• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.838-846
• /
• 2016

Most of combustion processess used in industries require recovering or removing flue gas components. Recently a new MBA (moving bed adsorption) process for recovering $CO_2$ using zeolite 13X was developed. In this study, adsorption experiments for carbon dioxide, nitrogen, sulfur dioxide, and water vapor on zeolite 13X were carried out. Adsorption equilibrium and adsorption rate into solid particle were investigated. Langmuir, Toth, and Freundlich isotherm parameters were calculated from the experiment data at various temperatures. Experimental results were consistent with the theoretically predicted values. Also $CO_2$ adsorption amount was measured under the conditions with impurities such as $SO_2$ and $H_2O$. Binary adsorption data were well fitted to the extended Langmuir isotherm using parameters obtained from pure component experiment. However, $H_2O$ impurity less than, roughly, ${\sim}10^{-5}H_2O\;mol/g$ zeolite 13X enhanced slightly $CO_2$ adsorption. Spherical particle diffusion model well described experimentally measured adsorption rate. Diffusion coefficients and activation energies of $CO_2$, $SO_2$, $N_2$, $H_2O$ were obtained. Diffusion coefficients of $CO_2$ and $SO_2$ decreased with small amount of preadsorbed impurity. Parameter values from this study will be helpful to design of real commercial adsorption process.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.159-159
• /
• 2009

In this work, nitrogen and oxygen functionalities was introduced to the graphite nanofibers (GNFs) and their effect on electrocatalytic performance of the GNF supports for direct methanol fuel cells (DMFCs) was invesigated. The nitrogen and oxygen groups were introduced through the urea treatments and acid treatment, respectively. And, PtRu catalysts deposited on modified GNFs were prepared by a chemical reduction method. The catalysts were characterized by means of elemental analysis, nitrogen adsorption, and X-ray photoelectron spetroscopy (XPS). The structure and morphological characteristics of the catalysts were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). As a result, the Pt-Ru nanoparticles were impregnated on GNFs with good formation in 3-5 nm. And, the cyclic voltammograms for methanol oxidation revealed that the methanol oxidation peak varied depending on changes of surface functional groups. It was thus considered that the PtRu deposition was related to the reduction of PtRu and surface characteristics of the carbon supports. The changes of surface functional groups were related to PtRu reduction, significantly affect the methanol oxidation activity of anode electrocatalysts in DMFCs.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.3
• /
• pp.44-51
• /
• 2010

Contamination of groundwater from point and non-point sources is one of major problems of water resource manangement in Jeju island. This study characterized groundwater and soil contamination in Hallim area which is one of the areas of significantly contaminated soil and groundwater in Jeju Island. The amount of loaded contaminant (ALC) of Jeju area was estimated as 13,212 ton N/yr and 3,210 ton P/yr, The ALC of Hallim area was amounted to 2,895 ton N/yr and 1,102 ton P/yr, which accounted for 21.9% and 34.3% of the Jeju's ALC, respectively. The soil pH values (5.6-5.9) were not much different in land use areas. By contrat, average cation exchange capacity (CEC) of 14.1 $cmol^+/kg$ was high comparing to the nationwide range of 7.7-10.9 $cmol^+/kg$. Further, Sodium adsorption ratios (SARs) of horse ranch, pasture, and cultivating land for livestock were as high as 0.19, 0.17, and 0.16 respectively, comparing to the other landuse areas. Nitrate nitrogen at 22.2% of total groundwater wells exceeded 10 mg/L (the criteria of nitrate nitrogen for drinking water), averaginged 6.62 mg/L with maximum 28.95 mg/L. Groundwater types belonged to Mg-$HCO_3$, Na-$HCO_3$, Ca-$HCO_3$, and Na-Cl, among which Mg-$HCO_3$ type occupied more than 70% of the total samples, indicating the presence of anthropogenic sources. The concentration of nitrate nitrogen was negatively related to altitude and well depth, and positively related to the concentration of Ca, Mg, and $SO_4$ which might originate from chemical fertilizer. The ratio of nitrogen isotopes was estimated as an average of 8.10$^{\circ}/_{\circ\circ}$, and the maximum value of 17.9$^{\circ}/_{\circ\circ}$. According to the nitrogen isotope ratio, the most important nitrogen source was assessed as chemical fertilizer (52.6%) followed by sewage (26.3%) and livestock manures (21.1%).

