• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.57-57
• /
• 2009

반도체 device가 고집적화 및 다층화 되어짐에 따라 현재 사용되고 있는 구리 interconnect의 확산방지막인 Ta/TaN은 많은 문제가 발생하고 있다. 고집적화 된 반도체 소자에 적용시키기에는 Ta/TaN 확산 방지막의 고유 저항값이 매우 크고, 구리의 증착에 필요한 seed layer의 크기도 문제화 된다고 보고되어지고 있다. 이러한 이유로 인해 점차 고집적화 되어지는 반도체 기술에 맞추어 새로운 확산 방지막에 대한 연구가 현재 활발히 이루어지고 있다. 이에 새로운 확산 방지막으로써 대두되고 연구되고 있는 재료가 Ruthenium (Ru)이다. Ru은 공기 중에서 매우 안정하고 고유저항 값 또한 $13\;{\mu}{\Omega}\;cm$의 Ta에 비해 $7.1\;{\mu}{\Omega}\;cm$의 매우 작은 고유저항 특성을 가지고 있다. 또한, Ru은 구리와의 우수한 접착성으로 인해 구리의 interconnect의 형성에 있어 seed layer가 필요하지 않을 뿐만 아니라 높은 annealing 온도에서도 무시할 만큼 작은 solid solubility를 가지며 구리와의 계면에서 새로운 화합물을 형성하지 않으며 annealing시 구리의 delamination을 유발시키지도 않는다. 이에 따라, 평탄화와 소자 분리를 위하여 chemical mechanical planarization (CMP) 공정이 필요하게 되었다. 하지만, Ru의 noble한 성질과 Ru 확산방지막 CMP공정 시 노출되는 다른 이종 물질 사이의 최적화 된 selectivity를 구현하는데 많은 어려움이 있다. 이로인해 Ru 확산 방지막을 위한 CMP slurry에 대한 연구는 아직 미흡한 수준이다. 본 연구에서는 Ru이 확산방지막으로 사용되었을 때 이를 위한 CMP slurry에 대한 평가와 연구가 이루어졌다. Slurry 조성과 농도 및 pH에 따른 전기 화학적 분석을 통하여 slurry 내에서 각각의 막질들이 어떠한 상태로 존재하는지 분석해 보았다. 또한, Ru을 비롯한 이종막질들의 etch rate, removal rate와 selectivity에 대한 연구가 진행되었다. 최종적으로 Ru 확산방지막 CMP를 위한 최적화된 slurry를 제안하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.117-117
• /
• 2008

In MIM capacitor, poly-Si bottom electrode is replaced with metal bottom electrode. Noble metals can be used as bottom electrodes of capacitors because they have high work function and remain conductive in highly oxidizing conditions. In addition, they are chemically very stable. Among novel metals, Ru (ruthenium) has been suggested as an alternative bottom electrode due to its excellent electrical performance, including a low leakage of current and compatibility to high dielectric constant materials. Chemical mechanical planarization (CMP) process has been suggested to planarize and isolate the bottom electrode. Even though there is a great need for development of Ru CMP slurry, few studies have been carried out due to noble properties of Ru against chemicals. In the organic chemistry literature, periodate ion ($IO_4^-$) is a well-known oxidant. It has been reported that sodium periodate ($NaIO_4$) can form $RuO_4$ from hydrated ruthenic oxide ($RuO_2{\cdot}nH_2O$). $NaIO_4$ exist as various species in an aqueous solution as a function of pH. Also, the removal mechanism of Ru depends on solution of pH. In this research, the static etch rate, passivation film thickness and wettability were measured as a function of slurry pH. The electrochemical analysis was investigated as a function of pH. To evaluate the effect of pH on polishing behavior, removal rate was investigated as a function of pH by using patterned and unpatterned wafers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.224-226
• /
• 2004

CMP process requirements become tighter especially in sub-100nm technology. Especially, high planarity and low defectivity appear as leading issues in CMP technology. Also, the introduction of new materials and advanced lithography technique increases CMP applications. Here are listed some major issues and challenges in CMP technology, which can be categorized following four items. These have practical significance and should be considered more concretely for future generation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.803-809
• /
• 2005

Cerium ammonium nitrate (CAN) and nitric acid was used an etchant and an additive for Ru etching and polishing. pH and Eh values of the CAN and nitric acid added chemical solution satisfied the Ru etching condition. The etch rate increased linearly as the concentration of CAN increased. Nitric acid added solution had the high etch rate. But micro roughness of etched surfaces was not changed before and after etching, The removal rate of Ru film was the highest in $1wt\%$ abrasive added slurry, and not increased despite the concentration of alumina abrasive increased to $5wt\%$. Even Ru film was polished by only CAN solution due to the friction. The highest removal rate of 120nm/min was obtained in 1 M nitric acid and $1wt\%$ alumina abrasive particles added slurry. The lowest micro roughness value was observed in this slurry after polishing. From the XPS analysis of etched Ru surface, oxide layer was founded on the etched Ru surface. Therefore, Ru was polished by chemical etching of CAN solution and oxide layer abrasion by abrasive particles. From the result of removal rate without abrasive particle, the etching of CAN solution is more dominant to the Ru CMP.