• Journal of Magnetics
• /
• 제2권1호
• /
• pp.25-27
• /
• 1997

Ferrite tile absorber is of great concern for the application to anechoic chambers due to the growing demand of EMI or EMC measurements. This paper investigates the magnetic, dielectric and microwave absorbing properties of a Ni-An ferrite for the purpose. A design chart was constructed with the solutions of impedance-matching equation in the radio frequencies (30 MHz - 1 GHz). The material parameters for zero-reflection are predicted from the chart. The magnetic and dielectric properties of sintered Ni-Zn ferrite is found to be well suited for this requirements. A superior microwave absorbing properties (frequency band and absorber thickness) of the samples are demonstrated.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.212-218
• /
• 2017

$Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrite powders were prepared by self-propagating high temperature synthesis followed by classifying with an ultrasonic wet-magnetic separation unit to get high pure nano-sized particles. The $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrites were well formed by using several powders like iron, nickel oxide, zinc oxide and magnesium oxide at 0.1 MPa of oxygen pressure. The ultrasonic wet-magnetic separation of pre-mechanical milled ferrite powders resulted in producing the powders with average size of 800 nm. The addition of a surfactant during the wet-magnetic separation process improved productivity more than twice. The coercive force, maximum magnetization and residual magnetization of the $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ nano-powders with 800 nm size were 3651 A/m, $53.92Am^2/kg$ and $4.0Am^2/kg$, respectively.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.201.2-201.2
• /
• 2016

$Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrite powders were prepared by self-propagating high temperature synthesis followed by classified by ultrasonic wet-magnetic separation method to get nano-sized particles with high purity. The $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrites were well formed by using several powders like iron, nickel oxide, zinc oxide and magnesium oxide at 0.1 MPa of oxygen pressure. The ultrasonic wet-magnetic separation of pre-mechanical milled ferrite powders produced the powders with average size of $3.7-0.8{\mu}m$. The addition of a surfactant during the separation process improved productivity more than twice. The coercive force, maximum magnetization and residual magnetization of the $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ nano-powders with 810 nm size were 45.89 Oe, 53.92 emu/gOe, 0.4 emu/Oe, respectively.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.406-411
• /
• 2002

Ni-Zn ferrite is required to have predominant and stable characteristics in the range of high frequency for the power line communication, so that microstructures and magnetic properties such as power loss and initial permeability in $Ni_{0.8}Zn_{0.2}Fe_2O_4$ were investigated in terms of variable $Bi_2O_3,CaO$ and $V_2O_5$ contents. $Bi_2O_3$ and $V_2O_5$ liquid phase created during sintering process promoted sintering and grain growth but much of the closed pore existed in the grains. The grain size of the specimens with $V_2O_5$ of over 0.5 wt% decreased as the result of "pinning effect"and the resonance frequency increased with CaO of 0.3we%. The high initial permeability of 81.52%, resonance frequency of 17.05 MHz and low power loss of 17,858 kW/$\textrm{m}^3$ were obtained from the samples with $Bi_2O_3$ of 0.5, CaO of 0.3, and $V_2O_5$ of 0.7 wt%.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1995년도 추계연구발표회 논문개요집
• /
• pp.72-73
• /
• 1995

• 한국자기학회지
• /
• 제5권1호
• /
• pp.15-20
• /
• 1995

연자성재료인 Mn-Zn 페라이트에 미량의 첨가물로 CaO(0.1 mol%), NiO(0.0~6.0 mol%) 그리고 CoO(0.0~0.8 mol%) 첨가하여 20 종류의 시료를 공침법으로 제조하여, 첨가물의 첨가량에 따른 Mn-Zn 페라이트의 자기적 성질을 연구하였다. NiO, CoO의 첨가량이 증가함에 따라 초기투자율은 감소하고, 반면 Curie 온도는 증가하였다. 보자력$(H_{c})$, 포화자화$(B_{s})$ 및 자기이력손실$(W_{h})$은 NiO의 첨가량이 증가함에 따라 증가하는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1652-1654
• /
• 2000

고상반응법을 이용하여 $Ni_{0.6-x}Cu_{x}Zn_{0.4}Fe_{2}O_4$(x=0, 0.1, 0.2, 0.3) ferrite 분말을 제조하고 1200$^{\circ}C$에서 열처리하여 Cu 첨가에 따른 입자변화와 전자파흡수 특성과의 관계를 조사하였다. Ni를 Cu로 0.1 mol 치환했을 때 까지는 포화자화 및 전자파흡수능이 치환하지 않았을 때와 거의 비슷하였으나, 그 이상 첨 가시는 직선적으로 감소하였다.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.177-182
• /
• 1992

The effect of heat-treatment temperature on the microwave absorbing properties was investigated in Ni0.8Zn0.2Fe2O4 specimens. The composite specimens were prepared by modling and curing the mixture of prereacted ferrite powder and silicone rubber. The measurement of complex permeability and permittivity was made by the reflection/transmission method. The most sensitive material constants with heat-treatment temperature is the imaginary (loss) component of permeability. The higher the heat-treatment temperature, the greater the magnetic loss. The composite specimens with high magnetic loss exhibited superior microwave absorbing properties. The quantitative estimation of microwave absorbing properties were made by plotting the observed material constants on the calculated solution map of impedance-matching.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1478-1480
• /
• 1994

In this paper, the microwave absorption properties of two layered absorber were evaluated. The two layer absorber were composed of Ni-Zn ferrite/rubber absorber and Ferroxplana/rubber absorber. The most absorption properties condition were obtained when the transforming layer and absorbing layer were Ferroxplana/robber absorber and Ni -Zn ferrite/rubber absorber. respectivity. The optimal thickness of the transforming and the absorbing layer were 4(mm) and 1(mm), respective1y.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2004년도 13회 산화철워크샵
• /
• pp.3-11
• /
• 2004

NiO, ZnO 조성이 다른 Ni-Cu-Zn 페라이트의 손실 분석을 실시했다. 손실, Ph는 측정 온도의 상승에 따라 감소 해 $100-120^{\circ}C$ 근처에서 일정한 값을 얻었다. Pcv 의 주파수의존성은 $Pcv\~f^n$ 로 표현될 수 있는데, n는 1 MHz 까지 일정했다. Pcv 는 ZnO/NiO 비가 증가함에 따라 감소한다. Pcv 를 Hysteresis loss, Ph 및 잔류손실, (Pcv-Ph)로 분리했다. Pcv 의 온도특성 및 조성 의존성은 Ph에 기인하지만, (Pcv-Ph)는 온도 및 조성에 의존하지 않는다 Ph 와 초투자률, ${\mu}$i의 온도 및 조성 의존성을 분석 해, 다음과 같은 식이 성립된다는 것을 알 수 있었다. $${\mu}\;_i{\mu}\;_o=I_s\;^2/(K_1+b{\sigma}\;_o{\lambda}\;_s)\;\;\;\;(1)$$ $$Wh=13.5(I_s\;^2/{\mu}\;i{\mu}\;0)\;\;\;\;(2)$$ 여기서, ${\mu}\;_o$ 은 진공의 투자율, $I_s$, 는 포화자화, $K_1$는 이방성상수, ${\sigma}_\;o$는 내부 불균일 응력, ${\lambda}_\;s$ 는 자기이방성 상수,b는 미지의 정수, Wh는 1 주기 당의 히스테리시스 손실(Ph=Wh*f)이다. Ni-Cu-Zn 페라이트의 Steinmetz 정수 m=1.64-2.2는 Mn-Zn 페라이트보다는 적은데, 이는 양 재료간의 손실 메커니즘의 차가 있음을 암시하는 것이다.