• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.385-385
• /
• 2010

Copper oxide thin films were deposited on the p-type Si(100) by r.f. magnetron sputtering as a function of different oxygen concentration. The deposited copper oxide thin films were investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), spectroscopic ellipsometry (SE), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The SEM and SE data show that the thickness of the copper oxide films was in the range of 100-400 nm. AFM images show that the surface morphology was depended on the oxygen ratio. The crystal structure of copper oxide films was changed from metallic copper to copper oxide with increasing oxygen concentration. The oxidation states of Cu 2p and O 1s resulted from XPS were consistent with XRD results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.81-84
• /
• 2005

We suggest flux quantum-based mechanism for force realization in the sub-pico-Newton range. By controlling the number of flux quantum in a superconducting ring, a force can be created as an integer multiple of a constant force step. For a 50 nm-thick Nb ring with the inner and outer radii of $5{\mu}m\;and\;10{\mu}m$, respectively, the force step is estimated to be 165 fN, assuming the magnetic field gradient of 10 T/m. We also estimated a maximum force limit to be $1\sim2$ pN.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.233-233
• /
• 2012

위상절연체(Bi2Te3)와의 격자상수 불일치 비율이 서로 다른 Si (111)와 Ge (111) 기판을 선택하여 Bi3Te3 박막의 성장 조건을 찾고 이에 따른 특성 분석을 수행하였다. 시료 제작은 초고진공 분위기에서 MBE를 이용하였고, AFM, XRD와 XPS로 각각 구조적 변화, 결정 상태 및 화학적 상태를 분석하였다. 우선 Si 위에 형성된 Bi2Te3의 경우, 초기 박막이 형성된 후, 증착 시간이 증가함에 따라 섬(island)모양의 구조물들이 step edge 부분에 분포되는 모습을 AFM 이미지에서 확인하였다. 형성된 박막의 스텝 단차는 약 1 nm 또는 이 값의 정수 배였고, 이것은 Bi2Te3 unit cell의 quintuple layer (QL) 값과 일치하였다. 또한 측정된 XRD pattern으로 Bi2Te3가 hexagonal 구조의 c-축에 따라 결정성이 이루어졌음을 확인할 수 있었다. XPS 스펙트럼에서는 Bi 4f가 높은 에너지 방향으로 2.3 eV, Te 3d는 낮은 에너지 방향으로 약 0.7 eV 만큼 구속 에너지의 화학적 이동이 나타남을 알 수 있었다. 이러한 결과는 Si 위에 Bi2Te3 박막이 높은 결정성을 가지고 형성되었다는 것을 의미한다. 또한 Si (111) 기판보다 Bi2Te3 결정과 격자상수 불일치의 비율이 상대적으로 작은 Ge (111)을 기판으로 하여 Bi2Te3 박막을 성장시켜 두 표면에서의 박막 성장의 특성을 비교, 논의할 것이다.

• Journal of ILASS-Korea
• /
• v.2 no.4
• /
• pp.7-14
• /
• 1997

Laser Raman scattering method has been applied to measure equivalence ratio of methane/air mixture in injected spray. We used high power KrF excimer laser$(\lambda=248nm)$ and a high gain ICCD camera to capture low intensity signal. Raman shifts and Raman scattering cross -sections of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4\;and\;C_3H_8$ are measured precisely. Our results show an excellent agreement with those of other groups. Mole fraction measurement of $O_2\;and\;N_2$ from air shows that $O_2:N_2=0.206:0.794$. We used gas injector which was operated at 1 bar. Methane is used as a fuel. Spray region is $10mm\times37mm$ and this region is divided into 80 points. In Raman signals are obtained and ensemble averaged for each point. 3-d and contour plot of distribution of equuivalence ratio is presented. Our measured results show that the equivalence ratio of methane/air mixture in methane-rich region is reasonable. However, more study is necessary for methane-lean region because background noise level is almost same as Raman intensity of methane.

• Journal of Sensor Science and Technology
• /
• v.13 no.3
• /
• pp.252-257
• /
• 2004

$Y_{2}O_{3}:Eu^{3+}$ thin films have been grown on $Al_{2}O_{3}$(0001) substrates by a pulsed laser deposition (PLD) method. The phosphor thin films were deposited at a substrate temperature of 500, 600, and $700^{\circ}C$ under the oxygen pressure of 100, 200, and 300 mTorr. The crystallinity, surface roughness and photoluminescence of the films are highly dependent on the substrate temperature and oxygen pressure. The films grown on $Al_{2}O_{3}$(0001) substrate even under the different substrate temperatures and oxygen pressures exhibited (222) preferred orientation. The luminescent spectra exhibited strong luminescence of ${^{5}D_{0}}-{^{7}F_{2}}$ transition within $Eu^{+3}$ peaking at 612 nm. The crystallinity and luminescence intensity of the films have been improved as the substrate temperature increasing. With increase of oxygen pressure from 50 to 300 mTorr, the crystallinity of the films has been uniformly decreased. The photoluminescence intensity and surface roughness have similar behaviors as a function of oxygen pressure. At 200 mTorr, both photoluminescence intensity and surface roughness show a maximum.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.2
• /
• pp.226-236
• /
• 2020

