• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.313-319
• /
• 2014

This study was performed to obtain high conversion efficiency of $NH_3$ and minimize generation of nitrogen oxides using metal-supported catalyst with Ag : Cu ratio. Through structural analysis of the prepared catalyst with Ag : Cu ratio ((10-x)Ag-xCu ($0{\leq}x{\leq}6$)), it was confirmed that the specific surface area was decrease with increasing metal content. A prepared catalysts showed Type II adsorption isotherms regardless of the ratio Ag : Cu of metal content, and crystalline phase of $Ag_2O$, CuO and $CuAl_2O$ was observed by XRD analysis. In the low temperature($150{\sim}200^{\circ}C$), a conversion efficiency of AC_10 recorded the highest(98%), whereas AC_5 (Ag : Cu = 5 : 5) also showed good conversion efficiency(93.8%). However, in the high temperature range, the amounts of by-products(NO, $NO_2$) formed with AC_5 was lower than that of AC_10. From these results, It is concluded that AC_5 is more environmentally and economically suitable.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.210.1-210.1
• /
• 2014

The hexagonal boron nitride (h-BN) sheet, a 2D material like graphene sheet, is comprised of boron and nitrogen atoms. Similar to graphene, h-BN sheet has attractive mechanical properties while it has a wide band gap unlike graphene. Recently, many experimental groups studied the growth of single BN layer by chemical vapor deposition (CVD) method on the copper substrate. To study the initial stage of h-BN growth on the copper surface, we have performed density functional theory calculations. We investigate several adsorption sites of a boron or nitride atom on the Cu surfaces. Then, by increasing the number of adsorbed B and N atoms, we study formation behaviors of the BN flakes on the surface. Several types of BN flakes atoms such as triangular, linear, and hexagonal shapes are considered on the copper surface. We find that the formation of the BN flake in triangular shape is most favorable on the surface. On the basis of the theoretical results, we discuss the growth mechanism of h-BN layer on the copper surfaces in terms of its shapes in the initial stage of growth.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 제15회 심포지움
• /
• pp.23-46
• /
• 2002

The cryogenic, pressure swing adsorption and membrane methods have been used to separate air into nitrogen and oxygen. The air separation membrane is made of the polymers, of which manufacturing process is complicate and it causes a little high production cost. Polymer membrane has temperature limit in usage and low durability even at moderate temperature. Therefore, inorganic membranes have been studied for years. As formation of unit alumino-silicate membrane, unit cells of membrane were made with a few coating methods. In this study the dipping of substrate into sols, application of vacuum to the opposite side of substrate with coating and rotating of the substrate in the sols were found as good coating memthods to make a uniform coating and to control the thickness of membrane. The membrane coats were examined by SEM and XRD. The sample ESZl-1 was compared with those of samples that prepared by another method. The present developed coating methods could be applied to the various types of zeolite membrane formation, that is A- X-, Y- ZSM- and MCM-types of membranes. Also these membrane forming methods could be applied to formation of catalyst absorbed zeolite membrane, of which zeolite absorb the catalytic metals. The product obtained from these coating methods could be applied to the industrial gas and liquid phase catalytic reaction and separation processes.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.373-379
• /
• 2009

고정층 반응기에서 cesium carbonate 흡착제를 사용하여 이산화탄소($CO_2$), 질소 및 수분의 혼합기체로부터 $CO_2$를 수착하여 $CO_2$-cesium carbonate의 반응속도론을 구하기 위하여 $CO_2$의 파과곡선을 측정하였다. 비촉매 불균일반응계에서 반응속도론을 해석하기 위하여 $CO_2$의 파과곡선을 사용하여 비활성화 모델로부터 반응속도론을 구하고 $CO_2$의 파과곡선의 비선형해석으로부터 비활성화 모델에서 수착속도상수와 비활성속도상수를 구하였다.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.379-384
• /
• 2010

In the present work, bismuth nanopowders with various particle size distributions were synthesized by controlling argon (Ar) gas flow rate and chamber pressure of a gas condensation (GC) apparatus. From the analyses of transmission electron microscopy (TEM) images and nitrogen gas adsorption results, it was found that as Ar gas flow rate increased, the specific surface area of bismuth increased and the average particles size decreased. On the other hand, as the chamber pressure increased, the specific surface area of bismuth decreased and the average particles size increased. The optimum gas flow rate and chamber pressure for the maximized electrochemical active surface area were determined to be 8 L/min and 50 torr, respectively. The bismuth nanopowders synthesized at the above condition exhibit 13.47 $m^2g^{-1}$ of specific surface area and 45.6 nm of average particles diameter.

