• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.114-117
• /
• 2011

A thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated and then thin 1.6 ${\mu}m$ thickness P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated also. These thick and thin P(VDF/TrFE) film pyroelectric infrared ray sensor was mounted in TO-5 housing to detect infrared light of 5.5 ~ 14 ${\mu}m$ wavelength for human body detecting with each other. The noise output voltage of the thick P(VDF/TrFE) film pyroelectric infrared ray sensor were 380 mV and NEP(noise equivalent power) is $3.95{\times}10^{-7}$ W which is the similar value with the commercial pyroelectric infrared ray sensor using ceramic materials as a sensing material. The NEP and specific detectivity $D^*$ of the thin P(VDF/TrFE) film pyroelectric infrared ray sensor were $2.13{\times}10^{-8}$ W and $9.37{\times}106$ cm/W under emission energy of 13 ${\mu}W/cm^2$ respectively. These result caused by lower thermal diffusion coefficient of a thin 1.6 ${\mu}m$ thickness PVDF/TrFE film than the thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor.

• ETRI Journal
• /
• v.46 no.4
• /
• pp.708-715
• /
• 2024

We propose a 10-GHz 2 × 2 phased-array radio frequency (RF) receiver with an 8-bit linear phase and 15-dB gain control range using 65-nm complementary metal-oxide-semiconductor technology. An 8 × 8 phased-array receiver module is implemented using 16 2 × 2 RF phased-array integrated circuits. The receiver chip has four single-to-differential low-noise amplifier and gain-controlled phase-shifter (GCPS) channels, four channel combiners, and a 50-Ω driver. Using a novel complementary bias technique in a phase-shifting core circuit and an equivalent resistance-controlled resistor-inductor-capacitor load, the GCPS based on vector-sum structure increases the phase resolution with weighting-factor controllability, enabling the vector-sum phase-shifting circuit to require a low current and small area due to its small 1.2-V supply. The 2 × 2 phased-array RF receiver chip has a power gain of 21 dB per channel and a 5.7-dB maximum single-channel noise-figure gain. The chip shows 8-bit phase states with a 2.39° root mean-square (RMS) phase error and a 0.4-dB RMS gain error with a 15-dB gain control range for a 2.5° RMS phase error over the 10 to10.5-GHz band.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.5
• /
• pp.57-63
• /
• 2008

This paper presents a seismic response prediction method using vibration tests of cabinet-type electrical equipment installed in a nuclear power plant. The proposed method consists of three steps: 1) identification of earthquake-equivalent forces based on lumped-mass system idealization, 2) identification of a state-space-equation model relating input-output measurements obtained from the vibration tests, 3) seismic prediction using the identified earthquake-equivalent forces and the identified state-space-equation. The proposed method is advantageous compared to other methods based on FEM (finite element method) model update, since the proposed method is not influenced by FEM modeling errors. Through a series of numerical verifications on a frame model and 3-dimensional shell model, it was found that the proposed method could be used to accurately predict the seismic responses, even under considerable measurement noise conditions. Experimental validation is needed for further study.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.409-412
• /
• 2002

The LNA(Low Noise Amplifier) is designed for use in low cost commercial application covered fully IMT-2000 band(1920~2170MHz, BW=250MHz). It is optimized source inductance for source lead and designed to equivalent etched line. The LNA uses a high pass impedance matching network for noise match and simple structure. The bias circuit designs have been made self-biased with a negative voltage applied to gate. The power supply voltage is 8V, total current is 180mA. The LNA is biased at a Vgs of -0.4, Vds of 4V for first stage and Vds of 5V for second stage. The LNA is designed competitively for commercial product specification. The measured gain and noise figure of the completed amplifier was 20dB and 1dB, respectively. Also, input VSWR, P1dB and gain flatness was measured of 1.14 ~ l.3dB, 22.4dBm and $\pm$0.45dB, respectively. The designed LNA can be used for commercial product.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.605-608
• /
• 1998

