• Journal of Korean Electronics
• /
• v.3 no.8
• /
• pp.83-89
• /
• 1983

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1054-1062
• /
• 1991

In this paper a communication system using direct sequence spread spectrum (DS/SS) technique is constructed to transmit burst format data over power line channel with impulsive noise and narrowband interferences. Fast code synchronization is acquired by digital matched filter and data decision is accomplished by sampling pulses. In order to examine the performance of the power line communication system, but error rate and packet loss rate are measured over the simulation channel with various noise sources. When the packet composed of 1-bit preamble and 63-bit data is transmitted under very high burst impulsive noise, the bit error rate is about 10$^3$-10$^4$ and the packet loss rate is below 0.07.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.187-198
• /
• 2004

In this paper, we analyze the performance of BPM (Bi-Phase Modulation) UWB (Ultra Wide Band) multiple access system using PN (Pseudo Noise) code based time hopping sequence in indoor wireless channels. In particular, we compare BPM UWB multiple access system with PPM (Pulse Position Modulation) UWB multiple access system in terms of signalling and demodulation schemes. Moreover, we analytically evaluate the performance of these UWB systems by deriving the bit error rate expressions under the assumption that pulse energy and data transmission rate are identical for both systems. Simulation results in additive white Gaussian noise and realistic indoor multipath wireless channels show that the performance of BPM scheme is approximately 1 dB better than that of PPM scheme. However, the performance discrepancy becomes negligible as the number of users increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.291-301
• /
• 2009

In this paper, the effect of ISI(Inter-Symbol Interference) and ICI(Inter-Carrier Interference) due to time difference of arrival on OFDMA-based mobile multi-hop relay (MMR) systems is analyzed. Analyses are performed for the ISI caused by the previous OFDMA symbol transmitted from neighboring macro or relay cell as well as the ISI caused by the next OFDMA symbol transmitted from neighboring macro or relay cell. Then, an effective SINR(Signal to Interference plus Noise Ratio) estimation method and a path selection method considering time difference of arrival are proposed to minimize the effect of ISI and ICI. It is shown by simulation that the performance degradation caused by time difference of arrival can be significantly mitigated when the proposed path selection method is applied to the uplink of OFDMA-based MMR systems.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.41-43
• /
• 2017

본 논문에서는 IoS (Internet of Signage) 환경에서 실감형 데이터 전송을 위한 상황 인지 기반 적응형 전송기법을 적용하고 이를 분석한다. 사이니지 네트워크 환경에서는 임의적인 다중 경로 페이딩, 간섭 등과 같은 왜곡 요소가 존재할 수 있기 때문에 이를 대처하기 위해 무선 송신기에서는 채널 환경에 대한 인지 이후, 그에 따른 MCS (Modulation and Coding Scheme)를 선정 및 안테나 기법을 선정한다. MCS 및 안테나 기법 선정을 위해 무선 송신기에서는 사전에 알고 있는 통계적인 SNR (Signal-to-Noise Ratio) 값을 통해 문턱값을 계산하고, 수신 사이니지로부터 얻은 CSI (Channel State Information)와의 크기 비교를 한다. 시뮬레이션 결과에서는 상황 인지를 기반으로 매 순간 최적의 전송률을 달성할 수 있음을 볼 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.64-67
• /
• 1999

We have been implemented 10 Gb/s-320 km of dispersion-shifted fiber (DSF) transmission. The optical link consists of a 10 Gb/s optical transceiver, an optical booster amplifier, 3 sets of optical in-line amplifiers, an optical preamplifier and transmission fibers. Firstly, we investigated the Q-factor characteristics in terms of optical signal to noise ratio (OSNR) of 320 km of DSF, measured receiver sensitivity is -27 dBm and power penalty is 2 dB, respectively. We concluded that optical SNR degradation and path penalty gives rise to 1 dB penalty, respectively.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.1-9
• /
• 2003

In this paper, we combine AMC (Adaptive Modulation and Coding) with MIMO (Multiple Input Multiple Output) multiplexing to improve the throughput performance of AMC in Next Generation Communication Mobile Systems. In addition, we propose a system that adopts STD (Selection Transmit Diversity) in the combined system. The received SNR (Signal to Noise Ratio) is improved by adopting STD techniques and an improved SNR increases a probability of selecting MCS (Modulation and Coding Scheme) level that supports higher data rate. The computer simulation is performed in flat Rayleigh fading channel. The results show that higher throughput is achieved by AMC-TD schemes. AMC-STTD scheme shows about 250kbps increase in throughput. And AMC-STD with 2 transmit antennas achieves about 420 kbps throughput improvement over the conventional AMC at 9dB SNR.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.70-78
• /
• 2009

This paper addresses the analysis and the design optimization of differential interconnects for high-speed Low-Voltage Differential Signaling (LVDS) applications. Thanks to the differential transmission and the low voltage swing, LVDS offers high data rates and improved noise immunity with significantly reduced power consumption in data communications, high-resolution display, and flat panel display. We present an improved model and new equations to reduce impedance mismatch and signal degradation in cascaded interconnects using optimization of interconnect design parameters such as trace width, trace height and trace space in differential printed circuit board (FPCB) transmission lines. We have carried out frequency-domain full-wave electromagnetic simulations, and time-domain transient simulations to evaluate the high-frequency characteristics of the differential FPCB interconnects. We believe that the proposed approach is very helpful to optimize high-speed differential FPCB interconnects for LVDS applications.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.749-756
• /
• 2006

Broadcast nature of wireless medium and path-loss reduction create a favourable condition for collaborative communications (CC) among single-antenna users to gain the powerful benefits of multi-antenna system without the demand for physical arrays. This paper proposes a CC strategy adapting to the propagation environment changes by optimizing the transmit signal amplification factors to simplify the structure of maximum likelihood (ML) detector and to obtain the minimum error probability as well. The closed-form BER expression was also derived and compared to the simulation results to evaluate the performance of the suggested solution. A variety of numerical results revealed the cooperation significantly outperforms non-cooperative counterpart under flat Rayleigh fading channel plus AWGN (Additive White Gaussian Noise).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.49-57
• /
• 2012

An image reconstruction algorithm is proposed to estimate transmitted original images from images displayed on a video terminal. The proposed algorithm acquires images that are displayed on video terminal screens by using a camera. The transmitted images are then estimated with the acquired images. However, camera-acquired images exhibit geometric and color distortions caused by characteristics of the camera and display devices. We make use of a geometric distortion correction algorithm that exploits homography and color distortions using a weighted-linear model. The experimental results show that the proposed algorithm yields promising estimation performance with respect to the peak signal-to-noise ratio (PSNR). PSNR values of the estimated images with respect to the corresponding original images range from 28-29 dB.