• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.45.3-46
• /
• 2018

Oscillations in a sunspot are easily detected through the Doppler velocity observation. Although the sunspot oscillations look erratic, the wavelet analysis show that they consist of successive wave packets which have strong power near three or five minutes. Previous studies found that 3-min oscillation at the chromosphere is a visual pattern of upward propagating acoustic waves along the magnetic field lines. Resent multi-height observations help this like vertical study, however, we also focus on horizontal facet to extend three dimensional understand of sunspot waves. So, we investigate a fragmented sunspot expected to have complex wave profiles according to the positions in the sunspot observed by the Fast Imaging Solar Spectrograph. We choose 4 points at different umbral cores as sampling positions to determine coherence of oscillations. The sets of cross-correlation with three and five minutes bandpass filters during a single wave packet reveal interesting results. Na I line show weak correlations with some lags, but Fe I and Ni I have strong correlations with no phase difference over the sunspots. It is more remarkable at Ni I line with 3-min bandpass that all sets of cross-correlation look like the autocorrelation. We can interpret this as sunspot oscillations occur spontaneously over a sunspot at photosphere but not at chromosphere. It implies a larger or deeper origin of 3-min sunspot oscillation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.330-337
• /
• 2005

La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/-based solid electrolytes in which Mg site was partially substituted by Fe, Co or Ni (0.05, 0.1, 0.15 at.％) were fabricated by conventional solid-state reaction and their sintered densities were above 94％ of theoretical density. X-ray diffraction analysis and microstructure observation for the sintered specimens were performed. The ac complex impedance were measured at 400。C to l000。C in air and fitted with a Solatron ZView program. The electrical conductivity of La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/-based solid electrolytes substituted by Fe, Co or Ni was higher than that of pure La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/. The electrical conductivity of La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.05/Ni/sub 0.15/O/sub 3-δ/ electrolyte was 3.4×10/sup -2/ Scm/sup -1/ at 800。C and the highest value of the whole electrolytes.

• Korean Journal of Crystallography
• /
• v.10 no.1
• /
• pp.33-38
• /
• 1999

The complex [Ni(L2)(H2O)]Cl·H2O (1) (L2=3,14-dimethyl-2,6,13,17-tetraazartricyclo [14,4,01.18,07.12]docosane-N-acetic acid) has been synthesized and characterized by X-ray crystallography. 1 crystallizes in the triclinic system, space group P, with a=11.274(1), b=13.851(1), c=17.159(6) , α=90.24(2), β=101.10(2), γ=92.11(1)o V=2682.5(11) 3, Z=4, R1=0.042 and wR2=0.111 for 9432 observed reflections with [I>2σ(I)]. The central nicke(II) ion is six-coordinated octahedral geometry with bonds to the four amine nitrogen atoms the carboxylic oxygen atom of the macrocyclic ligand and to the water molecule occupying a position trans to the pendant arm.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.2
• /
• pp.57-62
• /
• 2012

In this report, we demonstrate that the longitudinal localized surface plasmon resonance mode can be suppressed when the nanorods were in dumbbell shape. The seed nanorods were synthesized by electrochemical deposition of metals into the pores of anodic aluminum oxide templates. The dumbbell-like nanorods were grown from seed Au-Ni-Au nanorods by a rate-controlled seed-mediated growth strategy. The selective deposition of Au atoms onto Au blocks of Au-Ni-Au nanorods produced larger diameter of Au nanorods with bumpy surface resulting in dumbbell-like nanorods. The morphology of nanorods depended on the reduction rate of $AuCl_4^-$, slow rate producing smooth surface of Au nanorods, but high reduction rate producing bumpy surface morphology. Through systematic investigation into the UV-Vis-NIR spectroscopy, we found that the multiple localized surface plasmon resonance (LSPR) modes were available from single-component Au nanorods. And, their LSPR modes of Au NRs with bumpy surface, compared to the smooth seed Au NRs, were red-shifted, which was obviously attributed to the increased electron oscillation pathways. While the longitudinal LSPR modes of smoothly grown Au NRs were blue-shifted except for a dipole transverse LSPR mode, which can be interpreted by decreased aspect ratio. In addition, dumbbell-like nanorods showed an almost disappeared longitudinal LSPR mode. It reflects that the plasmonic properties can be engineered using complex nanorods structure.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.522-531
• /
• 2006

This study has been conducted to evaluate the influence of ambient heavy metals to the air quality and to find their sources in Ulsan. Korea. The distribution characteristics of ambient heavy metals with wind direction were investigated by using pollution-rose diagram. Carcinogenic risk for five trace heavy metals (Pb. Cd, Cr, Mn, and Ni), which are classified to carcinogenic material by US EPA, are assessed according to the classification system of USEPA and WHO. According to pollution-rose calculation on pollutants sources, Pb and Cu in Deoksin, which is an adjacent to Onsan industrial complexes, were $0.1058\;and\;0.3242{\mu}g/m^3$. These concentration levels are the highest at all sampling sites. From this result we could confirm that it was affected by Onsan industrial complex that is located northeast of Deoksin.,And the maximum concentration of Cd, Cr, and Ni were $0.0306,\;0.0102,\;and\;0.0146\;{\mu}g/m^{3} in Yeocheon respectively. Because Yeocheon is in the Mipo industrial complexes, which have many combustors, incinerators, and manufacturing facilities compared to other regions. In carcinogenic risk assessment, Pb, Ni, and Mn concentration level at six sampling sites were lower than the risk level guideline values ($10^{-5}$) of WHO. However, $Cr^{6+}$ and Cd concentration in Yeocheon were 60% and 205% higher than the guideline values of WHO. Therefore it is very important that the emission from industrial complexes were carefully managed and controlled to improve air quality in residential area.

