• 연구논문집
• /
• 통권33호
• /
• pp.183-190
• /
• 2003

Today, We have used many electronic equipment such as computer, TV, cellular phone and so on. These equipment radiate a large amount of EMI(Electromagnetic interference) which is occurred trouble of airplane, medical equipment, communicate equipment, and especially, human health. So, Ni mesh fabrication for EMI shielding by continuous electroforming process was investigated. Continuous electroforming apparatus was made by means of rotating cathode drum. And We investigated the characteristics of two types of Ni electroforming solution. One was made by laboratory and the other was produced by M cooperation. The grain size increased with increasing current density and bath temperature, and decreasing rotating speed of cathode drum. EDX results indicate that the Ni mesh electroformed by the KIMM solution is composed of pure Ni. But the Ni mesh electroformed by the M cooperation solution has Ni and S element. The incorporation of S element in the Ni mesh has a profoundly effect on mechanical properties such as hardness, internal stress and so on.

• 한국산업보건학회지
• /
• 제1권1호
• /
• pp.82-88
• /
• 1991

Determination of Cu, Fe, Ni, Pb, and Zn concentrations in coal and respirable coal dust were performed by atomic absorption spectrophotometry. The coal samples of 18 coal mines in Gangneung area were collected and 25 coal mines in Taebaek area. Crushed coal samples were divided into three mesh sizes. The results were as follows : 1. Metal concentrations of coals in Gangneung area by sieve sizes( -100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 20, 18, 19, Fe ; 1,830, 1,765, 1,107, Pb ; 6, 8, 14, Ni ; 17, 17, 14, Zn ; 4, 2, $4{\mu}g/g$, respectively. Metal concentrations in coals in Taebaek area by sieve sizes(-100/+200 mesh, -200/+325 mesh, -325 mesh) were as follows: Cu ; 30, 32, 26, Fe ; 1,741, 1,822, 1,773, Pb ; 8, 9, 7, Ni ; 13, 13, 13, Zn ; 8, 5, $4{\mu}g/g$, respectively. There were not significant differences of Cu, Fe, Ni, Pb, and Zn concentrations of coals statistically in Gangneung and Taebaek area by sieve size. 2. Metal concentrations of coals in Gangneung and Taeback area were as follows : Cu ; 19, 30, Fe ; 1,514, 1,778, Pb ; 9, 8, Ni ; 16, 13, Zn ; 3, $6{\mu}g/g$, respectively. Differences of copper and zinc concentrations of coal samples were significant between Gangneung and Taebaek area, but those of iron, nickel and lead concentrations were not significant. 3. Copper, iron, lead, nickel and zinc concentrations of coals and respirable coal dust were as follows : Cu ; 30, 6, Fe ; 1,779, 5,075, Pb ; 8, 7,814, Ni ; 13, 5,681, Zn ; 5, $134{\mu}g/g$, respectively. Differences of nickel, lead and zinc concentrations were significant between coals and respirable coal dust but those of copper and iron concentrations were not significant.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.101-101
• /
• 2003

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.36-42
• /
• 2020

Silver nanowire (AgNW) random-meshes with high transmittance, low sheet resistance, and high oxidation stability and flexibility were fabricated using solution-based processes. The random-mesh structure was obtained by forming bubbles whose sizes and densities were controlled using a corona treatment of polyethylene terephthalate (PET) substrates. To reduce the sheet resistance of the fabricated AgNW electrode, a washing process using ethanol solution was performed. In addition, nickel (Ni) was coated on AgNW to improve resistance to oxidation. The effects of corona treatment and Ni-coating on the transmittance, sheet resistance, oxidation stability, and flexibility of the AgNW electrodes were investigated.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.171-171
• /
• 2016

Metal mesh는 ITO를 대체한 물질의 85%를 차지하는 신소재로서 저비용 고전도도를 갖고 있어 그 활용도가 높으며, Metal mesh를 활용한 투명 LED 디스플레이는 기존 ITO 투명 디스플레이보다 유지보수가 용이하고, 자원절약뿐만 아니라 경제적이다. 따라서 본 연구는 Metal mesh가 경제적인 활용 및 시장 확대가 가능할 수 있도록 연구하는데 목적이 있다. 본 연구는 Metal mesh를 공정 상 더 쉽게 생산 가능하게 하는 Metal master를 제작하였다. 마스터의 제작 시 문제가 되는 경도를 해결하기 위해 도금액을 개발하여 적용시켰고 노광시간, 선폭, 현상시간의 조절을 통해 상호간의 영향 관계를 규명하고 최적조건을 찾아 Photolithography공정에 적용하였다. 또한 미세패턴 형성의 최적조건을 찾고 니켈 전기도금을 진행하였다. Metal mesh의 문제점인 Visibility, Moire 현상을 해결하기 위해 Metal master의 선폭을 $2.5{\mu}m$까지 낮췄으며, 그 결과, 선폭 $2.5{\mu}m$, 깊이 $8{\mu}m$, 두께 $100{\mu}m$의 Ni master를 제작하였다. 이 마스터를 이용하여 도금부터 전사하는 단계까지 도금공정의 전반적인 내용을 다루었다.

• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.224-232
• /
• 2004

Ni-diamond composite powders with nickel layer of round-top type on the surface of synthetic diamond (140/170 mesh) were prepared by the electroless plating method (EN) with semi-batch reactor. The effects of nickel concentration, feeding rates of reductant, temperature, reaction time and stirring speeds on the weight percentage and morphology of deposited Ni, mean particle size and specific surface area of the composite powders were investigated by Atomic Adsortion Spectrometer, SEM-EDX, PSA and BET. It was found that nucleated Ni-P islands, acted as catalytic sites for further deposition and grown into these relatively thick layers with nodule-type on the surface of diamond by a lateral growth mechanism. The weight percentage of Ni in the composite powder increased with reaction time, feeding rate of reductant and temperature, but decreased with stirring speed. The weight percentage of Ni in Ni-diamond composite powder was 55% at 150 min., 200 rpm and 7$0^{\circ}C$ .

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.93-100
• /
• 2002

To better understand the codeposition mechanism of phosphorous, surface pH and potential of cathode were measured during electrodeposition of Ni-P alloys. The pH of cathode surface was measured using a flat-bottom glass pH electrode and a 500 mesh gold gauze as cathode. The cathode surface pH was increased with increasing the current density and always higher than the pH in the bulk solution. As a result of overplotting the surface pH and cathode potential on the Pourbaix diagram, it was found that cathode surface shift to the domain of predominant of $H_2$$PO3$-or $H_2$$PO_2$-. Additionally, new deposition mechanism was suggested that $H_2$ $PO_2$- and $H_2$$PO_3$- play important roles in the deposition reaction of Ni-P alloys.

• 자원환경지질
• /
• 제32권3호
• /
• pp.247-260
• /
• 1999

Geochermical characteristics of the fluvial sediments deprnding on particle size distribution size were investigated in the respect of majir, minor and rare eath element chemisitry. Ratios of $Al_{2}O_{3}/Na_{2}O$ and $K_{2}O/Na_{2}O$ of the sediments show the homogeneous valus, and partly positive correlation with $SiO_{2}/Al_{2}O_{3}$, respecively. Characteristics of minor element ratios (V/Ni, Cr/V, Ni/Co and Zr/Hf)are within the lower and narrow range. Thesesuggested that sediment sources may be acidic to intermediate granitic rock, and may be explained by simple weathering and sedimentation. With increasing SiO2 contents, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO and MgO decreased, but those of $K_{2}O$ and $Na_{2}O$ increased, Concentrations of Ba, Be, Cs, Cu, Li, Ni, Sr, V and Zr show comparatively normal negative and some positive trends. Compared with the mean composition of granite, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, MnO, CaO and MgO in the sediments of the study area were highly enriced. Among some minor and rare earth elements, concentrations of As, Cd, Cu, and V were enriched, but those of Be, Ce, Rb, Sc, Sr and Zn were depleted when compared with average composition of granite. By decreasing of particle size fractions, SiO2, Rb and Sr conterts decreased, but concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO, MgO, $TiO_{2}$, MgO, $P_{2}O_{5}$, Be, Cu, Hf, Pb, V and Zr increased. From the correlations between particle size fractions and element concenreations, some elements of $Fe_{2}O_{3}$, CaO, MgO, $P_{2}O_{5}$, Cu, Ni, Zn and Zr showed typical trends in the secondary contramination sediments. These trends are typically shown under 100 mesh fractions. It indicates that the fraction of minus 100 mesh is the optimum size fraction for geochemical and environmental survey.

• 방사성폐기물학회지
• /
• 제2권1호
• /
• pp.69-75
• /
• 2004

고리 1호기 원자로압력용기의 중성자속과 방사화생성물 재고량을 계산하기 위하여 DORT 코드와 ORIGEN2 코드를 사용하였다. DORT 코드를 이용해 중성자속을 계산하기 위하여 노심을 중앙부터 원자로압력용기까지 방위각 방향으로 94 mesh로 분할하였다. 원자로압력용기 영역의 중성자속을 이용하여 주요 핵종의 단면적을 재계산하였다. 원자로압력용기의 경우, $^{55}$Fe, $^{60}$Co, $^{59}$ Ni 및 $^{63}$ Ni의 핵종이 총 방사능의 약 95%를 차지하였으며, 해체 후 50년 이상 냉각후의 총 방사능은 정지시점과 비교하여 약 0.2% 이하로 감소하는 것으로 평가되었다. 총 중량이 210 ton인 원자로압력용기의 총 방사능은 5.25${\times}$$10^{6}$GBq이었다. ORIGEN2 계산 결과를 검증하기 위하여 고리 1호기 원자로압력용기의 계산값과 실측값에 대한 비교 검증을 수행하였으며, 그 결과는 서로 일치함을 확인할 수 있었다.

• 대한화학회지
• /
• 제24권5호
• /
• pp.361-370
• /
• 1980

용리액으로 염산과 숙신산 및 그들의 혼합액을 사용하고, 강산성 양이온 교환수지, Dowex 50W-x8, 100∼200 mesh 를 사용하여 금속, Mg(Ⅱ), Ca(Ⅱ), Sr(Ⅱ), Ba(Ⅱ), Cr(Ⅲ), Mn(Ⅱ), Fe(Ⅲ), Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), Cd(Ⅱ), Hg(Ⅱ) 및 Pb(Ⅱ)의 이온들에 대한 분포계수를 측정하였다. 분리도와 양이온의 전하와의 관계를 고찰하였고, 이온반지름에 따른 분포계수를 비교하였다. 특히 0.9M 염산용액에서 Fe(Ⅲ), Co(Ⅱ), Ni(Ⅱ)의 완전분리가 가능하였다.