• 대한두경부종양학회지
• /
• 제21권1호
• /
• pp.26-31
• /
• 2005

Backgrounds and Objectives: Squamous cell carcinomas of the oral cavity(SCOC) in TNM stage I & II have relatively high chance to be cured compared to those in the advanced stage, but sometimes result in the treatment failure with poor prognosis. There have been few reports on the patterns of failure and the clinical courses for SCOC in stage I & II after the failure of initial treatment. This study is directed at identifying the clinical outcomes of stage I & II SCOC and the salvage rate after initial treatment and suggesting an optimal level of treatment by analyzing the patterns of failure. Material and Methods: The medical records of 36 patients with SCOC, initially diagnosed between 1995 and 2001 as TNM stage I & II were reviewed retrospectively. The patterns of failure, salvage treatment, clinical courses, and the survival of these subjects were analyzed. The minimum follow-up period of no-evidence of disease(NED) was 12 months with an average of 32.2 months. Results: Overall rate of the treatment failure in SCOC of stage I & II was 41. 7%(15/36 cases). Most of the treatment failure in the subjects with stage I tumors occurred in regional lymph node. Local failure was the most frequent form of failure in the subjects with stage II tumors after wide excision of primary tumor with elective neck dissection and/or radiation therapy. No significant correlation was noted between the safety margin and the local failure. Elective neck dissections in stage I & II SCOC had a tendency to reduce regional failure (p=0.055). The salvage rates at 24 months were 85.7% in stage I, and 37.5% in stage II. The 3-year survival rate after the failure of initial treatment was 55.0%. Conclusion: SCOC of stage I & II after the failure of initial treatment showed poor prognosis despite of the salvage treatments. This study implies that the elective neck dissections for regional lymph node should be required for SCOC of stage I & II to reduce the treatment failure.

• 한국콘텐츠학회논문지
• /
• 제10권4호
• /
• pp.55-65
• /
• 2010

낮은 이동성을 갖는 무선 애드혹 네트워크에서, 에너지 고갈에 따른 링크 단절 없이 네트워크 생존시간을 오랫동안 유지할 수 있는 방안을 제시한다. 일반적으로 에너지 잔량이 많이 남아 있는 노드는 트래픽 부하가 적은 노드이다. 따라서 노드의 에너지 잔량을 기준으로 경로를 결정하는 수정 AODV 라우팅 프로토콜을 제안한다. 한편, 기존 AODV에서는 경로 설정을 위해 엄청난 개수의 제어 패킷을 네트워크에 방송함으로써 전체 노드의 에너지 소비가 급격히 늘어난다. 이러한 제어 패킷을 효과적으로 줄이기 위해 발신지 노드는 대체 경로 정보를 자신의 경로 테이블에 저장하도록 하였다. 링크 단절이 발생했을 때, 경로 재설정을 시도하기 전에 발신지 노드는 경로 테이블에 저장된 대체 경로 중에서 해당 경로의 에너지 잔량 총합이 가장 큰 경로를 선택한다. 이렇게 함으로써 불필요한 AODV 제어 패킷 발생 가능성을 줄일 수 있다. 본 논문에서 제안한 방식을 기존 AODV, MMBCR 방식 등과 비교했을 때 네트워크 생존 시간이 최대 40% 증대됨을 알 수 있다.

• Journal of Information Processing Systems
• /
• 제12권1호
• /
• pp.57-72
• /
• 2016

To provide effective communication in the wireless mesh network (WMN), several algorithms have been proposed. Since the possibilities of numerous failures always exist during communication, resiliency has been proven to be an important aspect for WMN to recover from these failures. In general, resiliency is the diligence of the reliability and availability in network. Several types of resiliency based routing algorithms have been proposed (i.e., Resilient Multicast, ROMER, etc.). Resilient Multicast establishes a two-node disjoint path and ROMER uses a credit-based approach to provide resiliency in the network. However, these proposed approaches have some disadvantages in terms of network throughput and network congestion. Previously, the buffer based routing (BBR) approach has been proposed to overcome these disadvantages. We proved earlier that BBR is more efficient in regards to w.r.t throughput, network performance, and reliability. In this paper, we consider the node/link failure issues and analogous performance of BBR. For these items we have proposed a resilient packet transmission (RPT) algorithm as a remedy for BBR during these types of failures. We also share the comparative performance analysis of previous approaches as compared to our proposed approach. Network throughput, network congestion, and resiliency against node/link failure are particular performance metrics that are examined over different sized WMNs.

