• The Korean Journal of Ecology
• /
• 제11권1호
• /
• pp.29-36
• /
• 1988

This present study has been carried out to examine the correlation between the distribution of the coliform bacterial plasmids and the viability test against heavy metals in the upper stream of Han river(Gapyung; clean water) and the its basin (Anyang Cheon; polluted water). And the distribution of plasmids were examined to be used as trophic indicator for analysis between the clean and polluted waters. 1. A total of 110 isolates were analyzed for the presence of plasmids by means of the boiling method and agarose gel techniques. Plasmids were significantly more frequent in the strains which had been isolated from the clean water (14.3%). Also, there were much higher multiplicity of plasmids at the polluted water(41.0%), compared with the clean water (33.0%). By the comparision between molecular weight of bacterial plasmids in the clean water and those of polluted water, there were no significant differences of the clean water from the polluted water, to such extent as 30.0%, 28.6%, respectively, in frequency for occurrence of high molecular weight plasmids iver 35.8% Mdal. 2. Each isolate was carried out the resistance test for mercury(10-5M), nickel(10-3M) and arsenic (0.1%). At the polluted site, the survival ability of the plasmid-carrying straings(Hg, 31.0%l Ni, 5.7%; As, 65.7%) was higher than that of the non plasmid-carrying strains(Hg, 12.1%; Ni, 3.0%; As, 54.6%). This trend was more remarkable in the clean site (plasmid-carrying strains: 16.7%,-,-). As a result it is suggested that plasmids could be used as an indicator of a certain types of water pollution. In addition, heavy metals might have inflyenced, some extent, to the distribution of plasmids in the environment which has been surveyed in the present study.

• Korean Chemical Engineering Research
• /
• 제62권3호
• /
• pp.225-232
• /
• 2024

탄소 중립 사회로의 전환을 위해 전체 온실가스 배출량의 86.8%를 차지하는 에너지 생산 부문에서의 이산화탄소 배출량 감축이 필요하다. 현재 우리나라는 총 발전량의 60%를 석탄과 천연가스에 의존하고 있으며 이를 풍력, 태양광 등의 재생에너지로 대체하는 방법은 에너지 수급이 불안정하고 비용이 높다는 단점이 있다. 이를 해결하기 위해 본 연구에서는 기존에 사용되고 있는 NGCC(Natural Gas Combined Cycle) 공정을 기반으로 천연가스, 암모니아, 수소를 혼합하여 연소한다는 해결책을 제시하였다. 시뮬레이션을 수행한 결과, 이산화탄소 배출량을 효과적으로 줄일 수 있었으며 천연가스만을 연료로 이용해 얻은 전력량과 비교하였을 때 34%~238%의 전력을 얻었다. 천연가스, 암모니아, 수소의 질량분율에 대한 사례연구를 수행한 결과, 암모니아 비율이 증가할수록 발전량과 NO_x 배출량은 감소하였고 수소비율이 증가할수록 발전량과 NO_x 배출량은 증가하였다. 본 연구는 추후 다양한 혼합 연료의 조합 및 경제성 평가 등 혼합 연료 발전 분야의 가이드라인이 될 수 있을 것이다.

• 한국농공학회논문집
• /
• 제51권5호
• /
• pp.101-106
• /
• 2009

The previous study developed the Filter-Disinfection-Adsorption (FDA) system to provide clean irrigation water for greenhouse cultivation as well as convenience water to farmers. In this study, the field examination was undertaken to assess performance of the FDA system. The field application was made in the suburb of Daegu, one of the large city in Korea. The study area located near by down-stream of Gum-Ho river is suffering low irrigation water quality problems with no water supply service facilities. Four water quality parameters including Suspended Solid (SS), Biological Oxygen Demand (BOD), coliform, and turbidity were selected to test the purification performance of FDA system. Also in order to improve the system, this study investigated the defects of using the FDA system through field monitoring. As results, it was found that this system can be used to supply good quality of irrigation water for greenhouse cultivation and also provide convenience water to farmers in the field areas of no water supply services.

