• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.23-27
• /
• 2000

Simultaneous Switching Noise (SSN) propagated through parallel power and ground planes in high-speed multilayer printed circuit boards (PCBs) causes malfunction of both digital and analog circuits. To reduce SSN, decoupling capacitors are generally used in the PCBs. In this paper, we improve the equivalent circuit model of decoupling capacitor in high-frequency range to analyze the effect of SSN reduction accurately. The analysis is performed by the microwave and RF design system (MDS) method and the finite difference time domain (FDTD) method. We compared the results by the ideal capacitor model with those by the proposed model.

• Communications of the Korean Mathematical Society
• /
• v.33 no.4
• /
• pp.1367-1376
• /
• 2018

In practice, the density function of a random variable X is always unknown. Even its smoothness parameter is unknown to us. In this paper, we will consider a density smoothness parameter estimation problem via wavelet theory. The smoothness parameter is defined in the sense of equivalent Besov norms. It is well-known that it is almost impossible to estimate this kind of parameter in general case. But it becomes possible when we add some conditions (to our proof, we can not remove them) to the density function. Besides, the density function contains impurities. It is covered by some additive noises, which is the key point we want to show in this paper.

• Journal of Sensor Science and Technology
• /
• v.10 no.2
• /
• pp.86-90
• /
• 2001

A pyroelectric senior using P(VDF/TrFE) film for sensing materials has been fabricated and evaluated with other commercial pyroelectric sensors that use ceramic materials for sensing. The device was mounted in a TO-5 housing to detect infrared light of $5.5{\sim}14\;{\mu}m$ wavelength. The NEP (noise equivalent power) and specific detectivity $D^*$ of the device were $2.13{\times}10^{-8}\;W$ and $9.37{\times}10^6\;cm/w$ respectively under emission energy of $13\;{\mu}W/cm^2$ respectively. These result shows a better characteristics than other commercial pyroelectric sensors NEP $8.08{\times}10^{-7}\;W$ and $D^*$ $2.47{\times}10^5\;cm/w$.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.187-191
• /
• 2004

Rapid time variations of the mobile communication channel have a dramatic effect on the performance of multi-carrier modulation. This paper analyzed the bit error rate (BER) performance for multi-carrier code division multiple access (MC-CDMA) network, and derived the equivalent signal-to-total noise plus interference(SNIR) of MC-CDMA system in the reverse link, the performance of MC-CDMA/BPSK signal is evaluated taking into account the fraction of partial-band interference and interference power. and the effect of partial-band interference is comprehensively studied in order to further improve the Qos of multi-carrier multimedia system.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.199-201
• /
• 2020

본 논문은 DC-DC 컨버터 스위칭 동작 시 입력 단에 영향을 미치는 차동 노이즈 분석을 위한 고주파 등가모델을 제안하였으며, DC-DC 벅 컨버터 프로토타입을 제작하고 실험을 통해 검증하였다. 고주파 등가모델에는 DC 부스바, IGBT 및 PCB 등에 포함되는 기생 임피던스 성분들을 모두 고려하였으며, DC-DC 컨버터의 온/오프 스위칭 동작에 따른 차동모드 노이즈 영향 분석을 위한 수학적 모델을 개발하였다. 실험구성은 벅 컨버터, 스펙트럼 분석기, 네트워크 분석기 및 LISN 장비로 구성하였으며, 150kHz ~ 30MHz의 주파수 범위 내에서 측정된 공진주파수가 제안된 고주파 등가 모델의 분석결과와 실험결과가 일치함을 도출함으로써 제안된 등가 모델의 타당성을 검증하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.80-86
• /
• 2014

