• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.609-614
• /
• 2011

The ship working environment of combat service support boat is much inferior to the ground working environment. For this reason, the crew of a combat service support boat suffer from an occupational disease such as hardness of hearing. Owing to its small size and low status, the improvement of its working and residential environment was occasionally ignored and its indoor noise was not fully investigated. In this study, for improving its residential environment indoor, the indoor noise of its shipboard compartments was analysed. These studies define the indoor noise level of combat service support boat is very high and some of indoor noise is exceeded the criteria for ship noise. Compared with marine police vessels, the indoor noise levels of marine police vessels are higher than the level of combat service support boat.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.772-778
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2%. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45Hz~3.34Hz and damping ratio revealed for 1.26~2.84%. Maximum verticality deflection(4.86mm) was sufficiently satisfied the design criteria(30.1mm), but in the case of verticality acceleration's respond, design criteria BRDM(Bridge Design Manual) & CTRL presentation derive rail limit value 0.35g be more than value 6 time recorded, maximum was measured 0.49g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.731-740
• /
• 2014

Occupants induced floor vertical vibrations may cause other occupant's annoyance and lead to social loss. To help control such floor vibrations, several criteria have been developed mostly based on human perception tests and floor vibration tests. Floor vibration is evaluated by comparison with criteria and vibration parameters of subject floor, such as frequency, damping ratio, acceleration value, vibration duration time and occurrence frequency. Three acceleration value parameters are used in criteria; peak acceleration, rms acceleration and VDV, when a floor vibration serviceability is evaluated. Meanwhile rms acceleration and peak acceleration are adopted as vibration limit value in criteria and researches of human perception for vibration. Occupants induced floor vibration is transient rather than steady state. However, rms acceleration is not reliable parameter for evaluating transient vibration. The objective of this study is to investigate the characters of human perception level according to acceleration value parameters for vibration induced by heel impacts and walking activities.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.683-690
• /
• 2008

반복적인 신뢰 전파 알고리듬을 low-density parity-check(LDPC) 부호에 적용하는 경우 패리티-검사를 이용한 기존 복호 중단 기법은 높은 signal-to-noise ratio(SNR) 영역에서 반복 복호 수를 줄이는 것을 가능케 한다. 그러나 재전송 요청이 빈번한 Hybrid-ARQ(H-ARQ) 시스템에서는 낮은 SNR 영역에 적합한 복호 중단 기법이 없기 때문에 복호에 실패하는 경우 많은 양의 불필요한 반복 복호가 수행된다. 본 논문에서는 결국 복호에 실패하게 될 LDPC 부호 블록들을 복호 초기 단계에서 발견하기 위하여 신뢰 전파 복호에서 임시 부호어의 신드롬 무게를 이용한 중단 기법을 제안한다. 제안된 기법은 H-ARQ 시스템을 위한 LDPC 복호기에서 구현 복잡도의 증가와 성능의 열화 없이도 연산량을 70-80% 감소시킨다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.821-826
• /
• 2011

A basic concept for selection criteria of measuring places of RVI CVAP is to determine measuring places and sensors based on the results of the hydraulic and structural analysis for RVI CVAP in APR1400. In addition, there is the important selection criteria to determine measuring places for measurement of RVI CVAP ; the first is to choose measuring places according to U.S. NRC R.G. 1.20, the second is to select measuring places by RVI design review, the third is to option on the basis of measurement results of SYSTEM 80, the forth is to decide using review results on a design change of a reactor and the last is to determine using the review on the possibility of installation/removal of sensors and structures for the measurement. We developed selection criteria of measuring places for RVI CVAP in APR1400 and this will be directly applied to the measurement program for RVI CVAP.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1306-1314
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2 %. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45 Hz~3.34 Hz and damping ratio revealed for 1.26~2.84 %. Maximum verticality deflection(4.86 mm) was sufficiently satisfied the design criteria(30.1 mm), but in the case of verticality acceleration's respond, design criteria BRDM(bridge design manual) & CTRL presentation derive rail limit value 0.35 g be more than value 6 time recorded, maximum was measured 0.49 g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• 한국조경학회지
• /
• 제32권2호
• /
• pp.25-35
• /
• 2004

The purpose of the study is to analyze the existing situation of the green buffer zone in the large scale industrial site and other major residential apartment areas. In this study, it is specifically intended that the planning guideline be upgraded to adopt future landuse trends and thus to suggest design criteria for management of the buffer zone. The framework of the analysis is to review the current landuse, noise reduction, ecological implications and landscape in general. Although the major function of a green buffer zone is considered to protect the residential area from various hazards of industrial, traffic, and visual environment, the situation is that most of the zones are maintained at a minimum level of services by local government. The study carried out intensively almost every type of case studied throughout the country, which implies that the management of the green buffer zone should be expanded physically enough to function for its original objectives. The study recommends that ecological management of the green buffer zone be emphasized and therefore the criteria for this purpose as well as noise issue should be developed prior to the landuse aspects. The study suggests specific guidelines for planning and design for the green buffer zone development. This study should be verified positively through the sustainable monitoring and requires nationwide and overall examination so that it may be applied to whole green spaces.

• 한국조명전기설비학회지:조명전기설비
• /
• 제13권2호
• /
• pp.156-156
• /
• 1999

This paper describes the characteristics and the criteria of electrical environmental effects produced from power system especially transmission line. Audible noise radio and TV interference, electric and magnetic inductions which are main items for optimal conductor selection as well as major contributors to the community complaint of electrical environmental problem, are surveyed and studied comparing with the criteria or the environmental protection regulation of domestic and foreign countries. As a result a domestic criteria of electrical environmental on power system was suggested.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.652-653
• /
• 2014

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.654-655
• /
• 2010