Antibiotic resistance by pathogenic bacteria and fungi is one of the most serious global public health problems in the 21^st century, directly affecting human health and lifestyle. Pseudomonas aeruginosa and Staphylococcus aureus with strong resistance to the common antibiotics have been isolated from Intensive Care Unit patients at Zagazig Hospital. Thus, in this study we assessed the biocidal activity of nanoparticles of silver, copper and zinc synthesized by Fusarium solani KJ 623702 against these multidrug resistant-bacteria. The synthesized Metal Nano-particles (MNPs) were characterized by UV-Vis spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and Zeta potential. The Fourier transform infrared spectroscopy (FTIR) result showed the presence of different functional groups such as carboxyl, amino and thiol, ester and peptide bonds in addition to glycosidic bonds that might stabilize the dispersity of MNPs from aggregation. The antimicrobial potential of MNPs by F. solani against the multidrug-resistant (MDR) P. aeruginosa and S. aureus in addition to the mycotoxigenic Aspergillus awamori, A. fumigatus and F. oxysporum was investigated, based on the visual growth by diameter of inhibition zone. Among the synthesized MNPs, the spherical AgNPs (13.70 nm) displayed significant effect against P. aeruginosa (Zone of Inhibition 22.4 mm and Minimum Inhibitory Concentration 21.33 ㎍/ml), while ZINC oxide Nano-Particles were the most effective against F. oxysporum (ZOI, 18.5 mm and MIC 24.7 ㎍/ml). Transmission Electron Microscope micrographs of AgNP-treated P. aeruginosa showed cracks and pits in the cell wall, with internalization of NPs. Production of pyocyanin pigment was significantly inhibited by AgNPs in a concentration-dependent manner, and at 5-20 ㎍ of AgNPs/ml, the pigment production was reduced by about 15-100%, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.464-468
• /
• 2012

Three solvent systems, chlorobenzene (ink 1), chlorobenzene/o-dichlorobenzene (ink 2) and chlorobenzene/tetrahydronaphthalene (ink 3), were compared as printable inks for the fabrication of polymer light-emitting diodes (PLEDs) using poly[2-methoxy-5-(2-ethylhexyl-oxyl)-1,4-phenylenevinylene (MEH-PPV) as an emissive material and an inkjet printer (Fujifilm Dimatix DMP-2831). Ink 1 clogged the printer's nozzle and gave non-uniform film. Inks 2 and 3 were used to fabricate PLEDs with ITO/PEDOT:PSS/MEH-PPV/LiF/Al configurations. The best performance (turn-on voltage, 3.5 V; luminance efficiency, 0.17 cd/A; luminance, 1,800 cd/m) was obtained when ink 3 was used to form the emissive layer (thickness, 49 nm), attributable to the better morphology and suitable thickness of the MEH-PPV layer.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.171-172
• /
• 2008

$(Ba_{0.57}Sr_{0.33}Ca_{0.10})TiO_3$ (BSCT) thick films doped with 0.1 mol% $MnCO_3$ and $Yb_2O_3$ ($0.1{\sim}0.7$ mol%) were fabricated by the screen printing method on the alumina substrate. And the structural and electrical properties as a function of $Yb_2O_3$ amount were investigated. The lattice constants of the BSCT thick film doped with 0.1 mol% is 0.3955 nm. The specimen doped with 0.7 mol% $Yb_2O_3$ showed dense and uniform grains with diameters of about 6.3 mm. The thickness of all BSCT thick films was approximately 60 mm. The Curie temperature of the BSCT specimen doped with 0.1 mol% $Yb_2O_3$ was $18^{\circ}C$, and the dielectric constantand dielectric loss at this temperature was 4637 and 4.2%, respectively. The BSCT specimen doped with 0.1 mol% $Yb_2O_3$ showed the maximum value of $349{\times}10^{-9}C/cm^2K$ at Curie temperature. The figure of merit $F_D$ for specific detectivity of the specimens doped with 0.1 mol% $Yb_2O_3$ showed the highest value of $10.9{\times}10^{-9}Ccm/J$.

• Journal of ILASS-Korea
• /
• v.3 no.4
• /
• pp.35-42
• /
• 1998

Laser Raman scattering method has been applied to measure equivalence ratio of methane/air and propane/air mixture in constant volume combustion chamber. We used high power KrF excimer laser$(\lambda=248nm)$ and a high gain ICCD camera to capture low intensity Raman signal. Raman shifts and Ram cross-sections of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4\;and\;C_3H_8$ were measured precisely. Our results showed an excellent agreement with other groups. Mole fraction measurement of $O_2\;and\;N_2$ from air showed that $O_2\;:\;N_2$ = 0.206 : 0.794. We used constant volume combustion chamber and gas injector which is operated at $5\sim10barg$. Methane and propane are used as a fuel. 50 Raman signal are obtained and ensemble averaged for measurement of equivalence ratio. Our measured results showed that the equivalence ratio of fuel/air mixture is reasonable at ${\pm}5%$ error range.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.2
• /
• pp.69-80
• /
• 1986

In order to analyse the color preference quantitatively, specially with reference to the subjects in the age of twenties, 100 subjects(M=50, F=50) that unconsidered other factors were adopted and responded to 4 items of the questionaire. The item no. 1 was to investigate the most prefered color on the white background, no. 2 was to most preferred stimulation -level of lightness in the same hues, no. 3 was to most prefered color on 5 different backgrounds -grey, blue, pink, yellow, and yellow green-, and no. 4 was same as no. 3 but with different color-arrangement Materials for item 1 and 3 were made with transparent acryl-boards(30cm$\times$30cm), on which 16 color chips arranged on circle, for item 4 on lattice, and for item 2 with 16 white boards(8cm$\times$21cm), on which 7 color chips of different lightness-level arranged. Reflectance(Y) and color coordinate(x, y) of all color chips measured with color difference meter were transfered into wavelength(nm), exitation purity(%), and Munsell's value. The results may be summarized as follows: 1) Most prefered color was bluish green with wave1ength about 500nm. As increasing of exitation purity of color, more prefered. 2) When there were 7 different levels of lightness in the same hues, the relationship between the number of preference and the stimulation was inverted U-shaped. 3) With changing the background -color, the prefered colors were contrasting when backgrounds were low or high intensity-stimulation and familiar colors when backgrounds were medium intensity.