• 제목/요약/키워드: Noise Reduction Technology

검색결과 610건 처리시간 0.026초

친환경 항공을 위한 소음 저감 기술 동향 (Technology Trends for Green Aviation Noise Reduction)

  • 위성용;황창전;정기훈;안오성
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2013년도 추계학술대회 논문집
    • /
    • pp.241-246
    • /
    • 2013
  • The regulation of the aircraft noise has been more strengthened with expansion of the environmental issue. This trend has encouraged the R&D of the noise reduction technology. In this paper, the international efforts for aircraft noise reduction and the related technology were investigated. The aircraft noise sources were also introduced briefly. Additionally, the noise prediction method was explained at the end of paper.

  • PDF

400 km/h급 고속철도의 소음저감을 위해 방음벽 상부에 설치하는 소음저감장치 개발에 관한 연구 (A Study on the Development of a Noise Reduction Device Installed at the Top of Noise Barrier for the 400 km/h Class High-speed Railroad)

  • 윤제원;김영찬;장강석;홍병국;엄기영
    • 한국소음진동공학회논문집
    • /
    • 제23권9호
    • /
    • pp.823-830
    • /
    • 2013
  • The purpose of this study is to develop a noise reduction device installed at the top of noise barrier for further decreasing of noise level of 400 km/h class high-speed railroad. For this, the frequency spectrum of 400 km/h class high-speed railroad was analyzed through the field noise test, and the tuning frequency was determined to design a noise reduction device. The noise reduction device was designed to have noise reduction performance of at least 3 dB(A) using the prediction method(2D BEM) and through the laboratory test with the prototype. Finally, the outdoor test showed that this device could decrease noise level of 400 km/h class high-speed railroad even more than 3 dB(A).

로터 끝 슬롯의 공기역학적 효과에 대한 실험 연구 (Experimental study on the aerodynamic effects of slots at a rotor tip)

  • 신이수;이승철;김주하
    • 한국가시화정보학회지
    • /
    • 제21권3호
    • /
    • pp.39-48
    • /
    • 2023
  • In this study, we investigate the effects of slots installed on the tip of a rotor blade on aerodynamic characteristics. The slots weaken the strength and spatial coherence of the tip vortex at early vortex age and accelerate the dissipation of the generated tip vortex. Accordingly, the turbulence intensity of the rotor wake is reduced at both near and far wake, which leads to a reduction in broadband noise. Tonal noise is also reduced by mitigation of tip vortices, but tonal noise reduction is limited to a narrower range of azimuths than broadband noise due to the extinction of tip vortices. In addition, slots reduce both mean thrust and thrust fluctuations. Reduction in thrust fluctuations leads to a reduction in blade loading noise, resulting in a reduction in tonal noise.

Research on Noise Reduction Algorithm Based on Combination of LMS Filter and Spectral Subtraction

  • Cao, Danyang;Chen, Zhixin;Gao, Xue
    • Journal of Information Processing Systems
    • /
    • 제15권4호
    • /
    • pp.748-764
    • /
    • 2019
  • In order to deal with the filtering delay problem of least mean square adaptive filter noise reduction algorithm and music noise problem of spectral subtraction algorithm during the speech signal processing, we combine these two algorithms and propose one novel noise reduction method, showing a strong performance on par or even better than state of the art methods. We first use the least mean square algorithm to reduce the average intensity of noise, and then add spectral subtraction algorithm to reduce remaining noise again. Experiments prove that using the spectral subtraction again after the least mean square adaptive filter algorithm overcomes shortcomings which come from the former two algorithms. Also the novel method increases the signal-to-noise ratio of original speech data and improves the final noise reduction performance.

유한요소법을 활용한 3D Textile 구조적용에 따른 층간소음저감 연구 (A Study on Interlayer Noise Reduction through Application of 3D Textile Structures using Finite Element Method)

  • 이재민;장일영
    • 한국산업융합학회 논문집
    • /
    • 제27권3호
    • /
    • pp.527-534
    • /
    • 2024
  • In this study, focuses on noise reduction between floors in the civil and architectural fields. Specifically, it investigates the application of newly developed 3D Textile to slabs to reduce interfloor noise. The effect of 3D Textile, through performance analysis via experiments and noise analysis using finite element method, provides a new understanding of noise reduction technology, and is expected to contribute to the improvement of living quality in residential spaces.

Fast non-local means noise reduction algorithm with acceleration function for improvement of image quality in gamma camera system: A phantom study

  • Park, Chan Rok;Lee, Youngjin
    • Nuclear Engineering and Technology
    • /
    • 제51권3호
    • /
    • pp.719-722
    • /
    • 2019
  • Gamma-ray images generally suffer from a lot of noise because of low photon detection in the gamma camera system. The purpose of this study is to improve the image quality in gamma-ray images using a gamma camera system with a fast nonlocal means (FNLM) noise reduction algorithm with an acceleration function. The designed FNLM algorithm is based on local region considerations, including the Euclidean distance in the gamma-ray image and use of the encoded information. To evaluate the noise characteristics, the normalized noise power spectrum (NNPS), contrast-to-noise ratio (CNR), and coefficient of variation (COV) were used. According to the NNPS result, the lowest values can be obtained using the FNLM noise reduction algorithm. In addition, when the conventional methods and the FNLM noise reduction algorithm were compared, the average CNR and COV using the proposed algorithm were approximately 2.23 and 7.95 times better than those of the noisy image, respectively. In particular, the image-processing time of the FNLM noise reduction algorithm can achieve the fastest time compared with conventional noise reduction methods. The results of the image qualities related to noise characteristics demonstrated the superiority of the proposed FNLM noise reduction algorithm in a gamma camera system.

