• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.105-110
• /
• 2005

Programmable Logic Controller(PLC) is the most widely utilized among many sorts of existing controller for the design of factory automation control system, and study about a PLC language is peformed actively. In this paper, we proposed the encoding module that we increase input points when increased of the input machine which is going to control it in the FA design that used PLC. Input point is going to be extended with 2-3 points in the state that cannot equip input unit in basic base any more. Then an extension base, a power supply, an extension cable and an output nit must be equipped particularly. Then a cost must be added very much. This paper proposed the encoding module which extended an input in a small quantity, and we confirmed a feasibility through a simulation.

• Computers and Concrete
• /
• v.21 no.4
• /
• pp.463-470
• /
• 2018

In the present study, soft computing i.e., machine learning techniques and regression models algorithms have earned much importance for the prediction of the various parameters in different fields of science and engineering. This paper depicts that how regression models can be implemented for the prediction of compressive strength of concrete. Three models are taken into consideration for this; they are Gaussian Process for Regression (GPR), Multi Adaptive Regression Spline (MARS) and Minimax Probability Machine Regression (MPMR). Contents of cement, blast furnace slag, fly ash, water, superplasticizer, coarse aggregate, fine aggregate and age in days have been taken as inputs and compressive strength as output for GPR, MARS and MPMR models. A comparatively large set of data including 1030 normalized previously published results which were obtained from experiments were utilized. Here, a comparison is made between the results obtained from all the above mentioned models and the model which provides the best fit is established. The experimental results manifest that proposed models are robust for determination of compressive strength of concrete.

• Smart Structures and Systems
• /
• v.26 no.5
• /
• pp.641-656
• /
• 2020

The finite element solutions of thermal buckling load values of the graded sandwich curved shell structure are reported in this research using a higher-order kinematic model including the shear deformation effect. The numerical buckling temperature has been computed using an in-house specialized code (MATLAB environment) prepared in the framework of the current mathematical formulation. In addition, the mathematical model includes the excess structural distortion under the influence of elevated environment via Green-Lagrange nonlinear strain. The corresponding eigenvalue equation has been solved to predict the critical buckling temperature of the graded sandwich structure. The numerical stability and the accuracy of the current solution have been confirmed by comparing with the available published results. Thereafter, the model is extended to bring out the influences of structural parameters i.e. the curvature ratio, core-face thickness ratio, support conditions, power-law indices and sandwich types on the thermal buckling behavior of graded sandwich curved shell panels.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.45-50
• /
• 2000

This paper proposes a delta energy method based on Parameter Filtering(PF), which is a speech segmentation algorithm for text dependent speaker verification system over telephone line. Our parametric filter bank adopts a variable bandwidth along with a fixed center frequency. Comparing with other methods, the proposed method turns out very robust to channel noise and background noise. Using this method, we segment an utterance into consecutive subword units, and make models using each subword nit. In terms of EER, the speaker verification system based on whole word model represents 6.1%, whereas the speaker verification system based on subword model represents 4.0%, improving about 2% in EER.

• Analytical Science and Technology
• /
• v.24 no.3
• /
• pp.219-224
• /
• 2011

Voltammetric analysis of Cl(I) ion was performed using a metal gold (Au) electrode (AE) and a carbon nanotube electrode (CNTE). After the examination, the AE was found to have more sensitively detected Cl(I) than CNTE. The optimum analytical conditions for the cyclic voltammetry (CV) and the square wave (SW) stripping voltammetry were performed using AE. The detection limit of $6.5\;{\mu}g/L$ Cl(I) was attained. The developed techniques were compared with the common Cl meter and applied to water systems.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.3
• /
• pp.123-130
• /
• 2002

Recently, it is being studied on the high strength concrete in many laboratories and being applied to the construction field actually. But non-destruction testing equation that to be proposed about normal strength concrete in Japan has been using because the systematic study results for the estimation of compressive strength of high strength concrete do nit exist. So it is essential to suggest the non-destruction testing equation for the estimation of compressive strength of high strength concrete. This is an experimental study to analyze and investigate the non-destruction testing equation for the estimation of compressive strength of high strength concrete. The results are as follows; The relation between rebound number, pulse velocity and compressive strength of high strength concrete have lower coefficient than combined method of rebound number and pulse velocity. Also new non-destructive testing equation for the estimation on the compressive strength of high strength concrete was suggested in this study, and it is considered that these equations have possibility to be applied in domestic construction field.

