• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.238-241
• /
• 2011

An average Korean known to ingest 3.4 times of the nitrate ADI level are found to have taken in 97% of nitrates through vegetables. This study analyzed the contents of nitrates and chlorophyll in organic Chinese cabbages, a major favorite vegetable for Koreans, with a view to lowering daily intake of nitrate. Our findings show that, in organically cultivated cabbages, the further outward the leaf was located, the more significantly the contents of nitrates increased, with the midrib and leaf blade showing positive relationship of $r=0.789^{**}$, and $r=0.659^{**}$, respectively. In the case of the midrib, the contents increased as high as 79 times ranging from 40ppm for the innermost leaf to 3, 177ppm for the outermost one, and when it comes to the leaf blade, the contents rose as high as 87 times, showing a range of 40 ~ 3,481ppm. Our findings also suggest that it is advisable to discard 1/3 of the outermost leaves before eating Chinese cabbages, since the outer leaves with known high contents of chlorophyll also have high contents of nitrates.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1480-1488
• /
• 2003

Synthesis of carbon nanomaterials on a substrate coated with metal nitrates using an ethylene fueled inverse diffusion flame was illustrated. The effects of radial distance, residence time of the substrate, and hydrocarbon composition on the synthesis of carbon nanomaterials were investigated. The effects of catalyst metal particles were also studied using SUS304 substrates coated with Fe(NO$_3$)$_3$ (ferric nitrate, nonahydrate) and Ni(NO$_3$)$_2$(nickel nitrate, hexahydrate), and Cu substrate. Carbon nanomaterials, with diameters ranging from 30 - 70 nm, were observed on the substrate for both cases of using substrates only and using them with metal nitrates. In case of using the substrate with metal nitrates, the formation and growth of carbon nanomaterials were occurred in the lower temperature region than that of using the substrates only due to the easy activation of the metal particles coated on the surface of the substrates.

• 청정기술
• /
• 제3권2호
• /
• pp.31-33
• /
• 1997

Nitrate contamination in surface water and ground water have increased in Korea. This trend has raised concern because nitrates caused methemoglobinemia in infants. To remove nitrates from waters, various purification processes including ion-exchange, biological denitrification, and chemical denitrification are currently in use for the treatment of water. However, little economically advantageous process exists for the industrial scale treatment of effluents highly polluted with nitrates. A new process has been developed for nitrate and other salts removal from polluted waters. Alumina cement and lime served as precipitating agents to remove nitrate with stirring at basic pH. Decreasing alumina content in alumina cement result in a increasing in nitrate removal yield. Stable removal of nitrate(1000mg/L) was readily achieved by two-stage removal process.

• 한국식품과학회지
• /
• 제14권2호
• /
• pp.184-186
• /
• 1982

An attempt to detect and determine volatile nitrosamines from fermented anchoby sauce was made by use of GC-TEA. Nitrates and nitrites content were also determined by standard AOAC method. The results showed that only very low level of dimethylnitrosamine (less than 1 ppb) was detected. The nitrates and nitrites content were also very low.

• 월간산업보건
• /
• 통권61호
• /
• pp.20-28
• /
• 1993

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.409-412
• /
• 2001

The high purity manganese oxides were made from the dust, generated in AOD process that produces a medium-low carbon ferromanganese and collected in the bag filter. Manganese oxide content in the dust was about 90%, and its phase was confirmed as Mn₃O₄. In the extraction of manganese, because of remaining amorphous MnO₂, the dust was reduced to MnO by roasting with charcoal. The pulp density of the reduced dust can control pH of the solution more than 4 and then Fe ion is precipitated to a ferric hydroxide. Because a ferric hydroxide co precipitates with Si ion etc, Fe, Si ion was removed f개m the solution. Heating made water to be volatized and nitrates was left in reactor Then nitrates were a liquid state and stirring was possible. Among the nitrates in reactor, only the manganese nitrate which have the lowest pyrolysis temperature pyrolyzed into β-MnO₂powder and NO₂(g) at the temperature less than 200℃. When the pyrolysis of manganese nitrate has been completed about 90%, injection of water stopped the pyrolysis. Nitrates of impurity dissolved and the spherical high purity β-MnO₂powders were obtained by filtering and washing. Mn₂O₃or Mn₃O₄ powder could be manufactured from β-MnO₂powder by controlling the heating temperature. Lastly, a manufactured manganese oxide particle has 99.97% purity.