In this paper, we have investigated the pyroelectric characteristics of the $20\mu\textrm{m}-thick$ $LiTaO_3$ single crystal with black coating by using the nondestructive dynamic method. The $LiTaO_3shows$ the maximum pyroelectric coefficient (${\gamma}$) of $1.56$\times$10-8C/\textrm{cm}^2K$ at 40Hz and the responsivity (Rv) is 488V/W at 2Hz. The noise equivalent power (NEP) is obtained as 3.95$\times$10-10W/√Hz at 40Hz. The detectivity (D*) is obtained divided by the sample area and estimated to be 5.6$\times$108cm√Hz/W at 40Hz. These results, shows that the $LiTaO_3$ single crystals are the best candidates to pyroelectric IR sensors.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.3
• /
• pp.98-103
• /
• 2004

Diesel engine offers superior fuel consumption than gasoline engine of equivalent capacity. For this reason, diesel engines are widely used in heavy duty transport applications. Specially, it has been many years that exhaust gases from gasoline automobile rather than from diesel is the major object concerned by Korea and other countries, and it is strongly required on the reduction techniques on harmful NOx, Soot, CO, He. Thus, this paper focused on the emission reduction and target for this paper is heavy-duty diesel engine equipped with power filter such as wet type air cleaner. In this paper, the performance, exhaust emissions(CO, THC, NOx, Soot) and noise of heavy-duty diesel engine were measured at maximum load condition and the range of 1,000∼2,200rpm. The smoke was measured at FAS(Free Accel Smoke) test mode.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.631-636
• /
• 1997

A method to estimate the radiatio power to the surrounding formation due to axial vibration of the pipe in a fluid-filled borehole has been developed, by using the propagation modes of stress wave in an infinitely-long and uniform drilling borehole surrounded by a radially-infinite homogeneous formation. Also, the equivalent damping coefficient for the axial vibration of the pipe has been derived. As an example, results for a real drilling borehole has been presented. The analysis of the elastic motion of the infinite formation which has cylidrical cavity is simplified with the geometric axisymmetry and the low-frequency assumption so that the analytic solution is obtained.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.12C no.4
• /
• pp.225-228
• /
• 2002

The pyroelectric sensor of P(VDF/TrFE) film as sensing materials has been fabricated and evaluated with another commercial pyroelectric sensor using ceramic materials for sensing, The device was mounted in TO-5 housing to detect infrared light of a 5.5~14 ${\mu}{\textrm}{m}$ wavelength. The NEP(noise equivalent power) and specific detectivity D* of the device were 2.13$\times$10$^{-8}$ W and 9.37 10$^{6}$ cm/W under emission energy of 13 ㎼/$\textrm{cm}^2$, respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.06b
• /
• pp.270-275
• /
• 1998

It was assumed that the voice of cattle is generated with the virtual white noise through the digital filter called the linear prediction filter, and filter parameters (prediction coefficients) were estimated by the maximum entropy method (MEM) , using the sound signal of the animal . The feature planes were defined by the pairs of two parameters selected appropriately from these parameters. The cattle voices were divided into three levels, that is the high, medium and low levels according to their total power equivalent to the variances of the sound signal . It was found that the straight lines could be used for recognizing tow cow and one calf for high level voices. For high and medium level voices, however, it was difficult or impossible to recognize individual cattle on the parameters planes.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.56-57
• /
• 2014

본 논문에서는 $LiCoO_2$ 원통형(cylindrical)셀을 확장칼만필터(extended Kalman filter; EKF) 추정알고리즘에 적용 시 등가회로모델 차이에 따른 SOC(State-of-charge) 추정성능의 비교 분석을 진행하였다. 첫 번째, 등가회로 모델의 성능을 좌우하는 RC-ladder의 개수에 따른 SOC 추정성능의 차이를 비교하였고, 두 번째, 모델 단순화에 따른 불가피한 모델의 에러를 줄이고자 사용되는 노이즈 모델(noise model) 및 데이터 리젝션(data rejection)의 유무에 따른 SOC 추정성능을 비교분석 하였다.