• 신재생에너지
• /
• 제4권1호
• /
• pp.11-18
• /
• 2008

In-situ lithiated NiO has been manufactured as a conventional cathode material of molten carbonate fuel cell (MCFC), however this material has a weakness for commercialization of MCFC because NiO is spontaneously dissolved into the electrolyte under MCFC operating conditions, resulting in short circuit between cathode and anode. In this research, therefore, $Co(OH)_2$-coated Ni powder was prepared by precipitation method with controlling pH at low temperature and atmospheric pressure. Modified cathode was fabricated by a conventional tape casting method and sintered at 700$^{\circ}C$ in a $H_2/N_2$ atmosphere, Based on characterization result, Pore size distribution and porosity was suitable for the cathode of MCFC. According to the result of dissolution, Ni solubility of modified cathode was 33% lower than that of conventional cathode. In addition, modified electrode showed a good performance from the single cell operation.

• 대한화학회지
• /
• 제66권6호
• /
• pp.451-458
• /
• 2022

LiNi_xMn_yCo_1-(x+y)O₂의 자기특성을 고려한 자기장 이용 결정방향 제어 연구를 통해, LiNi_0.6Mn_0.2Co_0.2O₂ 결정 내 많은 비율의 (00l) plane들이 전극집전체 표면에 수직으로 정렬된 결정배향 전극을 확보하였다. 해당 결정배향 전극은 리튬이차전지의 충방전 과정 중에 낮은 전극 polarization 특성을 나타내었으며, 일반 LiNi_0.6Mn_0.2Co_0.2O₂ 전극 대비 높은 용량을 기록하였다. 결정 배향 전극은 빠른 리튬이온 전달에 적합한 구조적 특성으로 인해 리튬이차전지 성능 향상에 기여한 것으로 예상되었다. 결정배향 전극에 의한 성능 향상을 다양한 전기화학적 이론 및 분석 결과를 통해 검증, 해석하였다.

• 한국수소및신에너지학회논문집
• /
• 제8권2호
• /
• pp.51-56
• /
• 1997

Laves상 $ZrV_2$합금은 다량의 수소를 저장하지만 수소와의 결합력이 강하여 Ni-MH전지의 전극으로는 부적당하다. 전극에 응용하기 위해 $ZrV_2$합금중의 V의 일부를 Ni로 치환하여 수소와의 결합력을 약하게 하였다. 이와 같은 Zr-V-Ni계 합금에 대해 전기화학적 성질, 전극의 평형전위로부터 합금중의 수소의 열역학적성질 및 2차전지전극에의 응용가능성을 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.657-660
• /
• 2009

The surface of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ cathode particle was modified by lanthanum based oxide to improve electrochemical property and thermal stability. The XRD pattern of surface layer was indexed with that of $La_4NiLiO_8$. The discharge capacity of modified electrode was higher than that of pristine sample, specially at fast charge-discharge rate and high cut-off voltage. In the DSC profile of the charged sample, the generation of heat by exothermic reaction was decreased by surface modification. Such enhancement may by attributed to the presence of stable lanthanum based oxide, which effectively suppressd the reaction between electrode and electrolyte on the surface of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ electrode.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.23-32
• /
• 2020

The intermittent characteristics of renewable energy complicates the process of balancing supply with demand. Electrolysis technology can provide flexibility to grid management by converting electricity to hydrogen. Alkaline electrolysis has been recognized as established technology and utilized in industry for over 100 years. However, high overpotential of oxygen evolution reaction in alkaline water electrolysis reduces the overall efficiency and therefore requires the development of anode catalyst. In this study, Raney Ni-Zn-Fe electrode was prepared by electroplating and the electrode characteristics was studied by varying electroplating parameters like electrodeposition time, current density and substrate. The prepared Raney Ni-Zn-Fe electrode was electrochemically evaluated using linear sweep voltammetry. Physical and chemical analysis were conducted by scanning electron microscope, energy dispersive spectrometer, and X-ray diffraction. The plating time did not changed the morphology and composition of the electrode surface and showed a little effect on overpotential reduction. As the plating current density increased, Fe content on the surface increased and cauliflower-like structure appeared on the electrode surface. In particular, the overpotential of the electrode, which was prepared at the plating current density of 320 mA/㎠, has showed the lowest value of 268 mV at 50 mA/㎠. There was no distinguishable overpotential difference between the type of substrate for the electrodes prepared at 80 mA/㎠.

