• 제목/요약/키워드: Ni mesh

검색결과 44건 처리시간 0.026초

수피(樹皮)에 의(依)한 중금속(重金屬) 흡착효과(吸着效果) I. 수피(樹皮)를 이용(利用)한 폐수(廢水)중 $Fe^{++}$$Ni^{++}$의 제거(除去) 효과(效果) (The Effects of Bark on Heavy Metal Adsorption I. The Effects of Pine and Oak Barks on Adsorption of $Fe^{++}$ and $Ni^{++}$ in Wastewater)

  • 김경직;백기현
    • 한국환경농학회지
    • /
    • 제5권1호
    • /
    • pp.55-60
    • /
    • 1986
  • 본(本) 연구(硏究)는 소나무 수피(樹皮)와 신갈나무 수피(樹皮)가 중금속(重金屬)이온들을 흡착(吸着)하는데 영향(影響)하는 물리적(物理的)${\cdot}$화학적(化學的) 인자(因子)를 구명(究明)하기 위한 목적(目的)으로 수행(遂行)되었다, 본(本) 연구(硏究)에서 얻은 결과(硏究)를 요약(要約)하면 다음과 같다. 1. 두 수종(樹種) 공(共)히 수피립자(樹皮粒子)가 작을수록 흡착율(吸着率)이 증가(增加)한다. 동일(同一)한 mesh에서 $Fe^{++}$$Ni^{++}$의 흡착(吸着)은 신갈나무 수피(樹皮)가 량호(良好)하였다. 2. 두 수종(樹種) 공(共)히 미처리수피(未處理樹皮)의 흡착효과(吸着效果)가 HCHO처리수피(處理樹皮)보다 동일(同一)하거나, 약(約) 5% 높게 나타났다. 그러나, 수피(樹皮)에서 류출(流出)되는 색(色)의 농도(濃度)가 소나무 수피(樹皮)는 5.8배(培), 신갈나무 수피(樹皮)는 11.8배(培) 정도 미처리수피(未處理樹皮)의 여과수(濾過水)가 높았다. 3. $Fe^{++}$$Ni^{++}$은 30분(分)동안 반응(反應)할 때 최대흡착(最大吸着)을 나타내며, 그 이상(以上) 반응(反應)시켜도 흡착량(吸着量)의 변화(變化)는 거의 없었다. 4. 중김속(重金屬) 용액(溶液)의 농도(濃度)가 증가(增加)함에 따라 총흡착량(總吸着量)은 증가(增加)하나, 흡착율(吸着率)은 감소(減少)한다. 5. $Fe^{++}$은 수피(樹皮)와 반응(反應)한 후(後)의 여과액의 pH가 $4{\sim}5$, $Ni^{++}$은 pH $3.6{\sim}4.0$에서 최대흡착(最大吸着)을 나타냈다. 6. 수종(樹種)과 중금속(重金屬)에 관계(關係)없이 수피량(樹皮量)이 많을수록 높은 흡착율(吸着率)을 나타내고 있다. 그러나 단위(單位)무게당(當) 흡착량(吸着量)은 수피(樹皮) 2g 사용(使用)시가 가장 경제적(經濟的)이며 $Fe^{++}$는 신갈나무에서 36mg/1g, 소나무에서 21mg/g이 흡착(吸着)되었으며, $Ni^{++}$은 9mg/1g과 7mg/1g이 각각(各各) 흡착(吸着)되었다.

