• Clean Technology
• /
• v.13 no.4
• /
• pp.274-280
• /
• 2007

A liquid-liquid solvent extraction process was developed in this study to recover Fe and Ni from heavily concentrated aqueous ferric chloride solution, in an effort to substitute the conventional iron reduction method. Solvent composition and extraction conditions were first developed from the laboratory experiments, and the pilot system was designed and built for commercialization. Stage numbers for extraction and stripping were determined from pilot plant runs, and other operation data were obtained for mass production.

• Clean Technology
• /
• v.23 no.4
• /
• pp.393-400
• /
• 2017

In this study, we have developed a process for separating and recovering Ni and Fe in solution through a new solvent instead of TBP and Alamine336, which are solvents used in the conventional solvent extraction method. Experimental conditions were optimized through lab test and a $10L\;h^{-1}$ pilot plant was constructed for commercialization. In addition, the process data for mass production were obtained through pilot experiment and it was confirmed that there is no problem in product quality that can be used through the corrosion test of ferric chloride.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.479-483
• /
• 2010

9% nickel alloy steels used for LNG, cryogenic liquid, storage tank are welded with dissimilar Inconel or Hastelloy welding rod and the weldment shows similar characteristic with the dissimilar metal weld of low carbon steel and austenitic stainless steel. Band type indications are sometimes shown on the film during radiography test of the weldments. Thus this study identified whether the indications are non-relevant indications through material, radiographic test, ultrasonic test, liquid penetrant test and microstructure analysis and also proposed radiography film interpretation and cause of band type indications.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.266-268
• /
• 2006

The effects of the brazing temperature and homogenizing time for brazed specimens on the joint of Ni-based superalloys such as Haynes 250, Inconel 617 and Hastelloy-X were investigated. The brazing alloy is nickel base MBF 15. The foil had a thickness of $38{\mu}m$, which was used two sheets of that for the all experiments. The experimental brazing was carried out by a brazing process in a vacuum of approximately $2{\times}10^{-5}$ Torr, an applied pressure of about 0.74MPa and the three kinds of brazing temperatures were 1100, 1150, and $1190^{\circ}C$ for a holding time of 5 to 1440 minutes. Microstructural observations were made on the cross-sectional samples by using an optical microscope(OM), scanning electron microscope(SEM), and electron probe X-ray microanalyzer(EPMA). The tensile tests were performed at room temperature with a cross head speed 1.5 mm/min according to ASTM E8M. The results show that excellent joint tensile strengths of as high as 788MPa were obtained when processed at $1190^{\circ}C$ for 5 minutes.

• Journal of Nutrition and Health
• /
• v.8 no.1
• /
• pp.39-46
• /
• 1975

This studies were designed to know the contents of trace element and magnesium in cereals. Twenty two kinds of cereal, 104'samples, were analyzed by atomic absorption spectrophotometer for the determination of Manganese, Iron, Magnesium, Chrome, Cupper, Nickel, Zinc, Stannous, Lead and Cadmium. The results are as follows: 1) The contents of Mn and Fe in the sesame group show highest value and next is bean group. In the rice group its content shows lowest value than other cereals. 2) In the Cr content its value is lower than other elements in cereals respectively. Cr content of sesame and bean group show higher than rice and barley group. 3) The contents of Cu and Ni in the sesame and bean group show higher value than the value of rice and barley group. Its contents of rice and barley group is almost equal in Cu and Ni. 4) For the Zn content the value of sesame group is higher than other cereals and next is bean group. In the Sn content the value of bean group shows higher one than other cereals. The contents of Zn and Sn in rice and barley group are lower than other cereals. 5) The value of Pb is almost equal to each cereal. The content of Cd in bear group and barley group show higher than other cereals and its value of rice group is equal to the value of barley group.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.179-183
• /
• 2007

A plate heat exchanger (PHE) normally uses vacuum brazing technology for connecting plates and fins. However, the reliability of high temperature brazing, especially with nickel-based filler metals containing boron the formation of brittle intermetallic compounds (IMCs) in brazed joints is of major concern. since they considerably degrade the mechanical properties. This research was examined the vacuum brazing of commercially SUS304 stainless steel with BNi-2 (Ni-Cr-B-Si) filler metal, and discussed to determine the influence of brazing temperatures on the microstructure and mechanical strength of brazed joints. In the metallographic analysis it is observed that considerable large area of Cr-B intermetallic compound phases at the brazing layer and the brazing tensile strength is related to removal of this brittle phase greatly. The mechanical properties of brazing layer could be stabilized through increasing the brazing temperature over $100^{\circ}C$ more than melting temperature of filler metals, and diffusing enough the brittle intermetallic compound formed in the brazing layer to the base metal.

• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.170-181
• /
• 2008

The shape of rectangular cup used for Ni-MH(Nickel-coated Metal Hydrogen) battery for hybrid car looks quite simple, but the forming process of extruding and setting up process design are highly difficult. Furthermore, there are few concrete reports on the rectangular deep drawn cup as part of hybrid vehicles till now. In this study, process design for rectangular cup in the multi-stage deep drawing process is carried out, and FE analysis is also preformed based on the result of the process design. From the simulation result, some unexpected problems such as earing, wrinkling and excessive thickness changes of the intermediate blank occurred. To overcome these failures, a series of modification for punch shape in the forming process design are completed and applied. Considering the modified punch shape in the multi-stage deep drawing process, additional FE analysis is also carried out and the simulation result is verified in view of the deformed shape, thickness change and effective strain distribution. The result of FE analysis with the improved process design confirmed not only reducing thinning of wall and possibilities of failure but also improving the quality of drawing product through the modification of punch shape.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.199-202
• /
• 2009

본 연구에서는 내부 개질반응에서 사용되는 고함량의 니켈촉매(Ni/Al2O3계열 촉매)제조를 위해, 요소(urea)를 이용한 균일용액 침전법을 이용하여 니켈이 고분산된 52wt% Ni/$Al_2O_3$ 촉매를 제조하였다. 제조 촉매는 BET 표면적, 니켈분산도, 니켈표면적 등 물리.화학적 물성 모두 우수하였으며, 환원 패턴은 상용촉매와 비슷하게 나타났다. 실제 반응온도인 $650^{\circ}C$에서 소성하여 화학흡착을 비교한 결과,상용촉매는 니켈분산도 및 니켈표면적이 감소한 반면 균일용액 침전법으로 제조한 촉매는 거의 변화가 없었다. 개질 성능 또한 상용촉매보다 우수하였는데, 이것은 균일용액 침전법으로 제조한 촉매는 활성점(니켈)이 지지체에 나노사이즈로 고르게 잘 분산되었기 때문이라고 판단하였다. 또한 합성온도 조절을 통해, $650^{\circ}C$ 소성 후에 물성변화를 살펴보았고 합성온도 $85^{\circ}C$에서 고분산 니켈 촉매 제조가 가능하였다.

• Korean Journal of Materials Research
• /
• v.14 no.12
• /
• pp.857-862
• /
• 2004

Production of titanium powder directly from tantalum oxides ($TiO_2$) pellet through an electronically mediated reaction (EMR) by calciothermic reduction has been investigated. Feed material ($TiO_2\;pellet$) and reductant (Ca-Ni alloy) were charged into electronically isolated locations in a molten calcium chloride ($CaCl_2$) bath at $950^{\circ}C$. The current flow through an external circuit between the feed (cathode) and reductant (anode) locations was monitored during the reduction of $TiO_2$. The current approximately 3.2A was measured during the reaction in the external circuit connecting cathode and anode location. After the reduction experiment, pure titanium powder with low nickel content was obtained even though Ca-Ni alloy was used as a reductant. These results demonstrate that titanium powder can be produced without direct physical contact between the feed and reductant. In certain experimental conditions, pure titanium powder with approximately $99.5\;mass\%$ purity was successfully obtained.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1034-1040
• /
• 1997

Temperature distribution of battery module consists of 11 batteries of 90Ah rate is analyzed using commercial software NISA II. Equivalent thermal resistance network is used to reduce the number of element in calculating heat transfer through a medium composed of several different thermal conductivity layers. Orthotropic model is used to put different thermal conductivity values according to Cartesian coordinate. Aluminum cooling fins are inserted in the middle of batteries to reduce battery module temperature. The cooling fin at the end of the module does not necessary in reducing maximum temperature. Combined effect of front and side cooling fin is analyzed to reduce the temperature difference among batteries. The maximum temperature difference among batteries is reduced within $3^{\circ}C$ when 4 aluminum cooling tin of 1mm thickness is inserted in battery module.