• 통합자연과학논문집
• /
• 제4권2호
• /
• pp.130-136
• /
• 2011

This study investigated the adsorption characteristics of nickel, zinc and cadmium ions from the aqueous solution onto the alginate bead. Adsorption equilibrium capacities of the heavy metal ions increased with increasing initial pH of the solution. The adsorption equilibrium isotherm of the heavy metal ions was well represented by Langmuir equation. The magnitude of adsorption capacity of the heavy metal ions onto alginate bead was the order of cadmium > zinc > nickel. Kinetic parameters were measured in a batch adsorber to analyze the adsorption rates of the heavy metal ions. The internal diffusion coefficient of the heavy metal ions in the intraparticle were determined by comparing the experimental concentration curves with those predicted from the surface diffusion model (SDM) and pore diffusion model (PDM). The internal diffusion of the heavy metal ions in the intraparticles was explained by PDM.

• 청정기술
• /
• 제19권3호
• /
• pp.347-350
• /
• 2013

견운모에 흡착된 니켈이온의 탈착과 재생특성에 관한 연구가 최적의 탈착제로서 선정된 $HNO_3$를 이용하여 수행되어졌다. 견운모에 흡착된 니켈이온의 탈리는 주사전자현미경과 에너지 분산형 X선 분광기에 의해서 확인 되어졌다. 20 mM의 농도에서 니켈이온의 탈착율은 100%였다. 또한, 투입된 흡착제의 양과 탈착제의 부피로서 정의되는 S/L비가 1.0내에서는 니켈이온은 완전히 탈착 되어졌으며 탈착 공정은 60분내에 빨리 일어났다. 마지막으로 재사용된 견운모를 이용하였을 때 4회까지는 니켈이온의 탈착율이 일정하게 유지되었다.

• Membrane and Water Treatment
• /
• 제10권3호
• /
• pp.239-244
• /
• 2019

Plating wastewater containing various heavy metals can be produced by several industries. Specifically, we focused on the removal of copper (Cu2+) and nickel (Ni+) ions from the plating wastewater because all these ions are strictly regulated when discharged into watershed in Korea. The application of both nanofiltration (NF) and reverse osmosis (RO) technologies for the treatment of wastewater containing copper and nickel ions to reduce fresh water consumption and environmental degradation was investigated. In this work, the removal of copper (Cu2+) and nickel (Ni+) ions from synthetic water was studied on pilot scale remove by before using two commercial nanofiltration (NF) and reverse osmosis(RO) spiral-wound membrane modules (NE2521-90 and RE2521-FEN by Toray Chemical). The influence of main operating parameters such as feed concentration on the heavy metals rejection and permeate flux of both membranes, was investigated. Synthetic plating wastewater samples containing copper ($Cu^{2+}$) and nickel ($Ni^{2+}$) ions at various concentrations(1, 20, 100, 400 mg/L) were prepared and subjected to treatment by NF and RO in the pilot plant. The results showed that NF, RO process, with 98% and 99% removal for copper and nickel, respectively, could achieve high removal efficiency of the heavy metals.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.201-206
• /
• 2020

Electrodialysis (ED) is used in wastewater treatment, during the processing and recovery of beneficial materials, to produce usable water. In this study, sulfate and chlorine ions, which are the anions majorly used for electroplating, were studied as factors affecting the recovery of copper, nickel and water from wastewater by electrodialysis. Although the removal rates of copper and nickel ions were slightly higher with the use of chlorine ions than of sulfate ions, the removal efficiencies were above 99.9% under all experimental conditions. The metal ions of the plating wastewater flowed through the ion exchange membrane of the diluate tank and the concentrate tank while all the water moved together due to electro-osmosis. The migration of water from the diluate tank to the concentrate tank was higher in the presence of a monovalent chloride ion compared to that of a divalent sulfate ion. When sulfate was the anion used, the recoveries of copper and nickel increased by about 25% and 30%, respectively, as compared to the chloride ion. Therefore, when divalent ions such as sulfate are present in the electrodialysis, it is possible to reduce the movement amount of water and highly concentrate the copper and nickel in the plating wastewater.

• 자원리싸이클링
• /
• 제2권4호
• /
• pp.23-26
• /
• 1993

This work is carried out to develop the recovery process of vanadium as vanadium pentoxide and nickel as nickel sulphate from the leaching solution of heavy oil fly ash. First, sodium chlorate solution was added to the leaching solution to oxidize vanadium ions. With adjusting pH of the solution and heating, vanadium ions(V) is hydrated and precipitated as red cake of $V_2O_5$ from the solution. After recovering vanadium, nickel is recovered as ammonium nickel sulfate with crystallization process. From this nickel salt, nickel sulfate which meets the specifications for the electroplating industry can be produced economically. More than 85% of vana-dium and nickel in the fly ash are recovered in this process.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.189-192
• /
• 2010