  • PDF

다층 소결메쉬 확산체를 이용한 알칼라인 수전해 셀 (Multi-Layered Sintered Porous Transport Layers in Alkaline Water Electrolysis)

  • 염상호;윤영화;최승욱;권지희;이세찬;이재훈;이창수;김민중;김상경;엄석기;김창희;조원철;조현석
    • 한국수소및신에너지학회논문집
    • /
    • 제32권6호
    • /
    • pp.442-454
    • /
    • 2021
  • The porous transport layer (PTL) is essential to effectively remove oxygen and hydrogen gas from the electrode surface at high current density operation conditions. In this study, the effect of PTL with different characteristics such as pore size, pore gradient, interfacial coating was investigated by multi-layered sintered mesh. A water electrolysis single cell of active area of the 34.56 cm2 was constructed, and IV performance and impedance analysis were conducted in the range of 0 to 2.0 A/cm2. It was confirmed that the multi-layered sintered mesh PTL, which have an average pore size of 25 to 57 ㎛ and a larger pore gradient, removed bubbles effectively and thus seemed to improve IV performance. Also, it was confirmed that the catalytic metals such as Ni, NiMo coating on the PTL reduced activation overpotential, but increased mass transport overpotential.

수소저항합금을 이용한 150ℓ급 수소저장용기의 제작과 특성에 관한 연구 (Fabrication and Characteristics of 150ℓ Class Hydrogen Tank Using Hydrogen Storage Alloy)

  • 강길구;강세선;권호영;이임렬
    • 한국수소및신에너지학회논문집
    • /
    • 제13권2호
    • /
    • pp.110-118
    • /
    • 2002
  • The hydrogen storage vessel having a good heat conductivity along with a simple structure and a low cost for these alloys was designed and manufactured, and then its characteristic properties were studied in this study. The various parts in hydrogen storage vessel consisted of copper pipes and stainless steel of 250 mesh reached the setting temperature after 4~5 minutes, which indicated that storage vessel had a good heat conductivity that was required in application. And also the storage vessel had a good property of hydrogen transport considering that the reaction time between hydrogen and rare-earth metal alloys in storage vessel was found to be within 10 min at $18^{\circ}C$ under 10 atmospheric pressure. It showed that the average capacity of discharged hydrogen volume was found to be $120{\ell}$ for $MmNi_{4.5}Mn_{0.5}$ under discharging conditions of $40^{\circ}C{\sim}80^{\circ}C$ at a constant flow rate of $5{\ell}$/min. It was found that the optimum discharging temperature for obtaining an appropriate pressure of 3atm was determined to be $60^{\circ}C$ for $MmNi_{4.5}Mn_{0.5}$ hydrogen storage alloy.

An hp-angular adaptivity with the discrete ordinates method for Boltzmann transport equation

  • Ni Dai;Bin Zhang;Xinyu Wang;Daogang Lu;Yixue Chen
    • Nuclear Engineering and Technology
    • /
    • 제55권2호
    • /
    • pp.769-779
    • /
    • 2023
  • This paper describes an hp-angular adaptivity algorithm in the discrete ordinates method for Boltzmann transport applications with strong angular effects. This adaptivity uses discontinuous finite element quadrature sets with different degrees, which updates both angular mesh and the degree of the underlying discontinuous finite element basis functions, allowing different angular local refinement to be applied in space. The regular and goal-based error metrics are considered in this algorithm to locate some regions to be refined. A mapping algorithm derived by moment conservation is developed to pass the angular solution between spatial regions with different quadrature sets. The proposed method is applied to some test problems that demonstrate the ability of this hp-angular adaptivity to resolve complex fluxes with relatively few angular unknowns. Results illustrate that a reduction to approximately 1/50 in quadrature ordinates for a given accuracy compared with uniform angular discretization. This method therefore offers a highly efficient angular adaptivity for investigating difficult particle transport problems.

영국(英國)콘웰주(州)의 성(聖)오우스텔 화강암괴(花崗岩塊)에 대(對)한 지구화학적(地球化學的) 연구(硏究) (The Significance of the Distribution Patterns of Certain Elements in the Stream Sediments' of the St. Austell Granite Mass, Cornwall)

