• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9B
• /
• pp.563-568
• /
• 2007

This paper proposes a routing establishment method for improving path stability in mobile ad-hoc networks. In mobile ad-hoc networks, the network topology is highly dynamic due to the node mobility unlike wired networks. Since the existing methods are based on the shortest path algorithm with the minimum hop count regardless of the path stability, it could lead to packet loss and path disconnection in mobile ad-hoc networks. In particular, if control packets and critical data are transmitted on the unstable path, it causes serious problems. Therefore, this paper proposes one approach in order to minimize packet loss and path disconnection by considering the node mobility. After the destination node receives multiple RREQ messages, it selects the stable path through the proposed MinMax algorithm according to the node speed.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.623-624
• /
• 2008

Overlay Multicast Routing Algorithm operates flexibly according to the various limited condition and environment of the MANET. Because of this Algorithm have maintenance and transmission of the network to use virtual Overlay ID. This paper proposes the method to give node ID considering attribute of node. If it uses ID considering attribute of node, it will improve routing speed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.616-625
• /
• 2011

Ensuring the designed prestress force is very important for the safety of prestressed concrete bridge. The loss of prestress force in tendon could significantly reduce load carrying capacity of the structure. In this study, an automated prestress-loss monitoring system for prestressed concrete girder using PZT-interface and wireless impedance sensor node is presented. The following approaches are carried out to achieve the objective. Firstly, wireless impedance sensor nodes are designed for automated impedance-based monitoring technique. The sensor node is mounted on the high-performance Imote2 sensor platform to fulfill high operating speed, low power requirement and large storage memory. Secondly, a smart PZT-interface designed for monitoring prestress force is described. A linear regression model is established to predict prestress-loss. Finally, a system of the PZT-interface interacted with the wireless sensor node is evaluated from a lab-scale tendon-anchorage connection of a prestressed concrete girder.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.278-285
• /
• 2011

This paper makes an analysis of the encoding structure and the decoding algorithm proposed by the DVB-S2 specification. The methods of implementing the LDPC decoder are fully serial decoder, the partially parallel decoder and the fully parallel decoder. The partial parallel scheme is the efficient selection to achieve appropriate trade-offs between hardware complexity and decoding speed. Therefore, this paper proposed an efficient memory structure for check node update block, bit node update block, and LLR memory.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.219-223
• /
• 2003

A lot of researches have been done on supporting QoS in the mobile networks and ad hoc network architectures, but most of them are not suitable in the static ad hoc environment. Most Research in mobile ad hoc networks has been devoted to routing protocol since they are fundamantal to the technology for improving QoS. In mobile ad hoc networks, QoS means not only fast speed and reliable transmission but reliable node. Needless to say, general QoS is serious question. In this paper, we enunciate the proposition to reduce network load and prevent node expire using buffer node.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.618-636
• /
• 1997

DQDB(Distributed Queue Dual Bus) protocol, the IEEE 802.6 standard protocol for metropolitan area networks, does not fully take advantage of the capabilities of dual bus architecture. Although fairness in bandwidth distribution among nodes is improved when using so called the bandwidth balancing mechanism, the protocol requires a considerable amount of time to adjust to changes in the network load. Additionally, the bandwidth balancing mechanism leaves a portion of the available bandwidth unused. In a high-speed backbone network, each node may act as a bridge/ router which connects several LANs as well as hosts. However, Because the existence of high speed LANs becomes commonplace, the congestionmay occur on a node because of the limitation on access rate to the backbone network and on available buffer spaces. to release the congestion, it is desirable to install some congestion control algorithm in the node. In this paper, we propose an efficient congestion control mechanism and fair and waster-free MAC protocol for dual bus network. In this protocol, all the buffers in the network can be shared in such a way that the transmission rate of each node can be set proportional to its load. In other words, a heavily loaded node obtains a larger bandwidth to send the sements so tht the congestion can be avoided while the uncongested nodes slow down their transmission rate and store the incoming segments into thier buffers. this implies that the buffers on the network can be shared dynamically. Simulation results show that the proposed probotol significantly reduces the segment queueing delay of a heavily loaded node and segment loss rate when compared with original DQDB. And it enables an attractive high throughput in the backbone network. Because in the proposed protocol, each node does not send a requet by the segment but send a request one time in the meaning of having segments, the frequency of sending requests is very low in the proposed protocol. so the proposed protocol signigificantly reduces the segment queuing dely. and In the proposed protocol, each node uses bandwidth in proportion to its load. so In case of limitation of available buffer spaces, the proposed protocol reduces segment loss rate of a heavily loaded node. Bandwidth balancing DQDB requires the wastage of bandwidth to be fair bandwidth allocation. But the proposed DQDB MAC protocol enables fair bandwidth without wasting bandwidth by using bandwidth one after another among active nodes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.11-17
• /
• 2008

This paper proposes the USN node location recognition method with low power, which is the modified centroid method. The conventional Zigbee node location recognition is used to the three RSSI values from three beacons, respectively. When a person move with node, the moving speed of USN node doesn't fast. Therefore, one among three positions used to the value that it is a previous value. This method doesn't large the error in terms of the exact position. Using hand-off method, we get about 30% power advantage than the conventional centroid method. And Our monitoring system add the function that it is possible to search for the node region by color.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.229-235
• /
• 2017

Until now, a study on a ubiquitous sensor network has been mainly concentrated in the areas of sensor nodes, and as a results, technologies related with sensor node were greatly developed. Despite of many achievements on research and development for a sensor node, a ubiquitous sensor network may failed to establish the actual service environment because variety of restrictions. In order to provide a actual service using a ubiquitous sensor networks applied to many results on research and development for a sensor nodes, a study on a wired/wireless composite router must be carried out. However a study on a wired/wireless composite router is relatively very slow compared with the sensor node. In this study, developed a high-performance router platform supporting IPv6 that can provide high-speed wired/wireless interface and QoS, and it can provide the multimedia service Interlocking the wireless sensor network and the Internet network. To analysis a given network environment and to develop the appropriate hardware and software in accordance with this requirement.

• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.9-17
• /
• 2001

Ad-Hoc networks consist of a set of mobile hosts that communicate using wireless links, without the use of other communicate support facilities (such as base stations). The topology of an Ad-Hoc network changes due to the movement of mobile host. which may lead to sudden packet loss. Recently, a large amount of research has focused on the routing protocols needed in such an environment. but researches about Internet traffic performance analysis were unexhausted. Accordingly, we have simulated Ad-Hoc mobile network that using AODV routing protocol and Ad-Hoc mobile network topology size and node speed as simulation estimation-factor to analysis traffic performance. As the result of the simulation, we identify that TCP /Reno was more sensitive than TCP/Sack about node speed and a number of the node.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.27-35
• /
• 2015

In this paper, we suggested a RS485 based CSMA/CD protocol that is available in low speed multi-node networks such as industry control communication network and home network etc. The suggested protocol was compared to widely used Master-Slave protocol, Modbus. We modeled realistic control network and showed that the average delay and throughput performance were significantly improved in the different transmission rates.