• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.347-352
• /
• 1998

An analytical method for evaluating the free vibration of two circular plates coupled with water was developed by assuming the clamped boundary condition of the plates and an ideal fluid. The method was applied to analyze the transverse vibration modes, in-phase and out-of-phase, and the results were compared to those obtained by the finite element method (FEM) using a commercial ANSYS 5.2 software. It was found that the theoretical results can predict well the coupled natural frequencies for all in-phase modes with good accuracy. However, the analytical method shows some discrepancies compared with FEM analysis in predicting the coupled natural frequency of the out-of-phase modes, except when m = 0, the zero nodal circle. The analytical method also applied to evaluate the characteristics of the natural frequency with respect to the major parametric variation in mode numbers and distance between the circular plates.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2415-2421
• /
• 2020

The axial heterogeneous void distribution in a fuel channel is a relevant and important issue during nuclear reactor analysis for LWR, especially for boiling water channel-type reactors. Variation of the coolant density in fuel channel has an effect on the neutron spectrum that will in turn have an impact on the values of absolute reactivity, the void reactivity coefficient, and the fuel isotopic compositions during irradiation. This effect is referring to as the history effect in light water reactor calculations. As the void reactivity effect is positive in RBMK type reactors, the underestimation of water density heterogeneity in 3D reactor core numerical calculations could cause an uncertainty during assessment of safe operation of nuclear reactor. Thus, this issue is analysed with different cross-section libraries which were generated with WIMS8 code at different reference water densities. The libraries were applied in single fuel model of the nodal code of QUABOX-CUBBOX/HYCA. The thermohydraulic part of HYCA allowed to simulate axial water distribution along fuel assembly model and to estimate water density history effect for RBMK type fuel.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.777-787
• /
• 2014

Stormwater pipe systems are most commonly used to discharge rainwater from the urban catchment covered by the impervious area. To design stormwater pipe and rainwater pumping station, frequency analysis is implemented using historical rainfall and the design rainfall is timely distributed using theoretical shape such as Huff distribution. This method cannot consider the rainfall intensity variation caused by climate change which is type of uncertainty. Therefore, in this study, runoff from Gasan1 stormwater pumping stations catchment is calculated using design rainfall distributed by the 2nd quartile distribution method and the historical rainfall events. From the analysis, the nodal flooding in the urban catchment is likely caused by the high peak rainfall event rather than the large amount of rainfall. The linear regression analysis is implemented. As a result, when several storms have the same amount of rainfall, the nodal flooding in the stormwater pipe systems could be caused by the high peak of storm events. Since as the storm duration become short, the peak rainfall become high, the nodal flooding likely become severe with the short storm duration. The uncertainty in the peak data of design rainfall is analyzed and this uncertainty has to be consider in the stormwater pipe design process.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.253-264
• /
• 2019

Storm surges caused by a typhoon occur during the summer season, when the sea-level is higher than the annual average due to steric effect. In this study, we analyzed the sea-level pressure and tidal data collected in 1 h intervals at Incheon, Kunsan, Mokpo, Seogwipo stations on the Yellow Sea coast to analyze the summer season storm surge and wave overtopping. According to our analyses, the summer mean sea-level rise on the west and south coasts is approximately 20 cm and 15 to 20 cm higher than the annual mean sea-level rise. Changes in sea-level rise are closely related to changes in seasonal sea-level pressure, within the range of 1.58 to 1.73 cm/hPa. These correlated mechanisms generates a phase difference of one month or more. The 18.6 year long period tidal constituents indicate that in 2090, the amplitude of the $M_2$ basin peaks on the southwest coast. Therefore, there is a need to analyze the target year for global warming and sea-level rise in 2090. Wave overtopping was simulated considering annual mean sea-level rise, summer sea level rise, the combined effect of nodal factor variation, and 100-year frequency storm surge. As a result, flooding by wave overtopping occurs in the area of Suyong Bay, Busan. In 2090, overtopping discharges are more than doubled than those in Marine City by the recent typhoon Chaba. Adequate coastal design is needed to prepare for flood vulnerability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.374-378
• /
• 1983

As one way of evaluating polymorphism in maize, variation of peroxidase 8 (Px.8) in maize plants was investigated by means of horizontal acrylomide electrophoresis. The specific part of maize plants was stele and other parts of plants were also studied for 34 different maize lines and hybrids. The results obtained indicate that Px.8 has three distinct migrating patterns on gel such as fast, slow and fast-slow. The band pattern varied with materials used. Most hybrids were showing fast-slow band, indicating that those hybrids are heterozygous at least for Px.8 allele. Variation of band pattern was obseerved within a single inbred line. The Px.8 in stele tissue and in young leaf and nodal tissue was found to be identical, indicating the possible use of those tissues as an alternative tissue for Px.8 study. It was also found that there might be some definite relationship between Px.8 and Px.3 activities in the same tissue.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.459-464
• /
• 2001

