• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.128-137
• /
• 2013

Due to the global warming and air pollution, interest in renewable energies has increased in recent years. In particular, the crisis of the depletion of fossil energy resources in the near future has accelerated the renewable energy technologies. Among the renewable energy resources, oceans covering almost three-fourths of earth's surface have an enormous amount of energy. For this reason, various approaches have been made to harness the tremendous energy potential. In order to achieve two purposes: to improve harbor water quality and to use wave energy, this study proposed a sea water exchange structure applying an Oscillating Water Column (OWC) wave generation system that utilizes the air flow velocity induced by the vertical motion of water column in the air chamber as a driving force of turbine. In particular, the airflow velocity in the air chamber was estimated from the time variations of water surface profile computed by using 3D-NIT model based on the 3-dimensional irregular numerical wave tank. The relationship of the frequency spectrums between the computed airflow velocities and the incident waves was analyzed. This study also discussed the characteristics of frequency spectrums in the air chamber according to the presence of the structure, wave deformations by the structure, and the power of the water and air flows were also investigated. It is found that the phase difference exists in the time series data of water level fluctuations and air flow in the air chamber and the air flow power is superior to the fluid flow power.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.3-10
• /
• 2008

We researched recycle of mixed waste acids including HF, $CH_{3}COOH$, $HNO_3$ produced during semiconductor wafer process. At first, we recovered HF in form of $Na_{2}SiF_6$ by precipitation using $NaNO_3$ and $Na_{2}SiO_3$. Concentration of HF was made down from 110 g/L, initial concectration, to 0.5 g/L and Recovery rate of HF was 99.5%. After recovery of HF, concentration of $HNO_3$ and $CH_{3}COOH$ is 498 g/L, 265 g/L respectively. From that mixed acid, we recovered $CH_{3}COOH$ using 2 stages of fractional distillation. In first stage, $CH_{3}COOH$ was distilled for separation from $HNO_3$. And in second stage, we recoverd refined $CH_{3}COOH$ by using fractional distillation for removing a little amount of $HNO_3$ in $CH_{3}COOH$ vapor. The concentration of recovered $CH_{3}COOH$ in second stage is 20% and finally recovery rate of $CH_{3}COOH$ is about 87.5%.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.5
• /
• pp.425-433
• /
• 2019

Sikhye is a traditional rice beverage, produced from steamed rice, barley or wheat malt and water. Nine varieties of barley and seven varieties of wheat cultivars were investigated and compared quality characteristics, diastatic power, and activities of ${\alpha}$- and ${\beta}$-Amylase. For barley malt, the crude lipid and protein content of malt 1.74~2.42% and 10.71~14.36%, respectively. Also, the crude lipid and protein content for wheat malt 1.57~1.71% and 10.07~13.59%, respectively. The 'Dahyang' barley showed the highest diastatic power with $117.61^{\circ}L$, while for wheat, 'Baegjoong' produced the highest diastatic power with $85.25^{\circ}L$. The enzymatic activities, ${\alpha}$- and ${\beta}$-Amylase for barley cultivar was $110.17{\sim}214.70{\mu}nit/g$ and $869.73{\sim}1,638.43{\mu}nit/g$, respectively. Likewise, ${\alpha}$- and ${\beta}$-Amylase for wheat cultivar was $73.19{\sim}132.23{\mu}nit/g$ and $726.70{\sim}889.30{\mu}nit/g$, respectively. The highest sugar content of Sikhye from barley was $11.10^{\circ}Bx$ ('Hyeda'), while from wheat, was $10.20^{\circ}Bx$ ('Baegjoong'). Among the four free sugar components analyzed from Sikhye, maltose was the highest in all cultivars. The highest maltose content was produced in 'Dahyang' Sikhye at 6.91%. There was significant positive-correlation among the diastatic power and enzymatic activities of malt and free sugar components in Sikhye.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2005.11a
• /
• pp.378-378
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.391-398
• /
• 1998

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through the road test and the experiment using a engine dynamo, namely, the trial and error process. This approach require very high cost and long time consuming to develop the system. In this study, the simulator which had a speaker in the cylinder head was presented. It was easy to analyze the acoustic characteristic of the intake system in laboratory environment. This study presented a improvement to reduce the level of the intake noise using the Transfer Matrix Method and NIT/SYSNOISE, FE analysis commercial software. It was to select optimum position of a resonator and verified by the simulator. This simulator can be used early in the design stage of development of the intake system.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.126-128
• /
• 2014

디지털 방송기술의 비약적인 발전으로 기존 HD(High Definition) 화질의 4~16배까지 지원 가능한 UHD(Ultra High Definition) 방송 서비스가 제공되는 새로운 시대를 맞이하게 되었다. UHD 방송은 초고선명 비디오와 22.2 채널 오디오 서비스가 가능한 차세대 실감방송 기술이다. 이러한 UHD 서비스를 제공하기 위해서는 고압축 영상 코덱 기술인 HEVC(High Efficiency Video Coding), OFDM(Othogonal Frequency Division Multiplexing) 기반 대용량 전송기술과 다양한 멀티미디어 부가서비스 가능한 전송 프로토콜이 필수적으로 요구된다. 최근 UHD 방송 전송 프로토콜로 표준화 추진 중인 MMT(MPEG Media Transport)는 이기종망에서 적용할 수 있으며, 양방향 전환이 가능하여 시청자의 요구사항을 실시간으로 반영할 수 있다는 장점을 지닌다. 한편, 지상파 UHD 방송 서비스를 빠르고 효과적으로 수신하기 위해 필요한 정보인 NIT(Network Information Table), RRT(Rating Region Table) 및 SDT(Service Description Table)가 MMT 시그널링 프로토콜에서는 포함되어 있지 않다. 따라서 본 논문에서는 지상파 UHD 방송 서비스의 효과적 수신이 가능한 MMT 기반 지상파 UHD 방송을 위해 NIT, RRT 및 SDT 정보가 포함된 서비스 시그널링 구조을 제안한다.