  • 이재영
    • 자원환경지질
    • /
    • 제2권4호
    • /
    • pp.23-71
    • /
    • 1969
  • 성(聖) 오-스텔화강암괴(花崗岩塊)를 연구대상(硏究對象)으로하여 본(本) 지역(地域)에 발달(發達)한 주요하천(主要河川)에서 각각(各各) 약(約) 1/2mile 간격(間隔)마다 표사(漂砂)를 채취(採取)하여 이를 건조(乾操)하고 80mesh (B.S.S. 단위(單位))채에 통과(通過)시켜 입도(粒度)가 -80#에 해당(該當)하는 시료(試料)만을 분석시료(分析試料)로써 Na, K, Li, P, Ni, Cr, Sn, W, As, Cu, Zn, Pb의 함량(含量)을 분석(分析)하였다. 본연구(本硏究)의 목적(目的)은 상기(上記)한 수개(數個)의 화학원소(化學元素)가 보이는 지구화학적(地球化學的) 분포형(分布型)을 검토(檢討)하고 관입순서(貫入順序)가 다른 본화강암괴(本花崗岩塊)의 수개(數個)의 상(相)과 광화작용(鑛化作用)을 비교연구(比較硏究)하는데 있었다. 연구(硏究)의 결과(結果)는 본화강암(本花崗岩)이 2개(個)의 주관입화강암(主貫入花崗岩)으로 구성(構成)되어 있다는 Exley 씨(氏)의 연구(硏究)와 일치(一致)하였다. 즉본화강암괴는 전기(前期)의 화강암(花崗岩)이 본지역(本地域)의 서부(西部)에서 후기(後期)의 관입화강암(貫入花崗岩)에 의(依)하여 접촉(接觸)되어 있다. 본연구중(本硏究中) grid deviation에 의(依)한 방법(方法)은 본화강암괴(本花崗岩塊)의 성질(性質)에 관(關)한 지화학적(地化學的) 자료(資料)를 얻는데 매우 유용(有用)하였으나 frequency diagram은 현저(顯著)한 도움이 되지 못하였다. 기존광맥(旣存鑛脈)이 발달(發達)하여 있는 지역(地域)의 하천(河川)은 거의 모두가 이상치(異常値)를 나다냈는데 이것은 과거(過去)의 광산작업시(鑛山作業時) 유입(流入) 되여온 tailing에 기인(基因)된것으로 결론(結論)되었다.

  • PDF

염수 전해용 가스확산 전극에 관한 연구 (Research on the Gas Diffusion Electrode for the Brine Electrolysis)

  • 이동호;이광현;한정우;임정택;이오상;이재도
    • 전기화학회지
    • /
    • 제5권1호
    • /
    • pp.7-12
    • /
    • 2002
  • 염수 전해 공정에서 산소음극형 가스화산전극의 적용에 대해 연구, 조사하였다. 가스확산전극은 반응층, 가스확산층, 급 전체로 구성된다. 반응층은 친수성 카본블랙, 소수성 카본블랙, PTFE(polytetrafluoroethylene), 은거울반응이나 함침법에 의해 담지된 은 촉매로 제조하였다. 가스확산충은 소수성 카본블랙과 PTFE로 제조되며, 반응층 내에 사용되는 급전체는 Ni망을 사용하였다. 실험에 의하면 함침법에 의해 Ag촉매를 반응충 카본에 담지시켜 제작된 전극$(Ag\;10wt\%$,바인더 $20wt\%)$이 산소음극 과전압이 약 700mv, 전해조에 장착하여 측정한 전해전압(전해 조건이 $80^{\circ}C,\;32wt\%$ 가성소다 그리고 $300 mA/cm^2$의 전류 밀도)이 약 2.2V로 가장 우수한 결과를 나타내었다. 이는 기존 공정의 전해전압 3.4V에 비해 $30\%$이상 저감된 결과이다. 또한 개발된 가스확산 전극은 염수 분해용 전해 공정에서 3개월 연속 운전이 가능하였다.