400 km/h 고속철도 환경소음저감을 위한 선로 변 벽체 상단장치개발에 관한 연구 (A Study on the Device Installed on the Barrier for The Environmental Noise Reduction in 400 km/h High Speed Railway)

  • 장강석;김영찬;서효선;최찬용;박준홍
    • 대한환경공학회지
    • /
    • 제39권12호
    • /
    • pp.679-684
    • /
    • 2017
  • 고속열차의 설계 및 운행기술이 발전하면서 고속철도의 운행속도가 빠르게 증속되고 있다. 반면 증속 시 발생하는 소음으로 인해 고속철도 연변의 주거지역 등에서는 많은 소음문제가 발생하고 있으며, 고속철도 소음에 대한 민원도 지속적인 증가추세에 있다. 향후 고속철도가 원활히 설계속도대로 운행되기 위해서는 고속철도의 방사소음특성에 적합한 소음예측기술 및 저감기술이 개발되어야 한다. 이와 같은 요구에 부합하기 위해, 400 km/h 고속철도 인프라 연구가 수년에 걸쳐 진행되었다. 이 연구를 통해 신뢰성을 갖는 고속철도 소음예측평가 기술이 개발되었고, 현재 소음저감기술의 단점을 극복하기 위한 핵심방음장치가 개발되었다. 본 연구의 궁극적인 목적은 고속철도 환경소음을 줄이기 위해 개발된 선로 변 벽체 상단에 설치되는 상단장치의 소음성능평가 및 풍압안전성 검증에 관한 것이다.

통계적 방법을 이용한 복층 저소음포장의 소음저감효과 분석 (An Analysis on Noise Reduction Effects of Two-Layer Low Noise Pavements using Statistical Methods)

  • 이상혁;한대석;유인균;이수형
    • 한국도로학회논문집
    • /
    • 제19권6호
    • /
    • pp.1-11
    • /
    • 2017
  • PURPOSES : The purpose of this study is to compare noise reduction quantities between before/after two-layer low noise pavement implementation using equivalent noise level analysis and to analyze the noise reduction effects of the two layer low noise pavement with a statistical method such as the Anderson-Darling Test. METHODS : In order to compare and to analyze noise reduction effects between before/after two-layer low noise pavement implementation, data acquisition as noise levels on a roadside and an apartment rooftop was conducted in the study area. The equivalent noise level was estimated in order to compare noise reduction quantities and the Anderson-Darling Test was carried out for estimating noise reduction effects of the two-layer low noise pavement. RESULTS : The equivalent noise levels of before/after two-layer low noise pavement implementation for the roadside during the daytime are 65.355 dB and 63.520 dB and during the nighttime are 62.463 dB and 59.088 dB. The equivalent noise levels for the apartment rooftop during daytime are 57.301 dB and 59.088 dB and during the nighttime are 54.616 dB and 52.464 dB. Also two-layer low noise pavement decreased the noise reduction effects estimated with the statistical method as the Anderson-Darling test for the roadside during the daytime by around 66.68% and decreased noise reduction effects on the roadside during the nighttime by 0.70%. Moreover it reduced noise reduction effects in the apartment rooftop during the daytime and nighttime by 0% and 96.32%, respectively. CONCLUSIONS : Based on the result of this study, two-layer low noise pavement can positively affect noise reduction during both the daytime and nighttime according to the results of estimating the equivalent noise levels and the Anderson-Darling test.

건설기계의 소음저감기술 (Noise Fighting in Construction Equipments)

  • 이동욱
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.109-112
    • /
    • 2005
  • Since 1989, when the first European noise regulation against construction equipments came into force, much investigation had been devoted to reduce the noise and had produced the remarkable improvement in noise reduction technology. EU Directive 2000/14/EC Stage 2, more stringent noise regulation, is going to be implemented from Jan. 2006. The technology trends and examples for noise reduction in typical construction equipment R&D is described briefly.

  • PDF

도로변 완충녹지 구조에 따른 소음저감효과 평가 (Evaluation of Noise Decreasing Effects by Structures in Roadside Buffer Green)

  • 김정호;오득균;윤용한
    • 한국환경과학회지
    • /
    • 제24권5호
    • /
    • pp.647-655
    • /
    • 2015
  • In this study, to targeting Songpa of Seoul, were analyzed the effect on the noise mitigation in roadside buffer green spaces. Noise of Songpa Street buffer green space was determined to be higher during the day than at night. In addition, it was most of 60 db or more. However, the noise reduction function of the buffer green was not greatly affected by time. In the case of noise reduction rate, during the day time it was the order of the mounding type (18.14%)> plain type (5.73%)> slope type (4.08%), And, in the case of night time, it was the order of the mounding type (11.29%)> slope type (10.22%)> plain type (4.42%). Noise reduction rate, all of the daytime, was the highest in the mounding type. As a result of the factors on the amount of reduction of noise, More physical structure is mounding type, green structure is the stratification of green space, and the number of individuals is large, the higher the tree planting density, it is determined that the noise reduction effect is high. Also, factors affecting the noise reduction effect of the day and night were different.