• The Plant Pathology Journal
• /
• v.16 no.4
• /
• pp.227-230
• /
• 2000

A total of 90 isolates of Fusarium oxysporum f.sp. melonis, the causal agent of oriental melon (Cucumis melo var. makuwa) wilt, was isolated from symptomatic tissues of oriental melon from 4 provinces in Korea. These isolates were grouped into vegetative compatibility groups (VCGs) by demonstrating heterokaryosis through complementation using nitrate nonutilizing (nit) mutants. No self-incompatibility was observed in any of isolates. All isolates were grouped into 3 VCGs ; A, B, and C. iSOLATES BELONGING TO VCG A and VCG B accounted for 87% and 91% of the fungal population collected in 1991 and 1993, respectively. As the increment of cultivation period in the same field, the proportion of isolates belonging to VCG B increased whereas that of isolates belonging to VCG A decreased. Mean virulence of a total population increased as the increment of cultivation period in the same field. Isolates belonging to VCG B showed the highest increment of virulence. These data suggest that replanting of a host plant in the same field may cause increase of virulence in the pathogens. Furthermore, virulence of F. oxysporum f.sp. melonis isolates is related to the VCGs.

• Steel and Composite Structures
• /
• v.28 no.5
• /
• pp.629-639
• /
• 2018

In this paper, the vibroacoustic responses of baffled laminated composite sandwich flat panel structure under the influence of harmonic excitation are studied numerically using a novel higher-order coupled finite-boundary element model. A numerical scheme for the vibrating plate has been developed in the frame work of the higher-order mid-plane kinematics and the eigen frequencies are obtained by employing suitable finite element steps. The acoustic responses are then computed by solving the Helmholtz wave equation using boundary element method coupled with the structural finite elements. The proposed scheme has been implemented via an own MATLAB base code to compute the desired responses. The validity of the present model is established from the conformance of the current natural frequencies and the radiated sound power with the available benchmark solutions. The model is further utilized to scrutinize the influence of core-to-face thickness ratio, modular ratio, lamination scheme and the support condition on the sound radiation characteristics of the vibrating sandwich flats panel. It can be concluded that the present scheme is not only accurate but also efficient and simple in providing solutions of the coupled vibroacoustic response of laminated composite sandwich plates.

• Geomechanics and Engineering
• /
• v.12 no.1
• /
• pp.85-109
• /
• 2017

The paper presents the laboratory study of clayey soil stabilized with Pond ash (PA), Rice husk ash (RHA), cement and their combination used as stabilizers to develop and evaluate the performance of clayey soil. The effect of stabilizer types and dosage on fresh and mechanical properties is evaluated through compaction tests, unconfined compressive strength tests (UCS) and Split tensile strength tests (STS) performed on raw and stabilized soil. In addition SEM (scanning electron microscopy) and XRD (X-ray diffraction) tests were carried out on certain samples in order to study the surface morphological characteristics and hydraulic compounds, which were formed. Specimens were cured for 7, 14 and 28 days after which they were tested for unconfined compression tests and split tensile strength tests. The moisture and density curves indicate that addition of RHA and pond ash results in an increase in optimum moisture content (OMC) and decrease in maximum dry density (MDD). The replacement of clay with 40% PA, 10% RHA and 4% cement increased the strength (UCS and STS) of overall mix in comparison to the mixes where PA and RHA were used individually with cement. The improvement of 336% and 303% in UCS and STS respectively has been achieved with reference to clay only. Developed stabilized soil mixtures have shown satisfactory strength and can be used for low-cost construction to build road infrastructures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.109-112
• /
• 2004

최근들어, TFT LCD 업체들의 제품 대형화에 따라서 서서히 제품군이 중, 대형 TV를 중심으로 넓은 광시야각 기술 (FFS, IPS, VA)이 적용되고 있으며 고휘도, 고속응답, 고색순도 등 성능향상을 지속하는 가운데 LCD 백라이트로써 LCD TV에 적용하기 위해서는 무엇보다도 현재 기존 제품군보다 높은 휘도 특성의 개선이 요구되고 있다. TV 대응 LCD Panel 은 Monitor 대응 제품에 비해서 일반적으로 해상도가 낮으므로, 투과율면에서 장점은 있으나, 현재의 백라이트 구조로는 만족할만한 성능을 낼 수 없는 상황이다. 그러므로 고휘도 백라이트를 위해서 직하방식 백라이트에 대한 개발 검토가 활발히 이루어지고 있다. 따라서 본 연구에서는 백라이트에서 6500nits를 목표로 직하형 백라이트의 시뮬레이션을 실시하였으며, 램프간 거리, 리플렉터와 램프간 거리, 램프와 확산판간 거리등에 해한 최적화를 통하여 총두께에 따른 특성분석을 실시하였다. 특히, 램프의 수량에 따른 휘도 시뮬레이션을 통해서 백라이트별 기구치수를 결정할 수 있었다. 본 연구에서의 목적인 6500nits의 휘도는 프리즘시트의 적용을 통하여 달성하였다.