대구지역 축적먼지 중 미량원소성분의 시설별 및 지역별 농도분포 (Characteristics of Trace Element Concentrations in Dust by Facilities and Areas in Daegu, Korea)

  • 송희봉;도화석;곽진희;김종우;강재형;피영규
    • 대한환경공학회지
    • /
    • 제32권3호
    • /
    • pp.287-295
    • /
    • 2010
  • 대구광역시의 도로, 학교, 지하역사, 주택 등을 대상으로 축적먼지를 채취하여 100 ${\mu}m$ 이하로 걸러서 산추출한 후 ICP로 14개 원소를 분석하였다. 미량원소성분 중 Ca, Fe, K, Mg, Mn, Na, V는 자연적인 발생원의 영향을 받고, Cd, Cr, Cu, Ni, Pb, Zn은 인위적인 발생원의 영향을 받고 있는 것으로 추정되었다. 미량원소성분의 농도는 자연적인 발생원 성분이 인위적인 발생원 성분보다 매우 높은 수준을 보였다. 특히 학교는 Ca과 Pb의 농도가 높았고, 지하역사는 Cu와 Zn의 농도가 높았다. 미량원소성분의 조성백분율은 실내인 지하역사 주택 학교가 실외인 도로보다 인위적인 발생원 성분을 많이 함유하였다. 또한 유해중금속성분의 오염도는 학교 주택 지하역사가 도로보다 높았고, 도시지역이 농촌지역보다 높은 전형적인 경향을 보였다. 미량원소성분간의 상관성은 흙먼지나 도로의 재비산먼지관련 성분간에 양호하였고, 폐기물소각이나 연료연소관련 성분간에도 양호하였다.

대형유통업소주차장의 축적먼지 중 미량원소성분 분석과 오염원 평가 (Trace Element Analysis and Source Assessment of Parking Lot Dust in Large Shopping Mall)

  • 송희봉;안정임;정연욱;윤호석;금종록;도화석;김선숙;김종우
    • 대한환경공학회지
    • /
    • 제34권3호
    • /
    • pp.168-176
    • /
    • 2012
  • 2011년 3월에 대구광역시의 대형유통업소주차장을 대상으로 총 48개의 먼지시료를 채취하여 100 ${\mu}m$ 이하로 걸러서 산추출한 후 ICP로 14개 원소를 분석하였다. 미량원소성분 중 Ca, Fe, K, Mg, Mn, Na, V는 자연적 발생원의 영향을, 그리고 Cd, Cr, Cu, Ni, Pb, Zn은 인위적 발생원의 영향을 받는 것으로 추정된다. 미량원소성분의 농도는 자연적 발생원 성분이 인위적 발생원 성분보다 뚜렷하게 높았고, 인위적 발생원 성분은 지상옥상이 지상실내와 지하실내보다 농도가 높았다. 미량원소성분의 조성백분율은 인위적 발생원 성분에 비해 자연적 발생원 성분이 대부분을 차지하였고, 인위적 발생원 성분은 지상옥상이 지상실내와 지하실내보다 함유율이 높았다. 주차장은 유해중금속오염이 거의 없는 수준을 보였고, 지상옥상은 지상실내와 지하실내보다 중금속오염도가 높았다. 미량원소성분간의 상관성은 지상옥상이 지상실내와 지하실내보다 양호한 상관성이 많았고, 인위적 발생원 성분은 주차장연수와 주차밀도와도 상관성이 양호하였다.

En-masse retraction with a preformed nickel-titanium and stainless steel archwire assembly and temporary skeletal anchorage devices without posterior bonding