• 마이크로전자및패키징학회지
• /
• 제13권4호
• /
• pp.65-70
• /
• 2006

CVD 및 PECVD법으로 탄소 나노튜브를 성장하고, 그 후 $400{\sim}500^{\circ}C$에서 산화 열처리한 센서의 이산화질소 감지특성을 $200^{\circ}C$ 및 1.5ppm의 이산화질소 농도 하에서 측정하였다. 탄소 나노튜브 센서의 전기저항은 온도 증가에 따라 감소하는 반도체 특성을 보였으며, 이산화질소 흡착에 따라 전기저항은 감소하였다. 공기 중의 수분은 센서감도에 영향을 주고 있으며, 센서를 마이크로파에 3분간 노출하면 센서의 특성은 저하되었다. 또한 CVD법으로 제조한 시편에 비하여 PECVD법으로 성장한 탄소 나노튜브 센서의 감도는 향상 되었다.

• Macromolecular Research
• /
• 제13권6호
• /
• pp.521-528
• /
• 2005

Electrospun polyacrylonitrile (PAN) nanofibers were carbonized with or without iron (III) acetylacetonate to induce catalytic graphitization within the range of 900-1,500$^{circ}C$, resulting in ultrafine carbon fibers with a diameter of about 90-300 nm. Their structural properties and morphologies were investigated. The carbon nanofibers (CNF) prepared without a catalyst showed amorphous structures and very low surface areas of 22-31 $m^{2}$/g. The carbonization in the presence of the catalyst produced graphite nanofibers (GNF). The hydrogen storage capacities of these CNF and GNF materials were evaluated through the gravimetric method using magnetic suspension balance (MSB) at room temperature and 100 bar. The CNFs showed hydrogen storage capacities which increased in the range of 0.16-0.50 wt$\%$ with increasing carbonization temperature. The hydrogen storage capacities of the GNFs with low surface areas of 60-253 $m^{2}$/g were 0.14-1.01 wt$\%$. Micropore and mesopore, as calculated using the nitrogen gas adsorption-desorption isotherms, were not the effective pore for hydrogen storage.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.16-23
• /
• 2004

The silica containing carbon (C-SiO$_2$) membranes were fabricated using poly(imide siloxane) (PIS) having -CO- swivel group. The characteristics of porous C-SiO$_2$ structures prepared by the pyrolysis of poly(imide siloxane) were related with the micro-phase separation between the imide block and the siloxane block. Furthermore, the nitrogen adsorption isotherms of the CMS and the C-SiO$_2$ membranes were investigated to define the characteristics of porous structures. The C-SiO$_2$ membranes derived from PIS showed the type IV isotherm and possessed the hysteresis loop, which was associated with the mesoporous carbon structures, while the CMS membranes derived from PI showed the type I isotherm. For the molecular sieving probe, the C-SiO$_2$ membranes pyrolyzed at 550, 600, and 700$^{\circ}C$ showed the O$_2$ permeability of 924, 1076, and 367 Barrer (1 ${\times}$ 10$\^$-10/㎤(STP)cm/$\textrm{cm}^2$$.$s$.$cmHg) and O$_2$/N$_2$ selectivity of 9, 8, and 12.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.509-512
• /
• 2008

본 연구에서는 고온 수열 콘크리트의 세공구조 변화를 평가하기 위하여 질소 흡착법을 이용한 분석을 실시하였다. 아울러 역학적 특성 및 염화물 이온 확산계수의 변화도 측정하였으며, 고온 수열 후의 내구성 변화가 RC조의 수명에 미치는 영향을 예측하기 위해 2차원 유한요소 모델을 구축하였다. W/C에 따라 각 시험체의 가열온도가 증가할수록 약 0.01${\mu}m$ 이하의 미세 공극량은 감소하고, 약 $0.01{\mu}m{\sim}0.1{\mu}m$크기의 세공공극은 증가하였다. 역학적 특성은 탈수가 발생하는 $200{\sim}600^{\circ}C$에서는 급격하게 감소하였으며 염화물이온 확산계수는 반대로 급격히 증가하는 경향을 나타내었다. 수치해석을 통하여 가열(화재)에 의하여 콘크리트 속 철근 위치가 발청 한계 농도에 도달하는데 소요되는 시간이 단축되는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.504-509
• /
• 2013

In this study, ZnSe-$TiO_2$ composites were synthesized by a facile hydrothermal-assisted sol-gel process and characterized by nitrogen adsorption isotherms (77 K), X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM) and UV-vis diffuse reflectance spectrophotometry. The photocatalytic activity was investigated by decoloration methylene blue (MB), methyl orange (MO), and rhodamine B (Rh.B) in an aqueous solution under visible light irradiation. The results revealed that the photocatalytic activity of the ZnSe-$TiO_2$ photocatalyst was much higher than that of pure$TiO_2$. The ZnSe nanoparticles, which act as a photosensitizer, not only extend the spectral response of $TiO_2$ to the visible region but also reduce charge recombinations.