• 디지털콘텐츠학회 논문지
• /
• 제6권1호
• /
• pp.7-12
• /
• 2005

논문은 IEEE 표준인 SCI(Scalable Coherent Interface)에 근거한 degree 2의 ICR(Interleaved Cyclic Ring) 네트워크의 신뢰도를 연구하였고 대표적인 링 네트워크들과 비교하였다. ICR 네트워크의 신뢰도 연구에 있어서 두 노드가 동시에 통신 할 수 있는 신뢰도를 계산하였다. ICR 네트워크의 신뢰도 연구에서 실패율(failure rate)의 변화에 신뢰도의 반응을 연구하였고 적은 노드에 대하여 정확한 신뢰도를 구하고 노드 수가 증가한 경우에는 최대 최소 경계를 계산하여 평균치 일반식을 구하였다. ICR 네트워크의 사이클의 변화에 따라 ICR 네트워크의 신뢰도를 다른 링 네트워크와 비교하였다.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.69-81
• /
• 2013

Maintaining connectivity is essential in multi-hop wireless networks since the network topology cannot be pre-determined due to mobility and environmental effects. To maintain the connectivity, a critical point in the network topology should be identified where the critical point is the link or node that partitions the network when it fails. In this paper, we propose a new critical point identification algorithm and also present numerical results that compare the critical points of the network and H-hop sub-network illustrating how effectively sub-network information can detect the network-wide critical points. Then, we propose two localized topological control resilient schemes that can be applied to both global and local H-hop sub-network critical points to improve the network connectivity and the network resilience. Numerical studies to evaluate the proposed schemes under node and link failure network conditions show that our proposed resilient schemes increase the probability of the network being connected in variety of link and node failure conditions.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.17-21
• /
• 2002

A finite element method based on the two-dimensional progressive failure analysis is presented for characterizing the strength and failure of the unidirectional-fabric hybrid laminated composite joints under pin loading. The 8-node laminated shell element is incorporated in the updated Lagrangian formulation. Various failure criteria including the maximum stress, Tsai-Wu, Yamada-Sun, and combinations of them are used in conjunction with the complete unloading stiffness degradation method. For the verification, joint tests are conducted for the specimens with various geometries. Although there are some differences depending on the geometry, the finite element model using the Yamada-Sun or the combined Yamada-Sun and Tsai-Wu criterion predicts the failure strength best.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.79-82
• /
• 2002

A finite element method based on the two-dimensional progressive failure analysis considering material nonlinearity is presented for characterizing the strength and failure of the unidirectional-fabric hybrid laminated composite joints under pin loading. The 8-node laminated shell element is incorporated in the updated Lagrangian formulation. Failure criteria including the Maximum Stress and Tsai-Wu are used in conjunction with the complete unloading stiffness degradation method. For the verification, joint tests are conducted for the specimens with two different ply-number ratios of UD composite to fabric composite. Although there are some differences depending on ply-number ratios, the finite element model using the maximum stress criterion considering nonlinear material behavior predicts the failure strength best.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.475-484
• /
• 1999

압력절점은 요소의 균등한 압력증분을 1개의 자유도로 갖는 절점이며, 유한요소의 하중-변위 평형방정식에 체적과 압력의 관계를 추가하여 한계압력 이후에서도 체적변화에 따른 압력증분을 직접적으로 제저할 수 있는 절점이다. 본 연구에서는 철근콘크리트의 평면 구성 방정식과 적층정식화에 적용한 쉘 요소에 압력절점을 추가하고 해석시 체적을 제어함으로써 철근콘크리트 원통형 구조에 대해 파괴까지의 극한내압 능력을 해석할 수 있는 체적제어 비선형 해석기법을 개발하였다. 본 논문에서 제안한 해석기법을 이용하여 철근콘크리트 원통형 구조물에 대하여 비선형 해석을 수행하여 한계압력과 한계압력 이후의 구조물의 거동을 예측하였으며 실험결과와 비교 검증하였다.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.23-26
• /
• 2018

Optical-layer restoration has been demonstrated with a wavelength-blocker (WB) -based reconfigurable optical add/drop multiplexer (ROADM). Two $2{\times}2$ optical switches with a control circuit were placed before and after a WB-based ROADM to provide automatic path restoration under fiber-failure conditions. Using the proposed node configuration, a 3-node self-healing ring (SHR) network has been implemented to demonstrate the feasibility of the automatic optical-layer restoration. From the results, the restoration time was measured to be ~4 ms under fiber-failure conditions, without any additional power penalty in receiver sensitivity.

• 한국통신학회논문지
• /
• 제29권10B호
• /
• pp.841-848
• /
• 2004

네트워크 상에 장애가 발생 시에는 서비스들의 Qos 요구사항을 만족시킬 수 있는 또 다른 백업 경로를 사용하여 서비스해야 한다. 따라서 본 논문에서는 IP 네트워크 상에 발생된 단일 회선 장애를 위해 simple PFC(5-PFC) 기법과 다중 회선 장애를 위한 iterative PFC(i-PFC) 그리고 라우터와 같은 노드 장애를 복구하기 위한 fault_node Avoidance PFC(a-PFC) 기법들을 제안하고 이를 기반으로 Direct_destination Rerouting(DR) 기법을 최소 재라우팅 비용 문제를 통해 성능 비교 분석하기로 한다.