• Journal of Korean Association for Spatial Structures
• /
• v.18 no.3
• /
• pp.67-74
• /
• 2018

Recently, measuring instruments for SHM of structures has been developed. In general, the wireless transmission of sensor signals, compared to its wired counterpart, is preferable due to the absence of triboelectric noise and elimination of the requirement of a cumbersome cable. However, in extreme environments, the sensor may be less sensitive to temperature changes and to the distance between the sensor and data logger. This may compromise on the performance of the sensor and instrumentation. Therefore, in this paper, free vibration experiments were conducted using wireless MEMS sensors at an actual site. Measurement was assessed in time and frequency domain by changing the temperature variation at($-8^{\circ}C$, $-12^{\circ}C$ and $-16^{\circ}C$) and the communication distance (20m, 40m, 60m, 80m).

• Journal of Power Electronics
• /
• v.6 no.1
• /
• pp.45-51
• /
• 2006

A new high efficiency phase shifted full bridge (PSFB) converter for the power sustaining module of a plasma display panel (PDP) is proposed in this paper. The proposed converter employs a voltage doubler rectifier without an output inductor. Since it has no output inductor, the voltage stresses of the secondary rectifier diodes can be clamped at the output voltage level. No dissipative resistor-capacitor (RC) snubber for rectifier diodes is needed. Therefore, high efficiency, as well as, a low noise output voltage can be realized. Due to the elimination of the large output inductor, it features a simple structure, lower cost, smaller mass and lighter weight. Furthermore, the proposed converter has wide zero voltage switching (ZVS) ranges with low current stresses of the primary switches. Also the resonance between the leakage inductor of the transformer and the capacitor of the voltage doubler cell reduces the current stresses of the rectifier diodes. In this paper, operational principles, an analysis of the proposed converter and experimental results are presented.

• Annual Conference on Human and Language Technology
• /
• 2013.10a
• /
• pp.64-69
• /
• 2013

스마트폰의 대중화로 인하여 앱 마켓 시장이 급속도로 성장하였다. 이로 인하여 하루에도 수십개의 새로운 앱들이 출시되고 있다. 이러한 앱 마켓 시장의 급격한 성장으로 인해 사용자들은 자신이 흥미를 가질만한 앱들을 선택하는데 큰 어려움을 겪고 있어 앱 추천 방법에 대한 연구에 많은 관심이 집중되고 있다. 기존 연구에서 협력 필터링 기반의 추천 방법들을 제안하였으나 이는 콜드 스타트 문제를 지니고 있다. 이와는 달리 컨텐츠 기반 필터링 방식은 콜드 스타트 문제를 효율적으로 해소할 수 있는 방법이지만 앱설명에는 광고, 공지사항등 실질적으로 앱의 특징과는 무관한 노이즈들이 다수 존재하고 이들은 앱 사이의 유사관계를 파악하는데 방해가 된다. 본 논문에서는 이런 문제를 해결하기 위하여 앱 설명에서 노이즈에 해당하는 설명들을 자동으로 제거할 수 있는 모델을 제안한다. 제안하는 모델은 모바일 앱 설명을 구성하고 있는 각 문단을 LDA로 학습된 토픽들의 비율로 나타내고 이들을 분류문제에서 우수한 성능을 보이는 SVM을 이용하여 분류한다. 실험 결과에 따르면 본 논문에서 제안한 방법은 기존에 문서 분류에 많이 사용되는 Bag-of-Word 표현법에 기반한 문서 표현 방식보다 더 나은 분류 성능을 보였다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.117-121
• /
• 2007

A fundamental problem in the in-line digital holography microscope is that the real image and virtual image and zero-order image are not separated spatially. In this paper, we have eliminated the zero-order noise by an averaging method and the twin image is divided using a geometrical set-up in an in-line digital holographic microscope. The size of the virtual image depends on the distance between the objective lens and the hologram plane and on the distance between the hologram plane and the image plane. We found that the virtual image size is smallest when the distance between the objective lens and the hologram plane is equal to the back focal length of the objective lens. We could divide the virtual image and real image by controlling the distance between the hologram plane and the objective lens.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.12
• /
• pp.671-678
• /
• 1999

In this study, it has been aimed that the accuracy of position control be increased by microstep drive to the 2 phase 8 pole HB type prototype of linear pulse motor of which winding are applied sine wave current and the vibration and noise in the lower speed region be decreased. The fixed off-time method which controls the exciting current bandwidth, was applied to the microstep current controller. When the LPM was driven 1/8 microstep its accuracy of position was 0.109[mm] (=tooth pitch 3.5[mm] ). Also, the elimination method of harmonics in the static thrust force is proposed. It was confirmed that the position error range of the prototype LPM was $\pm$0.2[mm].