A low-noise readout circuit is studied for 2-D capacitive microbolometer focal plane arrays (FPAs). In spite of the merits of the integration method, a simple and effective pixelwise readout circuit without integration is used for input circuit because of a small pixel size and narrow noise bandwidth. To reduce the power consumption and the kT/C noise, which is the dominant noise of the capacitive microbolometer FPAs with small capacitance, a new correlated double sampling (CDS) is used for columnwise circuit. The proposed circuit has been designed using a $0.35-{\mu}m$ 2-poly 4-metal CMOS process for a microbolometer array with a pixel size of $50{\mu}m{\times}50{\mu}m$. The proposed circuit effectively reduces the kT/C noise and the other low-frequency noise of microbolometer, and the noise characteristics of the fabricated chip have been verified by measurements. The rms noise voltage of the proposed circuit is reduced from 30 % to 55 % compared to that of the simple readout input circuit, and the noise equivalent temperature difference (NETD) of the proposed circuit is very low value of 21.5 mK.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.538-545
• /
• 2002

In the orthogonal frequency division multiplexing (OFDM) system, the nonlinear distortion in the high power amplifier(HPA) degrades the system performance because of the high peak-to-average power ratio (PAPR). In this paper, a semi-analytical method is newly proposed for the performance evaluation of the nonlinearly distorted OFDM communication system. In the proposed method, at first, the probability density function (pdf) of the PAPR is generated by computer simulation. Then, mean and variance of the non-linear distortion noise process are computed. Next, the overall BER is found by the analytical method. When the equivalent SSPA model is applied in case of the QPSK/16-QAM and AWGN channel, the BER is calculated for the variation of the IBO(input back-off) and PAPR parameter. It is shown that the results by proposed method are very similar to those of the conventional Monte-Carlo method. The computation time can be considerably reduced than the conventional method that depends on the magnitudes of BER and IBO.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.118-125
• /
• 2003

This paper presents a 5.8-㎓ oscillator that uses a novel defected ground structure(DGS), which is etched on the metallic ground plane. As the suggested defected ground structure is the structure for mounting an active device, it is the roles of a feedback loop inducing a negative resistance as well as a frequency-selective circuit. Applying the feedback loop between the drain and the gate of a FET device produces precise phase conversion in the feedback loop. The equivalent circuit parameters of the DGS are extracted by using a three-dimensional EM simulation ,md simple circuit analysis method. In order to demonstrate a new DGS oscillator, we designed the oscillator at 5.8-㎓. The experimental results show 4.17 ㏈m output power with over 22 % dc-to-RF power efficiency and - 85.8 ㏈c/Hz phase noise at 100 KHz offset from the fundamental carrier at 5.81 ㎓.

• Journal of information and communication convergence engineering
• /
• v.14 no.3
• /
• pp.171-176
• /
• 2016

In this study, we investigate the physical layer secrecy performance of RF energy harvesting (EH) networks over Rayleigh fading channels. The RF-EH system considered here consists of one power transfer station, one source, one destination, and multiple passive eavesdroppers. The source harvests energy from the power transfer station and transmits the information to the destination by using a time switching-based relaying protocol. The eavesdroppers try to extract the transmitted information without an active attack. By using the statistical characteristics of the signal-to-noise ratio (SNR), the exact closed-form expressions of the existence probability of the secrecy capacity and the secrecy outage probability are derived. Further, we analyze the secrecy performance of the system with respect to various system parameters, such as the location of the system elements and the number of eavesdroppers. Finally, the equivalent Monte Carlo simulation results are provided to confirm the correctness of our calculations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.175-181
• /
• 2015

In this study, a lithium polymer battery (LiPB) is simply expressed by a primary RC equivalent model. The PI state observer is designed in Matlab/Simulink. The non-linear relationship with the OCV-SOC is represented to be linearized with 0.1 pu intervals by using battery parameters obtained by constant-current pulse discharge. A state equation is configured based on battery parameters. The state equation, which applied Peukert's law, can estimate SOC more accurately. SOC estimation capability was analyzed by utilizing reduced Federal Test Procedure (FTP-72) current profile and using a bi-directional DC-DC converter at temperature ($25^{\circ}C$). The PI state observer, which is designed in this study, indicated a SOC estimation error rate of ${\pm}2%$ in any of the initial SOC states. The PI state observer confirms a strong SOC estimation performance despite disturbances, such as modeling errors and noise.