• 대한화학회지
• /
• 제33권1호
• /
• pp.31-36
• /
• 1989

순수한 아세토니트릴용매에서 질산파라-치환 벤질과 파라-치환 아닐린간의 친핵성 치환반응에 대한 2차반응속도상수를 전기전도도법으로 구하여 Hammett ${\rho}$x와 ${\rho}$y값 및 Bronsted ${\beta}$값을 계산하였다. 이때 아닐린의 치환기 변화에 따르는 ${\rho}$x는 음의 값으로 주어졌으며 기질의 치환기에 따라서는 U자 모양의 비직선성 Hammett 도시가 얻어졌다. 포텐셜에너지표면 및 양자역학적 모형을 적용하여 치환기 변화에 따른 천이상태 구조의 변화를 고찰하여 본 결과 본 반응은 기질의 치환기의 성질에 따라 결합형성의 정도가 크게 변화하는 $S_{N}2$ 반응 메카니즘으로 진행함을 알 수 있었다.

• Journal of Magnetics
• /
• 제7권2호
• /
• pp.29-39
• /
• 2002

The initial NiCuZn synthetic ferrite were acquired from thermally decomposing the metal nitrates $Fe(NO_3)_39H_2O, Zn(NO_3)_26H_2O, Ni(NO_3)_26H_2O, and Cu(NO_3)_23H_2O$ at $150^circ{C}$ for 24 hours, and then we calcined the synthetic powder at $500^circ{C}$, pulverized each of those for 3, 6, 9, 12, and 15 hours in a steel ball mill, sintered each at $700^circ{C}$ to $1,000^circ{C}$ for 1 hour, and thus studied their microstructures and electromagnetic properties. We could make the initial specimens chemically bonded in liquidity at a low-temperature $150^circ{C}$, by using the low melting points less than $200^circ{C}$ of the metal nitrates instead of the mechanical ball-mill pulverization, then narrow a distance between the particles into a molecular one, and thus lower the reaction point of sintering by at least $200^circ{C}$ to $300^circ{C}$. Their initial permeability was 50 to 400 and their maximum magnetic induction density and coercive force, 2,400 G and 0.3 Oe to 0.5 Oe respectively, which was similar to those of NiZnCu ferrite synthesized in the conventional process. In the graph of initial permeability by frequencies, a $180^circ{C}$ rotation of the magnetic domains which appears in a broad band of micro-wave before and after the resonance frequency, could be perceived.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.338-342
• /
• 2004

Ni-Zn ferrite powder was obtained by wet method that was to be coprecipitated the metal nitrates, Fe($NO_3$)$_3$ㆍ$9H_2$O, Ni($NO_3$)$_2$ㆍ$6H_2$O, Zn($NO_3$)$_2$ㆍ$6H_2$O to make a high permeability material. The composition of the ferrite powder was $Fe_2$$O_3$ 52 mol%, NiO 14.4 mol%, ZnO 33.6 mol%. Ni-Zn ferrite powder was compounded by precipitating metal nitrates with NaOH in vessel at the synthetic temperature of $90^{\circ}C$ for 8 hours. Calcination temperature and sintering temperature were $700^{\circ}C$ and $1150^{\circ}C$～$1250^{\circ}C$, respectively, for 2 hours. And the other ferrite powder was also prepared by the wet ball milling that was to be mixed the metal oxides as same as the above chemical composition. We studied the properties of the powder and the electromagnetic characteristics of the sintered cores obtained from there two different processes. Wet direct process produced smaller particle size with narrower distribution of the size and more purified ferrite whose sintered cores had high permeability and high magnetization.

• 한국응용과학기술학회지
• /
• 제8권2호
• /
• pp.145-151
• /
• 1991

Hazadous properties were evaluated for Alkyl nitrates such as hexyl nitrate, decyl nitrate, dodecyl nitrate and 2-methyl pentyl nitrate, 2-hexyl ethyl nitrate. The thermochemical properties such as heat of vaporization, boiling point, flash point and kinetic parameter for aliphatic nitrate were measured to determine the hazadous properties of these compounds. The boiling points and heat of vaporization increase as the increase of alkyl chain length in alkyl nitrates. Flash point is a linear function of boiling point as same as alkanes. The rate equation in isothermal decomposition are 1/2 order and compensation effect is found between logarithm of frequency factor the activation energy, then the decomposition preceeds with simlar reaction mechanism for each nitrate.