• Smart Structures and Systems
• /
• v.15 no.5
• /
• pp.1215-1232
• /
• 2015

In the present paper, a method for identifying damage in a multi storeyed shear building structure is presented using minimum number of modal parameters of the structure. A damage at any level of the structure may lead to a major failure if the damage is not attended at appropriate time. Hence an early detection of damage is essential. The proposed identification methodology requires experimentally determined sparse modal data of any particular mode as input to detect the location and extent of damage in the structure. Here, the first natural frequency and corresponding partial mode shape values are used as input to the model and results are compared by changing the sensor placement locations at different floors to conclude the best location of sensors for accurate damage identification. Initially experimental data are simulated numerically by solving eigen value problem of the damaged structure with inclusion of random noise on the vibration characteristics. Reliability of the procedure has been demonstrated through a few examples of multi storeyed shear structure with different damage scenarios and various noise levels. Validation of the methodology has also been done using dynamic data obtained through experiment conducted on a laboratory scale steel structure.

• The Journal of Korean Medicine
• /
• v.20 no.3 s.39
• /
• pp.54-65
• /
• 1999

Objectives: Hepatoma is a very serious disease in Korea and vvorldwiclc. Hepatitis B vims (HBV) has proved the most significant cause of hepatoma. We canied out this study to investigate the effect of Acanthopanax sessilifloms on inhibiting cell proliferation and DNA synthesis in HepG2.2.15 cell line and on inhibiting phosphorilation of oncogene (MAP kinase) in NIT/3T3-HBx ceIl. Methods: To investigate the anti-cancer effect of Acanthopanax sessiliflorus, we did the CellTiter 96 Aqueous Non-radioactive Cell Proliferation assay (Promega); MTS/PMS assay, [$^3H$]-thymicline incorporation assay, and we measured the gene expression through westem blotting. Results: Acanthopanax sessiliflorus showed an inhibiting effect on the increase of HepG2.2.15 in the NTS/PMS assay. It also showed an inhibiting effect on DNA synthesis of HepG2.2.15 in the [$^3H$]-thymidine incorporation assay. Acanthopanax sessiliflorus showed an inhibiting effect of phosphorilation of MAP kinase in HBV - X genes. too. Conclusions: The results suggested that this herb had an anti cancer effect. We may discover an effective anti-cancer herb medicine through further studies on this herb medicine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.131-134
• /
• 2009

We have developed a flexible OTFT backplane in which all the dielectrics are formed by solutionprocess in order to achieve low-cost and highthroughput manufacturing. The backplane successfully drives a flexible AM-OLED display with peak brightness of > 200 nit and the contrast ratio of > 1000:1 with great mechanical flexibility.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.231-234
• /
• 2009

In order to realize the high luminance and luminous efficacy MFFLs for LCD backlights, we optimized the phosphor profile to enlarge the surface area. The MFFL with the new phosphor profile shows a very wide luminance range from 2,600 to 17,000 nit with the corresponding luminous efficacy from 66 to 32.5 lm/W. The results were obtained with the color coordinate of the phosphor to be around (0.25, 0.23). And the single cell is expanded into a multi-structured configuration to realize a 32 inch-sized lamp by a simple repetition of the single cells, and a new driving scheme is proposed for an adaptive local dimming and scanning drive using dual auxiliary electrodes and bipolar drive scheme. Especially the ultra high luminance and luminous efficacy results suggest the duty time of illumination of the backlight unit can be significantly reduced.