• 한국농공학회논문집
• /
• 제51권5호
• /
• pp.95-100
• /
• 2009

The water purification systems have been hardly used for agricultural purpose due to their complicated compositions and high costs for farmers, while only simple filtrations have been applied to irrigation systems in order to prevent the system from clogging problems. This study therefore developed a clean water supplying system, the Filter-Disinfection-Adsorption (FDA) system, especially for greenhouse cultivation of where low quality of water is available. This system has also been produced for providing convenience water to farmers in the areas of no water supply service systems for the purpose of washing their bodies or agricultural machineries after farm work. The FDA system consists of three stages of purification processes with an integral module, including disk and teflon filtrations and Ultraviolet (UV) sterilization processes. Indoor experiments were undertaken with a trial product of the FDA system to test its performance. The operation test of the process was performed as well as the condition check of each item including UV module, filters, control panel, pump, valves, etc. The results shows good performance of each test with no critical problems. The initial and maintenance costs were also analysed with other purification systems. From the comparisons, the FDA system found to be very economical and easy to use.

• 한국생활과학회지
• /
• 제6권2호
• /
• pp.121-131
• /
• 1997

This study was to design the clean room garment which fits for a body and adjusts well to the action. We examined the body's changes in action through a body measurment and made a sample of the clean room garment to which had adapted the body's changes in action and evaluated the function and the appearance compared with the existing the clean room garment. The followings were summery of the results : 1. Back intersyce breadth decreased, trunk length increased and the other parts were not change. At a posture of raising hands($M_3$) in comparison with an upright posture($M_0$). Back intersyce breadth, hip length and knee length increased and the other parts were a little change. At a bowing posture($M_2$) in comparison with an upright posture($M_0$). Back hip girth, knee length, hip length and leg length increased and the other parts were not change. At a working posture on a chair($M_1$) in comparison with an upright posture($M_0$). 2. The overall clean room garment was made increasing on the changes of part of a body through measuring and body measurement. 3. From the test of the function, it became known that the devised clean room garment was superior to the existing one in the parts of neck, shoulder, armpit and elbow at a working posture on a chair($M_1$), in the parts of neck, shoulder, and armpit at a bowing posture($M_2$), and the armpit at a posture of raising hands($M_3$). The appearance was better on the whole. 4. From the examination of photographs, the waist line of the devised clean room garment was not so much pulled up as that of the existing one on moving. And when sitting down on a chair, the waist line of the existing one was pulled down while that of the devised one had no change. As above, we investigated the actual conditions of wearing the clean room garment and measured the body's changes according the various actions. So we applied these results to the devised clean room garment but we couldn't research the clean mom effect of it owing to not obtaining the measuring instrument. The aspect of ergonomics liked the feeling of wearing and fitted to the action must be given consideration to the clean room garment, and simultaneously the dust-resistant effect must be taken into consideration in order to improve the quality of the goods. Therefore, we think it should be continued the research on the dust-resistant effect, material, washing method, quality control, and size along with the aspect of ergonomics.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1335-1341
• /
• 2011

Conserving clean air and removing contaminants and particular matters accumulated in the ventilation system of the subway stations are key issue for green railway environment. There is no national guideline or industrial regulations to sustain clean duct and ventilation system, which requires rapid reformation of cleaning procedure and system. In fact, accumulated various particular matters and dusts can occur secondary air contamination and become a primary health harm factor for subway passengers. This study investigates various duct cleaning technologies and trends. In additon, effective cleaning method with an automated robot device is proposed. In particular, current dust cleaning technologies and duct cleaning robots are analyzed based on their functions and feasibilities. The proposed design of automated device is expected to save the operating cost of subway HVAC system and sustain clean air environment.

• 한국대기환경학회지
• /
• 제26권5호
• /
• pp.469-474
• /
• 2010

Gasoline engines have proven their utility in light, medium and heavy duty vehicles. Concern about long term availability of petroleum and the environment norms by the increased vehicular emission have mandated the search for safe fuel. CNG is an environmentally clean alternative to the existing spark ignition engines with the advantages of minimum change. A higher octane number and a higher self ignition temperature make it an attractive gaseous fuel. The thermal efficiency is better than gasoline for the same engine. The reduced carbon mono oxide, carbon di-oxide, hydrocarbon emissions is a favorable outcome along with a slight increase in $NO_x$ emission when compared with gasoline fuel to a dual fuel mode in the existing spark ignition engines. The result from the experiment shows that CNG could be a potential substitute fuel that maintains performance and emissions characteristics in gasoline engines.