Leaf disks from cultivar 'Kennebec' and one selection line (ND 860-2) were cultured on Murashige-Skoog medium with various combinations of indole acetic acid (IAA) and zeatin riboside. Shoots, roots and callus were induced at various combinations of plant growth regulator levels. The medium containing $3.5mg{\cdot}L^{-1}$ IAA and $4.0mg{\cdot}L^{-1}$ zeatin riboside produced the most plantlets. Rooted regenerants were grown in the greenhouse. The growth of regenerated plants obtained from the MS medium supplemented with $7.0mg{\cdot}L^{-1}$ IAA and $3.0mg{\cdot}L^{-1}$ zeatin riboside was significantly greater than those grown from nodal expalnts. In ND 860-2, a leaf chimera with chlorophyll deficient (light yellow) sectors was found in plants regenerated fiom leaf disks (grown on MS medium supplemented with $3.5mg{\cdot}L^{-1}$ IAA and $3.0mg{\cdot}L^{-1}$ zeatin riboside) but not in plants grown from nodal explants. The phenotypic variability was also observed in the tuber number, size and weight.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.39-47
• /
• 2008

The 1,874 rice lines were selected from 3,000 Ds insertional mutant pool by Basta herbicide treatment and were surveyed for trait variation and molecular characteristics of genes knocked out by Ds insertion. Compared with "Donjin", an original japonica cultivar used for transformation, Ds insertion mutant pool showed large variation in major agronomic traits including tiller, panicle, and heading etc. Southern blot analysis demonstrated that these lines on the average had two Ds copies in Donjin genome, resulting in 38.4% of one copy, 32.5% of two copies, 16.7% of three copies, and 11.3% of over four copies. GUS analysis showed that 3.9% of lines (73/1,860) had tissue-specific expression in leaves, nodal parts, floral organs such as stigma and pollen, and roots. Data set obtained from agricultural trait variation and molecular characteristics for individual Ds insertional lines would provide researchers with more information for understanding the function of unknown rice genes controlling economically important traits.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.147-158
• /
• 2004

For stiffened plates composed of composite materials, many researchers have used a finite element method which connected isoparametric plate elements and beam elements. However, the finite element method is difficult to reflect local behavior of stiffener because beam elements are transferred stiffness for nodal point of plate elements, especially the application is limited in case of laminated composite structures. In this paper, for analysis of laminated composite stiffened plates, 3D shell elements for stiffener and plate are employed. Reissner-Mindlin's first order shear deformation theory is considered in this study. But when thickness will be thin, isoparamatric plate bending element based on the theory of Reissner-Mindlin is generated by transverse shear locking. To eliminate the shear locking and virtual zero energy mode, the substitute shear strain field is used. A deflection distribution is investigated for simple supported rectangular and skew stiffened laminated composite plates with arbitrary orientation stiffener as not only variation of slenderness and aspect ratio of the plate but also variation of skew angle of skew stiffened plates.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.492-497
• /
• 2004

Three methods for design sensitivity such as numerical differentiation, analytical method and semi-analytical method have been developed for the last three decades. Although analytical design sensitivity analysis is exact, it is hard to implement for practical design problems. Therefore, numerical method such as finite difference method is widely used to simply obtain the design sensitivity in most cases. The numerical differentiation is sufficiently accurate and reliable for most linear problems. However, it turns out that the numerical differentiation is inefficient and inaccurate because its computational cost depends on the number of design variables and large numerical errors can be included especially in nonlinear design sensitivity analysis. Thus semi-analytical method is more suitable for complicated design problems. Moreover semi-analytical method is easy to be performed in design procedure, which can be coupled with an analysis solver such as commercial finite element package. In this paper, implementation procedure for the semi-analytical design sensitivity analysis outside of the commercial finite element package is studied and computational technique is proposed, which evaluates the pseudo-load for design sensitivity analysis easily by using the design variation of corresponding internal nodal forces. Errors in semi-analytical design sensitivity analysis are examined and numerical examples are illustrated to confirm the reduction of numerical error considerably.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.5
• /
• pp.278-281
• /
• 2006

The effect of plant growth regulators was investigated on in vitro shoot proliferation from axillary bud explants of Hypericum erectum. To determine the optimal cytokinin for proliferation of axillay buds, we carried out screening four cytokinins (BA, kinetin, 2iP, TDZ). When nodal segments were cultured on MS medium supplemented with $4.5\;{\mu}M$ TDZ (thidiazuron), a number of shoots were induced. Our results indicated that the addition of TDZ to culture medium resulted in the induction of significantly more axillary buds than in the addition of other cytokinins. The optimal concentration of TDZ for proliferation of axillary buds was $10\;{\mu}M$. 92% of shoots spontaneously rooted without any plant growth regulator (PGR) and formed whole plantlets within one month. More than 95% of these regenerants survived and they did not show any detectable variation in morphology or growth characteristics compared to their donor plants.