• 공업화학
• /
• 제28권5호
• /
• pp.529-533
• /
• 2017

본 연구에서는 백합나무 biochar에 수증기를 사용하여 활성화 공정이 첨가된 새로운 형태의 생물흡착제를 제조하였다. 이 생물흡착제를 이용하여, 수중에서 니켈 이온의 제거 특성을 고찰하였다. 5와 10 mg/L 니켈 이온을 제거하기 위하여 흡착 평형 실험이 이루어졌을 때, 니켈 이온의 흡착량은 각각 4.2 mg/g과 5.4 mg/g을 나타내었다. 또한 두 가지 니켈농도(5, 10 mg/L)의 제거 효율을 증가시키기 위한 최적의 초기 pH가 6임을 알 수 있었다. 그리고 수중에 함유된 10 mg/L 니켈이온 제거능력을 향상시키기 위하여 생물흡착제에 구연산을 이용한 화학적 처리가 이루어졌다. 또한, 4 M 구연산으로 개질된 흡착제를 사용하여 2 h 반응시켰을 때, 10 mg/L 니켈 이온은 100% 제거 효율을 나타내었다. 그리고 니켈 이온 회수를 위한 탈착 실험한 결과, 0.1 M Nitrilotriacetic acid (NTA)가 최적의 탈착제로 선정하였다. 따라서 이러한 실험 결과들은 경제적이고 친환경적인 기술로서 니켈 처리 공정 개발에 활용될 수 있을 것이다.

• 한국습지학회지
• /
• 제20권4호
• /
• pp.410-416
• /
• 2018

본 연구는 탄소나노튜브(MWCNT)와 활성탄을 이용한 니켈과 구리의 흡착특성을 평가하였다. 산성조건에서 활성탄의 제거성능이 낮은 반면, MWCNT만 니켈과 구리를 흡착 제거하는데 효율적이었다. MWCNT와 중금속의 흡착반응은 유사 일차반응식을 따랐다. 초기 pH가 중성일 때, 니켈은 MWCNT에 의해 신속히 제거되었고, 활성탄은 4시간에 각각 99.02%와 80.30%를 나타냈다. 또한, 구리이온은 초기 pH가 중성일 때 4시간내에 효율적으로 제거되었다. 흡착제 주입량을 증가함에 따라 pH가 증가하였고, 중금속 제거율도 증가하였다. 또한, 산화 전처리 공정은 MWCNT의 중금속 제거율을 증가시켰다.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.111-115
• /
• 2014

X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM) were used to investigate the influence of Ni ions on the structural, electronic, and magnetic properties of nickel-ferrites ($Ni_xFe_{3-x}O_4$). Spinel $Ni_xFe_{3-x}O_4$ ($x{\leq}0.96$) samples were prepared as polycrystalline thin films on $Al_2O_3$ (0001) substrates, using a sol-gel method. XRD patterns of the nickel-ferrites indicate that as the Ni composition increases (x > 0.3), a structural phase transition takes place from cubic to tetragonal lattice. The XPS results imply that the Ni ions in $Ni_xFe_{3-x}O_4$ substitute for the octahedral sites of the spinel lattice, mostly with the ionic valence of +2. The minority-spin d-electrons of the $Ni^{2+}$ ions are mainly distributed below the Fermi level ($E_F$), at around 3 eV; while those of the $Fe^{2+}$ ions are distributed closer to $E_F$ (~1 eV below $E_F$). The magnetic hysteresis curves of the $Ni_xFe_{3-x}O_4$ films measured by VSM show that as x increases, the saturation magnetization ($M_s$) linearly decreases. The decreasing trend is primarily attributable to the decrease in net spin magnetic moment, by the $Ni^{2+}$ ($2{\mu}_B$) substitution for octahedral $Fe^{2+}$ ($4{\mu}_B$) site.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.114-118
• /
• 2013

최근 금속자원 재활용과 환경보호에 대한 기술적 필요성에 의해 구리(Cu)를 주성분으로 하는 동합금으로부터 니켈, 주석 등의 유가금속 분리/회수에 대한 관심이 높아지고 있다. 본 연구에서는 동합금에 포함된 유가금속들을 분리/회수하는 기초연구중 하나로서, 킬레이트 수지를 이용하여 동합금 제련시 발생하는 부산물에 포함되어 있는 대표적인 유가금속인 니켈(Ni)을 분리/추출할 수 있는 농축 공정의 가능성에 대해 검토하였다. 킬레이트 수지는 원자량이 높은 $Cu^{2+}$ 이온을 $Ni^{2+}$ 이온보다 선택적으로 흡수하였으며, 이러한 과정을 수차례 반복함으로써 실제 동합금 부산물 샘플의 $Ni^{2+}$ 및 $Cu^{2+}$ 이온을 농축할 수 있었으며, XRF 분석을 통하여 각각 70 % 및 99 %의 농도로 분리할 수 있음을 확인하였다.