  • Jee, Jeong-Hyun;Ahn, Hyo-Won;Seo, Kyung-Won;Kim, Seong-Hun;Kook, Yoon-Ah;Chung, Kyu-Rhim;Nelson, Gerald
    • 대한치과교정학회지
    • /
    • 제44권5호
    • /
    • pp.236-245
    • /
    • 2014
  • Objective: To evaluate the therapeutic effects of a preformed assembly of nickel-titanium (NiTi) and stainless steel (SS) archwires (preformed C-wire) combined with temporary skeletal anchorage devices (TSADs) as the sole source of anchorage and to compare these effects with those of a SS version of C-wire (conventional C-wire) for en-masse retraction. Methods: Thirty-one adult female patients with skeletal Class I or II dentoalveolar protrusion, mild-to-moderate anterior crowding (3.0-6.0 mm), and stable Class I posterior occlusion were divided into conventional (n = 15) and preformed (n = 16) C-wire groups. All subjects underwent first premolar extractions and en-masse retraction with preadjusted edgewise anterior brackets, the assigned C-wire, and maxillary C-tubes or C-implants; bonded mesh-tube appliances were used in the mandibular dentition. Differences in pretreatment and post-retraction measurements of skeletal, dental, and soft-tissue cephalometric variables were statistically analyzed. Results: Both groups showed full retraction of the maxillary anterior teeth by controlled tipping and space closure without altered posterior occlusion. However, the preformed C-wire group had a shorter retraction period (by 3.2 months). Furthermore, the maxillary molars in this group showed no significant mesialization, mesial tipping, or extrusion; some mesialization and mesial tipping occurred in the conventional C-wire group. Conclusions: Preformed C-wires combined with maxillary TSADs enable simultaneous leveling and space closure from the beginning of the treatment without maxillary posterior bonding. This allows for faster treatment of dentoalveolar protrusion without unwanted side effects, when compared with conventional C-wire, evidencing its clinical expediency.

한국산 灰重石鑛의 광물학적, 지화학적 연구 및 그의 探査에의 이용 (The Mineralogical and Geochemical Study on Korean Scheelites and its Application to the Ore Prospecting)

  • So, Chil-Sup;Park, Maeng-Eon
    • 자원환경지질
    • /
    • 제12권2호
    • /
    • pp.79-93
    • /
    • 1979
  • 한반도 내에 부존되고 있는 중적광상들은 세 주요한 Metallousenetic Epoch (Pre-Cambrian E., Jurassic-early Cretaceous E., 및 late Cretaceous-early Tertiary E.)에 생성되었고 성인으로 열수작용과 접촉교대작용에 기인된다고 보고되었다. 이중 12개 광상(달성, 산내, 일광, 상동, 대화, 월악, 복수, 옥방, 쌍전, 홍성, 삼봉, 청양)을 본 연구의 대상으로 택하고 각 지역에서 채취한 표품중 모두 25개 시료에 대하여 지화학적 실험을 수행하였다. 즉 각 분쇄된 시료 (-80+120mesh)는 super panner, 중액, isodynamic separator, UV lamp를 이용한 물리적인 처리과정을 거쳐 최종으로 입체현미경 하에서 단체분리된 후 Jarrell-Ash 1.5m Grating Spectrometer를 이용하여 본 연구대상 시료로 개발한 Spectrochemical method (Carrier: NaCl, Internal standard: $La_2O_3$)로 정량 분석되었다. 본 연구에서 밝혀낸 국내 회중석 광내에 함유되는 희유 윈소의 종류는 모두 Al, Bi, Fe, Si, Mn, Pb, Mg, Sn, Mo, Cu, Sr, Cr, Y, Ag, Ti, Ni, As, Yb의 18개 원소이며, 이들은 각각의 절대적 및 상대적인 함량과 각 광화작용의 시기, 광상의 성인, 모암, 각 원소의 mobility 그리고 회중석광의 형광색 및 육안색과 비교 검토되었다. 본 연구의 결과로 회중석광이 정출되는 과정에서 유사한 지질환경의 물리화학적인 여건이 이루어지면 그 내에 함유되는 몇 성분원소들의 화학적인 특성은 매우 유사성을 보여주는 typochemical habit를 가짐을 알 수 있었다. 본 연구에서 밝혀진 한국산 회중석 광내의 희유성분(稀有成分)으로서 Y, Mn, Sr 원소들의 Geochemical mobility의 특성(特性)은 앞으로 회중석광의 심도탐광을 위하여 고려되어야하고, 더욱 연구개발되어야 할 것이다. 또한 상기 회중석 광내의 물리적 및 화학적으로 결합되어 있는 불순물의 희유성분들은 선광 제련 파정에서 금속성분의 추출농집공정(工程)에 유용한 자료가 될 것이다.

  • PDF