry) was adopted to visualize the flow fields. The optimized contact strip shape was shown a lower drag with smaller fluctuation of vertical lift force than the general shaped contact strip. And the acoustic noise source strength of the optimized contact strip was also reduced. Finally, the reduction amount of drag and noise was assessed when the optimized contact strip was applied to three dimensional pantograph system.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.270-276
• /
• 2024

In this study, we analyzed the stick slip characteristics through friction experiments on materials used in mechanical and electronic products, and propose improvements to reduce abnormal noise generated inside refrigerators. To analyze the stick slip phenomenon of the materials, we fabricated a friction testing device and conducted friction experiments. Additionally, we measured the vibration and noise levels of internal components to analyze the occurrence and location of abnormal noise inside the refrigerator. By comparing the results of the refrigerator's phenomenon analysis and friction experiment, we confirm that the abnormal noise occurring inside the refrigerator is caused by the stick slip phenomenon of internal components. Finally, to propose improvements for abnormal noise reduction, we performed friction experiments using the Taguchi method and validated the performance of the proposed improvements by applying them to refrigerators.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.15-20
• /
• 2017

Recently, with the development of the IT industry, interest in computer convergence technology is increasing in various fields. Especially, in the semiconductor field, a vision system that uses a camera and computer convergence is often used to inspect semiconductor device defects in the production process. Various systems have been studied to remove noise, which is a major cause of degradation in processing of data related to these image processing systems. In this paper, we try to detect defects in BGA (Ball Grid Array) package devices by recognizing defects in advance during mass production. We propose a measurement system using a Gaussian filter, a Median filter, and an Average filter, which are widely used for noise reduction of image data Applying the proposed system to the manufacturing process of the BGA package can be used to judge whether the defect is good or not, and it is expected that productivity will be improved.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.853-858
• /
• 2020

This paper proposes a 2-ch DC-DC converter for OLED display with immunity against RF noise inserted from communication device. For RF signal immunity, an input voltage variation reduction circuit that attenuates as much as the input voltage variation is embedded. The boost converter for positive voltage V_POS operates in SPWM-PWM dual mode and has a dead time controller to increase power efficiency. The inverting charge pump for negative voltage V_NEG is a 2-phase scheme and operates in PFM using VCO to reduce output ripple voltage. Simulation results using 0.18 ㎛ BCDMOS process show that the overshoot and undershoot of the output voltage decrease from 10 mV to 2 mV and 5 mV, respectively. The 2-ch DC-DC converter has power efficiency of 39%~93%, and the power efficiency of the boost converter is up to 3% higher than the conventional method without dead time controller.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.45-54
• /
• 2015

In the case of railway facilities in cities such as a railway station or a bridge, the significance of design for reducing vibration and noise is getting more significant. The vibration control solution is in need especially for an elevated railway station to block vibration of a train and secondary noise effectively. Even though a vertical vibration isolation device is able to be applied effectively to railway facilities such as elevated railway stations which transfer vibration directly from a train to a structure, the development of the vertical device is much slower than a horizontal vibration isolation device. In this paper, a vibration isolation device using wedge type friction material which is currently developing to reduce train-induced vibration effectively is introduced and test results for verification of dynamic performance is also presented. The vibration test on a concrete structure equipped with the developed vibration isolation device is conducted through which the isolation performance and dynamic properties are verified and needs for improving the performance of the device is identified.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.157-164
• /
• 2015

The existing input device is limited to keyboard and mouse. However, recently new type of input device has been developed in response to requests from users. To reflect this trend we propose the new type of input device that gives instruction as analyzing the hand motion of image without special device. After binarizing the skin color area using Cam-Shift method and tracking, it recognizes the hand motion by inputting the finger areas and the angles from the palm center point, which are separated through labeling, into four cardinal directions and counting them. In cases when specific background was not set and without gloves, the recognition rate remained approximately at 75 percent. However, when specific background was set and the person wore red gloves, the recognition rate increased to 90.2 percent due to reduction in noise.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.265-273
• /
• 2012

Data stability and leakage power dissipation have become a critical issue in scaled SRAM design. In this paper, an advanced 8T SRAM cell improving the read and write stability of data storage elements as well as reducing the leakage current in the idle mode is presented. During the read operation, the bit-cell keeps the noise-vulnerable data 'low' node voltage close to the ground level, and thus producing near-ideal voltage transfer characteristics essential for robust read functionality. In the write operation, a negative bias on the cell facilitates to change the contents of the bit. Unlike the conventional 6T cell, there is no conflicting read and write requirement on sizing the transistors. In the standby mode, the built-in stacked device in the 8T cell reduces the leakage current significantly. The 8T SRAM cell implemented in a 130 nm CMOS technology demonstrates almost 100 % higher read stability while bearing 20 % better write-ability at 1.2 V typical condition, and a reduction by 45 % in leakage power consumption compared to the standard 6T cell. The stability enhancement and leakage power reduction provided with the proposed bit-cell are confirmed under process, voltage and temperature variations.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1063-1068
• /
• 2007

The present study describes the effects of music and vibroacoustic stimuli to the relaxation of human body. We have carried out the experiment on 6 human subjects of which are composed 3men and 3women. We have investigated the electroencephalogram(EEG) of all subjects before and after the stimuli of which are made a strong noise or the meditatiom music and the acoustic vibration. The vibroacoustic device has transmitted meditation music as vibration between 20Hz and 250Hz to the body. From the experimental results, we made sure the effects that the meditation music and vibroacoustic stimuli influenced the stress reduction of human body for good as alpha-wave was increased continuously during the good stimuli and after that.