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.854-860
• /
• 2004

The result of fingerprint matching is different as the quality or the state of input fingerprint image. We can extract the false direction information when the quality of fingerprint is degraded by the noise or the scars of the ridges. The information of the direction is very important for the elimination of the false minutia, the measurement of the ridge distance, matching, finding of cores and deltas. We need the method which can compensate or correct the false information of directions because the false directions include serious errors in the fingerprint recognition. We propose a method which can compensate or correct the false direction of fingerprint with a \alpha$-trimmed mean filter followed by LPF to reconstruct the false direction information when fingerprints are corrupted by scars.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.594-597
• /
• 2010

This paper proposes a fire detection algorithm using low-cost camera to detect visual features of fire. In the previous work sensor cameras were used, but here we use very simple cameras. This method uses YCbCr and YIQ color model to detect candidate regions of fire. The candidate areas are extracted from the boundaries of the fire. noise removal elimination is performed. Regardless of environmental changes around the fire area, the results of the proposed algorithm are very satisfactory.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1035-1042
• /
• 1988

The acoustic emission(AE) signal is monitored in milling operation in order to investigate the relationship between the progressive tool wear and the AE signals. A signal processing technique so called time domain averaging(TDA) is presented for the elimination of the influences of the noise imbedded in the periodic signals. The relationship between the progressive tool wear and the AE signals is investigated by varying the cutting speed, feed, depth of cut and the number of insert. From the measured data, it is observed that the averaged level of the AE signal increases at first with the increase of flank wear to a certain critical value, and then stays almost constant or fluctuates with further increase of the flank wear.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.141-151
• /
• 2006

A blank test was done to calculatee the car itself's magnetic effect as noise and to eliminate it from the data set of total magnetic intensity(=magnetic flux density) exploration in a car-borne magnetic exploration system. To calculate the induced magnetic intensity(= magnetization) and the remanent magnetic intensity(= magnetization) of the car itself, we have installed the magnetometer on a fixed point and measured the magnetic intensity letting the car move around the magnetometer, and we have changed the data set into an analogous data set as if acquired in the condition that we have parked the car on the same fixed point and measured the magnetic intensity moving the magnetometer around the magnetometer. Through an inversion with the later data set as input, we have calculated the magnetic center and the magnetic moments of the induced magnetic intensity(= magnetization) and the remanent magnetic intensity(= magnetization) of the car itself with the two centers coincided because of some barriers of the inversion algorithm that we have used in this study. On the other hand, we have extracted the magnetic anomaly by reducing i. e. vectorially eliminating the induced magnetic intensity(= magnetization) and the remanent magnetic intensity(= magnetization) of the car itself calculated forwardly, from the magnetic exploration data set acquired by the car-borne magnetic exploration system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.239-248
• /
• 2006

In this paper, the cryogenically cooled low noise amplifier module for radio telescope receiver front-end using pHE-MT MMIC is designed and fabricated. In the selection of MMIC, the MMIC fabricated with the pHEMTS providing successful cryogenic operation are chosen. They are mounted in the housing using the thin film substrate. In the design of the housing, the absorber and the elimination of the gap between the carrier and the housing as well removed the unnecessary oscillations by its structure. The mismatch is improved by ribbon-tuning to provide the best performance at room temperature. The fabricated module shows the gain of $35dB{\pm}1dB$ and the noise figure of $2.37{\sim}2.57dB$ at room temperature over $21.5{\sim}23.5GHz$. In the cryogenic temperature of $15^{\circ}K$ cooled by He gas, the measured gain was above 35 dB and flatness ${\pm}2dB$ and the noise temperatures of $28{\sim}37^{\circ}K$.