• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.15-20
• /
• 2003

For some applications such as teleconference or telecommunication systems using a distant-talking hands-free microphone, the near-end speech signals to be transmitted is disturbed by an ambient noise and by an echo which is due to the coupling between the microphone and the loudspeaker. Furthermore, the environmental noise including channel distortion or additive noise is assumed to affect the original input speech. In the present paper, a new approach using echo canceller and maximum a posteriori(MAP) estimation is introduced to improve the accuracy of hands-free speech recognition. In this approach, it was shown that the proposed system was effective for hands-free speech recognition in ambient noise environment including echo. The experimental results also showed that the combination system between echo canceller and MAP environmental adaptation technique were well adapted to echo and noise environment.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.345-351
• /
• 2004

This Paper describes a nonlinear adaptive noise filter using neural network for digital controller system. Back-Propagation Learning Algorithm based MLP (Multi Layer Perceptron)is used an adaptive filters. In this paper. it assume that the noise of primary input in the adaptive noise canceller is not the same characteristic as that of the reference input. Experimental reaults show that the neural network base noise canceller outperforms the linear noise canceller. Especially to make noise cancel close to realtime, Primary input is divided by unit and each divided part is processed for very short time than all the processed data are unified to whole data.

• MALSORI
• /
• no.62
• /
• pp.85-96
• /
• 2007

In this paper, we carried out recognition experiments for noisy speech having various levels of car noise and output of an audio system using the speech interface. The speech interface consists of three parts: pre-processing, acoustic echo canceller, post-processing. First, a high pass filter is employed as a pre-processing part to remove some engine noises. Then, an echo canceller implemented by using an FIR-type filter with an NLMS adaptive algorithm is used to remove the music or speech coming from the audio system in a car. As a last part, the MMSE-STSA based speech enhancement method is applied to the out of the echo canceller to remove the residual noise further. For recognition experiments, we generated test signals by adding music to the car noisy speech from Aurora 2 database. The HTK-based continuous HMM system is constructed for a recognition system. Experimental results show that the proposed speech interface is very promising for robust speech recognition in a noisy car environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.413-420
• /
• 2011

This paper proposes a new adaptive algorithm to cancel the acoustic feedback and noise signals in the binaural hearing aids. The convergence performances of the proposed algorithm are improved by updating coefficients of the feedback canceller after the speech signal is cancelled from the residual signal with dual microphones. The feedback canceller firstly cancels the feedback signal from the microphone signal, and then the noise canceller reduces the noise by the beamforming method. To assure that binaural hearing aids converge stably, the left-sided hearing aid only is converged firstly, next the right-sided hearing aid only is converged. To verify performances of the proposed algorithm, simulations were carried out for a speech. As the results of simulations, it was proved that we can advance 14.43dB SFR(Signal to Feedback Ratio) on the average for the feedback canceller, 10.19dB SNR(Signal to Noise Ratio) improvement on the average for the noise canceller, in case that this algorithm is used.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1004-1016
• /
• 2007

In this paper we proposed a Weight-Update-Control Adaptive Noise Canceller which improves speech when environmental noise is stationary and it is hard to acquire a reference signal. Adaptive Noise Canceller(ANC) needs a reference signal, but it is not easy to measure pure noise without voice for reference in factory. Because there are mixed various mechanical noise and workers' voice. Therefore ANC is not suitable to reduce background noise. So we proposed the method that uses an arbitrary constant as an input signal and inputs microphone signal to the reference signal. The noise is eliminated using updated weights in non-speech range. In speech range the weight is fixed and the modified voice is acquired then voice is restored through transversal filter. The proposed method is based on facts that the factory noise is stationary and the noise is not changed in short conversation range. As a result of simulation using MATLAB, we confirmed that the proposed method is effective for reducing factory noise and has high signal to noise ratio(SNR).

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.482-489
• /
• 2009

This paper proposes a CW(Continuous-Wave) bio-radar applying a new adaptive noise canceller based on ALE(Adaptive Line Enhancer) which can remove the Gaussian noise and system noise. Recently the research works on this CW bio-radar which can be used to detect heartbeat and respiration are advanced by the university and research facility. Although the researches describe CW bio-radar not only is vulnerable for the Gaussian noise but also has a disadvantage of decreasing the heart-rate accuracy due to the noise, the researches do not demonstrate the effective method for removing the noise component in a baseband signal. In this paper, a CW bio-radar applying the new adaptive noise canceller based on ALE which can remove the noise component is proposed. This paper compares and analyzes the performance for increasing the heart-rate accuracy according to removing the Gaussian noise and system noise in the baseband signal through the quadrature receiver which can alleviate the demodulation sensitivity to target position.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1249-1256
• /
• 2019

In this paper, we propose a new algorithm to remove acoustic feedback and noise in hearing aids. Instead of using the conventional FIR structure, this algorithm is a deep learning algorithm using neural network adaptive prediction filter to improve the feedback and noise reduction performance. The feedback canceller first removes the feedback signal from the microphone signal and then removes the noise using the Wiener filter technique. Noise elimination is to estimate the speech from the speech signal containing noise using the linear prediction model according to the periodicity of the speech signal. In order to ensure stable convergence of two adaptive systems in a loop, coefficient updates of the feedback canceller and noise canceller are separated and converged using the residual error signal generated after the cancellation. In order to verify the performance of the feedback and noise canceller proposed in this study, a simulation program was written and simulated. Experimental results show that the proposed deep learning algorithm improves the signal to feedback ratio(: SFR) of about 10 dB in the feedback canceller and the signal to noise ratio enhancement(: SNRE) of about 3 dB in the noise canceller than the conventional FIR structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2362-2367
• /
• 2005

This paper reports a technique for discriminating double talk and echo path change using the stochastic characteristics of power change for an adaptive noise canceller. The causes of rapid error increasing are double talk and echo path change. When the echo path is changed, the system corrects the impulse response in order to reduce the error. However, in the case of double talk, the system has to suspend the updating impulse response in order to maintain the quality of the voice signal. In the conventional system, it was difficult to discriminate between the two situations. In this research, the stochastic characteristics of the voice power change in the double talk period were experimentally verified to be different from the power change during echo path changing. Based on the results, a new double talk detection method is proposed.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.357-358
• /
• 2006

We propose the robust PBFLMS in noises, which is the enhanced acoustic echo canceller using ACPBF-LMS(Alternative Constrained Partitioned Block Frequency domain Least Mean Square) algorithm. The defect of the block structure filtering is the deterioration of convergence efficiency from noise and interference. To improve the performance of convergence efficiency, noise effect should be reduced. The new method of reducing noise effect is proposed, which apply the estimated background noise to adaptive filter step size. By experiments, the proposed acoustic echo canceller has TCL of 50dB, and always provides faster convergence speed and lower complexity than the full-tap NLMS. We also carried out an implementation of PBFLMS using ARM9EJ-S.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.911-916
• /
• 2010

This paper proposes a new algorithm to cancel the acoustic feedback and noise signals in digital hearing aids. The proposed algorithm combines the feedback canceller to remove acoustic feedback signals and the noise canceller to reduce background noises. The feedback canceller is implemented by normal adaptive FIR filter, and the noise canceller is implemented by using the Wiener solution in frequency domain. This noise canceller has the transfer function presented by the power spectral density of signals. To verify the performances of the proposed algorithm, the simulations were carried out for the system. As the results of simulations, it was proved that we can advance 10.85dB output SNR on the average for the forward path gain of 0dB, and 11.04dB output SNR on the average for the forward path gain of 6dB, in the case of using the proposed algorithm.