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.191-200
• /
• 2011

A way to adsorptively remove indoor carbon dioxide at relatively lower concentration under ambient temperature was studied. A small lab-scale carbon dioxide adsorption and desorption reactors were prepared, and 5A and 13X zeolites were packed in this reactors to investigate their adsorption and desorption characteristics. The inflow carbon dioxide concentration was controlled to 5,000 ppm, relatively higher concentration found in indoor spaces with air quality problems, by diluting carbon dioxide with nitrogen gas. The flow rate was varied as 1~5 L/min, and the carbon dioxide concentration after this reactor was constantly monitored to examine the adsorption characteristics. It was found that 5A adsorbed more carbon dioxide than 13X. A lab-scale carbon dioxide desorption reactor was also prepared to investigate the desorption characteristics of zeolites, which is essential for the regeneration of used zeolites. The desorption temperature was varied as $25{\sim}200^{\circ}C$, and the desorption pressure was varied as 0.1~1.0 bar. Carbon dioxide desorbed better at higher temperature, and lower pressure. 5A could be regenerated more than three times by thermal desorption at $180^{\circ}C$. It is required to modify zeolites for higher adsorption and better regeneration performances.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.25-33
• /
• 2000

The new ion exchange resin was synthesized from chloromethylated styrene-1,4-divinylbenzene(DVB) with 1-aza-15-crown-5 macrocyclic ligand by substitution reaction. The effect of pH, time, dielectric constant of solvent and cross-linked of the matrix on the adsorption for $UO_2^{2+}$, $Ca^{2}$ and $Lu^{3+}$ was investigated. The metal ion was not adsorbed on the resins below pH 3 but above pH 4 fast adsorption behavior was showed. The optimum equilibrium time for adsorption of metallic ions was two hours. The adsorption selectivity determined in ethanol matrix was in increasing order $UO_2^{2+}>Ca^{2}>Lu^{3+}$. The adsorption power was in the order of 1%, 2%, 10% and 20% -crosslinked resin, but adsorption properties of resins decreased in proportion to the order of dielectric constant of solvents used. In addition, these metal ions could be separated in the column packed with 1% crosslinked resin by pH2.5 $HNO_3$ as an eluent.

• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.432-440
• /
• 1996

ZrO2 gel was prepared under pH 10 alkaline condition by sol-gel process and was investigated as a function of calcination temperature and effect of calcination temperature on cobalt adsorption capacity. The ZrO2 powder prepared by sol-gel process was calcined at 600, 800, 1000, 1200, 140$0^{\circ}C$ and analyzed by X-ray diffractometry. SEM specific surface area by BET nitrogen adsorption FT-IR and TG-DTA technique. It was shown that cobalt adsorption capacity of ZrO2 prepared under pH 10 alkaline condition and then calcined at $600^{\circ}C$ in high temperature was determined to be larger than that of ZrO2 at various calcination temperature. The specific surface area of ZrO2 calcined at $600^{\circ}C$ was 24.03m2/g and cobalt adsorption capacity at 25$0^{\circ}C$ high-temperature water was 0.16m-eq/g.