• 센서학회지
• /
• 제24권4호
• /
• pp.224-227
• /
• 2015

In this study, 2 wt% Cr-doped Ni thin films were deposited using DC sputtering on a bare Si substrate using a 4 inch target at room temperature. In order to obtain ultrathin films from Cr-doped Ni thin films with high electrical properties and uniform surface, the micro-structure and electrical properties were investigated as a function of deposition time. For all deposition times, the Cr-doped Ni thin films had low average resistivity and small surface roughness. However, the resistivity of the Cr-doped Ni thin films at various ranges showed large differences for deposition times below 90 s. From the results, 120 s is considered as the appropriate deposition time for Cr-doped Ni thin films to obtain the lowest resistivity, a low surface roughness, and a small difference of resistivity. The Cr-doped Ni thin films are prospective materials for microdevices as ultrathin film electrodes.

• 환경위생공학
• /
• 제16권2호
• /
• pp.47-55
• /
• 2001

We investigated to find the optimum operation condition of electrolysis which have an influence on removal efficiency of heavy metals. When we experimented the testing wastewaters containing each 250mg/L of Cu and Ni ions, we got the variables like as pH, amount of electrolyte(NaCl), different species of electrode, electrode gap, electric strength, the number of electrodes, after fastening positive electrode plate with Al, Fe, Ti and negative electrode plate with Stainless Steel plate.

• 전기화학회지
• /
• 제3권2호
• /
• pp.121-126
• /
• 2000

[ $AB_5$ ] 수소저장합금인 $LaNi_5$, 합금분말에 Ni 및 Cu 무전해 도금의 영향을 전기 화학적 실험을 통하여 고찰하였다. 전기 화학적 실험은 정전류 충$\cdot$방전 실험, 순환전류전위 실험, 교류 임피던스 실험 등을 실시하여 도금하지 않은 $LaNi_5$ 전극과 Ni 및 Cu 무전해 도금한 전극간의 특성을 비교 연구하였다. 현상학적인 분석으로는 SEM을 이용하여 분말상의 미세조직을 관찰하였으며 X-선 회절시험을 실시하였다 무전해 도금을 실시하여 Ni 및 Cu박막이 피복된 수소저장 합금은 활성화 특성파 싸이클 수명 등의 특성이 개선되었으며 도금하지 않은 전극에 비하여 반응속도가 증가하였다. 또한 충$\cdot$방전이 반복됨에 따라 전극과 전해질 계면에서의 전하이동저항이 현저하게 감소하였다. 따라서 본 연구에서 실시한 $LaNi_5$, 활물질에 Ni및 Cu 무전해 도금을 실시하면 초기 활성화반응을 촉진시키며 $LaNi_5$활물질이 전해질과의 직접 접촉을 피하게 되어 전극의 수명을 증가시키는 것을 알 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제29권6호
• /
• pp.549-558
• /
• 2018

The overall efficiency depend on the overpotential of the oxygen evolution reaction in alkaline water electrolysis. Therefore, it is necessary to research to reduce the oxygen evolution overpotential of electrodes. In this study, Ni-Zn-Fe electrodes were prepared by electroplating and the surface area was increased by Zn leaching process. Electroplating variables were studied to optimize the plating parameters(electroplating current density, pH value of electroplating solution, Ni/Fe content ratio). Ni-Zn-Fe electrode, which is electroplated in a modified Watts bath, showed 0.294 V of overpotential at $0.1A/cm^2$. That result is better than that of Ni and Ni-Zn plated electrodes. As the electroplating current density of the Ni-Zn-Fe electrode increased, the particle size tended to increase and the overpotential of oxygen evolution reaction decreased. As reducing pH of electroplating solution from 4 to 2, Fe content in electrode and activity of oxygen evolution reaction decreased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.641-643
• /
• 2003

The ferroelectric properties of PZT(53/47) thin film was investigated by methoxy enthanol solution based on sol-gel method. The thickness of each layer by spincoating 0.25M sol at one time was $0.1{\mu}m$ and crack-free film was formed. $LaNiO_3/Si(100)$ electrode and $Pt/Ti/SiO_2/Si(100)$ electrode was coated by PZT sol at several times. PZT orientation was confirmed as a method of XRD and coercive field(Ec) as well as remnant polarization(Pr) was investigated from hysterisis curve. As a result of XRD analysis, we can know that the orientation of on PZT/LNO/Si(100) is better than on $Pt/Ti/SiO_2/Si(100)$. The remnant polarization(Pr) in LNO electrode was $87.5{\mu}C/cm^2$ and $39.8{\mu}C/cm^2$ in Pt. From this figures, it is investigated that the Pr in LNO electrode was better than in Pt.