• 청정기술
• /
• 제13권2호
• /
• pp.115-121
• /
• 2007

본 연구에서는 유전체 장벽 방전-광촉매 복합 공정에 의한 NO 및 $SO_2$ 제거를 실험적으로 분석하였다. 유전체 장벽 방전을 위해 유전체로서 유리구가 사용되었고 $TiO_2$ 광촉매 입자는 딥코팅(dip-coating) 방법에 의해 높은 비표면적을 가지는 스펀지 형태로 유리구에 코팅되었다. 플라즈마 반응기에 인가된 전압이나 펄스 주파수, 혹은 기체의 체류시간이 증가함에 따라, NO 및 $SO_2$의 제거효율은 증가하였다. NO 및 $SO_2$ 공급농도 증가하면 NO 및 $SO_2$ 제거에 더 많은 에너지가 요구되어 NO 및$SO_2$의 제거효율이 감소하였다. 본 연구의 실험 결과들은 NO 와 $SO_2$를 제거하기 위한 유전체 장벽 방전-광촉매 복합 공정 설계의 기초 자료로 사용될 수 있다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제27권5호
• /
• pp.45-54
• /
• 2021

최근 노이즈 제거를 위한 심층 학습 모델에 대한 연구가 활발하게 진행되고 있다. 특히 블라인드 노이즈 제거 (blind denoising) 기술이 발전하면서 깨끗한 영상을 얻기가 불가능한 영상의 영역에서 노이즈 영상만으로 심층 학습 기반 노이즈 제거 모델의 학습이 가능해졌다. 우리는 관찰된 노이즈 영상으로부터 깨끗한 영상을 얻기 위해 더는 깨끗한 영상과 노이즈 영상의 짝을 이루는 데이터를 필요하지 않는다. 하지만 노이즈 영상과 깨끗한 영상 간의 차이가 큰 데이터라면 노이즈 영상만으로 학습된 노이즈 제거 모델은 우리가 원하는 품질의 깨끗한 영상을 복원하기 어려울 것이다. 이 문제를 해결하기 위해서 짝지어지지 않는 깨끗한 영상과 노이즈 영상으로 학습한 모델 기반 노이즈 제거 기술은 최근 연구되고 있다. 가장 최신 기술인 ISCL은 깨끗한 영상과 노이즈 영상의 쌍을 기반으로 한 지도학습 기반 모델의 성능과 거의 근접한 성능을 보여 주었다. 우리는 제안된 방법이 ISCL을 포함한 다른 최신 짝을 이루지 않는 영상 기반 노이즈 제거 기술보다 성능이 우수함을 보여준다.

• 한국대기환경학회지
• /
• 제25권5호
• /
• pp.410-419
• /
• 2009

Generally, air pollutant emission at workplace is estimated by two methods: indirect methods using emission factors and direct methods based on CEMS (Continuous Emission Monitoring System). CAPSS (Clean Air Policy Support System) is a representative indirect method and the national air pollutant database of Korea. However, characteristics of some workplaces may create a gap between CAPSS and CEMS data. For improving of emission data accuracy, emission data of CEMS (named CleanSYS) equipped at 138 target workplaces were compared with those of CAPSS. As a result, $SO_x$ and $PM_{10}$ emission levels obtained by CAPSS were lower than those of CleanSYS. $SO_x$ and $PM_{10}$emission ratios were 61.5% and 71.2% lower respectively, showing the biggest gaps. On the other hand, $NO_x$ emission of CAPSS was higher by 10.4%. $SO_x$ showed the biggest difference in 'Energy industry combustion' and $NO_x$ did in 'Production Process' within the SCC category. $PM_{10}$ presented a large gap in 'Manufacturing industry combustion.' The differences in $SO_x$ between the two systems occurred because some large-size facilities lack pollution controllers or efficient pollution controllers. Based on this study, CAPSS emission database of Korea will improve accuracy through adopting CEMS emission system, which enables more efficient national atmospheric policies and workplace management.