• Carbon letters
• /
• v.6 no.4
• /
• pp.227-233
• /
• 2005

Carbonization products C1, C2, C3, C4 and C5 were prepared by the carbonization of date pit in limited air, at 500, 600, 700, 800 and $1000^{\circ}C$, respectively. C1-V-600, C3-V-600, C1-V-1000 and C3-V-1000 were prepared by thermal treatment of C1 and C3 under vacuum at 600 and $1000^{\circ}C$. The textural properties were determined from nitrogen adsorption at 77 K and from carbon dioxide adsorption at 298 K. The surface pH, the FTIR spectra and the acid and base neutralization capacities of some carbons were investigated. The amounts of surface oxygen were determined by out-gassing the carbon-oxygen groups on the surface as $CO_2$ and CO. The adsorption of water vapor at 308 K on C1, C2, C3 and C4 was measured and the decomposition of $H_2O_2$ at 308 K was also investigated on C1, C2, C3, C4 and C5. The surface area and the total pore volume decreased with the rise of the carbonization temperature from 500 to $1000^{\circ}C$. The adsorption of water vapor is independent on the textural properties, while it is related to the amount of acidic carbon-oxygen groups on the surface. The catalytic activity of $H_2O_2$ decomposition does not depend on the textural properties, but directly related to the amount of basic carbon-oxygen complexes out-gassed as CO, at high temperatures.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.658-662
• /
• 2009

In this work, the amine-treated activated carbon nanotubes (A-MWNTs) were used to investigate the $CO_2$ adsorption behaviors. A-MWNTs were prepared by impregnation with amine in methanol after chemical activation methods using a KOH. The characteristics of amine-treated A-MWNTs were studied by X-ray photoelectron spectroscopy (XPS), $N_2$ adsorption, desorption isotherms at 77 K. The specific surface area and pore volume of the A-MWNTs were analyzed by BET equation, BJH method, and t-plot method. $CO_2$ capture capacity as a function of temperature was measured by temperature programmed desorption (TPD). From the results, the amine treatment increased the basicity and nitrogen content of the A-MWNTs. The $CO_2$ adsorption capacity of the amine-nontreated A-MWNTs showed the highest value at room temperature and then greatly decreased with increasing the temperature. However, the amine-treated A-MWNTs presented a softer slope with temperature compared to the amine-nontreated ones. It was due to the strong interactions between $CO_2$ and amino groups presented on the carbon surfaces studied.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.784-791
• /
• 2018

UiO-66 particles were synthesized under various synthesis conditions to study the adsorption of carbon dioxide for hydrogen purification. For the purpose, the design and analysis of experiments was performed using statistical design of experiment method. As the synthesis time, temperature and acetic acid amount increased, the crystallinity of UiO-66 particles increased. Especially, the amount of acetic acid was confirmed as an important factor in determining the crystallinity of the particles. The specific surface area of the particles measured by the nitrogen adsorption method also showed a similar tendency. Using the general factor analysis in the experimental design method, the main effects and interactions of major factors were analyzed. In addition, the carbon dioxide adsorption capacity was predicted using a nonlinear regression method. Then, the adsorption performance was shown through surface and contour maps for all ranges.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.2
• /
• pp.73-80
• /
• 2015

Arsenic which is found in several different chemical forms and oxidation states and causes acute and chronic adverse health effects is a toxic trace element widely distributed in soils and aquifers from both geologic and anthropogenic sources. Arsenic which has a mysterious ability to change color, behavior, reactivity, and toxicity has diverse chemical behavior in the natural environment. Arsenic which has stronger ability to readily change oxidation state than nitrogen and phosphorus due to a consequence of the electronic configuration of its valence orbitals with partially filled states capable of both electron donation and acceptance although the electronegativity of arsenic is greater than that of nitrogen and similar to that of phosphorus. Arsenate (V) is the thermodynamically stable form of As under aerobic condition and interacts strongly with solid matrix. However, it has been known that adsorption and oxidation reactions of arsenite (III) which is more soluble and mobile than As(V) in soils are two important factors affecting the fate and transport of arsenic in the environment. That is, the movement of As in soils and aquifers is highly dependent on the adsorption-desorption reactions in the solid phase. This article, however, focuses primarily on understanding the fate and speciation of As in soils and what fate arsenic will have after it is incorporated into soils.