• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.6
• /
• pp.681-689
• /
• 2008

This paper is concerned with the free vibration analysis of a circular plate with an eccentric circular hole by the Independent coordinate coupling method(ICCM). It was proved in the previous study that the ICCM can accurately predict the natural frequencies and mode shapes of the annular plates and can also be used for the free vibration analysis of the simply-supported circular plate with an eccentric circular hole. In this study, the clamped and free boundary conditions were considered for the circular plate. The numerical results show that the ICCM can be used effectively for the free vibration problem of circular plate with an eccentric hole compared to the finite element method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.220-225
• /
• 2007

Free vibration analysis using the method of NDIF (non-dimensional dynamic influence function), which was developed by the author, is extended to arbitrarily shaped polygonal plates with free edges. Local Cartesian coordinate systems are employed to apply the free boundary condition to nodes distributed along the edges of the plate of interest. Furthermore, a new way for applying the free boundary condition to nodes located at corners of the plate is for the first time introduced by considering the phenomenon of stress concentration at the corners. Two case studies show that the proposed method is valid and accurate when the eigenvalues by the proposed method are compared to those by FEM(ANSYS).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.995-999
• /
• 2001

This paper deals with the free vibrations of arches with general boundary condition. Based on the dynamic equilibrium equations of a arch element acting the stress resultants and the inertia forces, the governing differential equation is derived for the in-plane free vibration of such arches. Differential equations are solved numerically to calculate natural frequencies. In numerical examples, the parabolic arch is considered. The effects of the arch rise to span length ratio, the slenderness ratio, the vertical spring coefficient and the rotational spring coefficient on the natural frequencies are analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.572-573
• /
• 2012

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.357-358
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.721-722
• /
• 2011

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.977-983
• /
• 2003

Free vibration analysis of helical springs was performed by the use of the commercial finite element analysis program, ANSYS. The investigation of national frequency was focused on the effect of various parameters such as boundary conditions, spring indices, number of coil turns and helix angles which are considered to affect the free vibration of a spring. The finite element method was validated by comparison with the result of a previouosly published literature. The similarity of frequency trend was shown among three boundary conditions: clamped-clamped, free-free, simpliy supported-simply supported but there was no similarity in light of mode shapes among them. Several modes showed similar frequencies on and near the frequencies identified by the natural frequency formula of Wahl. Natural frequencies increased with spring indices and number of turns decreasing and with helix angles increasing. The results investigated by finiete element method were compared with the experemental result and theoretical result and showed a good agreement among them.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.307-312
• /
• 1996

A torsional vibration analysis of a multi-stage reduction gear box connected to a gas turbine system is presented. For a free vibration analysis the Modified Hibner Branch Method, so called "Blank Matrix Method", and the .lambda.-Matrix Method are used in the modeling and the eigenvalue solution, respectively. Also, a short circuit forced analysis of the system is performed, utilizing the energy method modeling. It is shown that the results of the free vibration analysis have the same tendency as those of the short circuit analysis. analysis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.377-384
• /
• 2009

Noise & vibration-free screw pile method is being developed for solution of noise and vibration problem in existing pile method. In this paper, prior to pilot test construction, conditions which a PHC pile and a screw PHC pile were constructed into ground were modeled by finite element code and through the parametric study in cohesive soils, the behaviors of two kinds of pile according to soil characteristics were compared.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.709-712
• /
• 2004

A study of the coupled flexural-torsional vibrations of thin-walled beams with monosymmetric cross-section is presented. The governing differential equations for free vibration of such beams are solved numerically to obtain natural frequencies and their corresponding mode shapes. The beam model is based on the Bernoulli-Euler beam theory and the effect of warping is taken into consideration. Numerical results are given for two specific examples of beams with free-free, clamped-free, hinged-hinged, clamped-hinged and clamped-clamped end constraints both including and excluding the effect of warping stiffness. The effect of warping stiffness on the natural frequencies and mode shapes is discussed and it is concluded that substantial error can be incurred if the effect is ignored.