• Korean Journal of Materials Research
• /
• v.28 no.5
• /
• pp.295-300
• /
• 2018

Effects of annealing temperature on the microstructure and mechanical properties through thickness of a Cu-3.0Ni-0.7Si alloy processed by differential speed rolling are investigated in detail. The copper alloy with a thickness of 3 mm is rolled to a 50 % reduction at ambient temperature without lubricant and subsequently annealed for 0.5 h at $200-900^{\circ}C$. The microstructure of the copper alloy after annealing is different in the thickness direction depending on the amount of the shear and compressive strain introduced by the rolling; the recrystallization occurs first in the upper roll side and center regions which are largely shear-deformed. The complete recrystallization occurs at an annealing temperature of $800^{\circ}C$. The grain size after the complete recrystallization is finer than that of the conventional rolling. The hardness distribution of the specimens annealed at $500-700^{\circ}C$ is not uniform in the thickness direction due to partial recrystallization. This ununiformity of hardness corresponds well to the amount of shear strain in the thickness direction. The average hardness and ultimate tensile strength has the maximum values of 250 Hv and 450 Mpa, respectively, in the specimen annealed at $400^{\circ}C$. It is considered that the complex mode of strain introduced by rolling directly affects the microstructure and the mechanical properties of the annealed specimens.

• Corrosion Science and Technology
• /
• v.14 no.5
• /
• pp.239-246
• /
• 2015

Stainless steel is generally known to have characteristics of excellent corrosion resistance and durability, but in a marine environment it can suffer from localized corrosion due to the breakdown of passivity film due to chloride ion in seawater. Furthermore, the damage behaviors are sped up under a cavitation environment because of complex damage from electrochemical corrosion and cavitation-erosion. In this study the characteristics of electrochemical corrosion and cavitation erosion behavior were evaluated on 16.7Cr-10Ni-2Mo stainless steel under a cavitation environment in natural seawater. The electrochemical experiments have been conducted at both static conditions and dynamic conditions inducing cavitation with different current density parameters. The surface morphology and damage behaviors were compared after the experiment. After the cavitation test with time variables morphological examinations on damaged specimens were analyzed by using a scanning electron microscope and a 3D microscope. the galvanostatic experiment gave a cleaner surface morphology presented with less damage depth at high current density regions. It is due to the effect of water cavitation peening under the cavitation condition. In the cavitation experiment, with amplitude of $30{\mu}m$ and seawater temperature of $25^{\circ}C$, weight loss and cavitation-erosion damage depth were dramatically increased after 5 hours inducing cavitation.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.220-225
• /
• 2008

Lead-free ferroelectric ceramics are widely researched today for industrial applications as sensors, actuators and transducers. Since $Pb(Zr_aTi_{1-a})O_3$-(PZT) has high Curie temperature($T_C$), high piezoelectric properties near its morphotropic phase boundary(MPB) composition and small temperature dependence electrical behavior, it has been used to commercial materials for wide temperature range and different application fields. According to the tolerance factor concept, since the $Bi^{3+}$ cation with 12-fold coordinate has a smaller ionic radius than 12-fold coordinate $Pb^{2+}$, most bismuth based perovskites possess a smaller tolerance factor. Therefore, MPBs with a higher $T_C$ may be expected in $Bi(Me^{3+})O_3PbTiO_3$ solid solutions. As in lead based perovskite systems, it is clear that we need to explore more materials in simple or complex bismuth based MPB systems. The objective of this study is to investigate the $Bi(Ni_{1_a}X_a)O_3-PbTiO_3(X=Ti^{4+},\;Nb^{5+})$ perovskite solid-solution. For improving the electronic conduction problem, the magnesium and manganese modified system was also studied.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.366-373
• /
• 1998

Polydentate Schiff base ligands, BSDT(1,9-bis(2-hydroxyphenyl)-2,5,8-triaza-1,8-nonadiene) having $N_3O_2$ atoms, BSTT(1,12-bis(2-hydroxyphenyl)-2,5,8,11-tetraaza-1,11-dodecadiene) having $N_4O_2$ atoms, BSTP(1,15-bis(2-hydroxyphenyl)-2,5,8,11,14-pentaaza-1,14-pentadodecadiene) having $N_5O_2$ atoms were synthesized. Protonation constants of these polydentate ligands were measured by potentiometry. Stability constants of the complexes between these ligands and the metal ions such as Cu(II), Ni(II) and Zn(II) were measured in DMSO by a polarographic method. It was observed that all metal(II) ions employed in this study formed 1:1 complexes with Schiff base ligands. Stability constants for the complex formation were in the order of Cu(II)>Ni(II)>Zn(II), and for the ligands were in the order of BSTP>BSTT>BSDT. There are due to the increase in the number of donor atoms. Both enthalpy and entropy changes were obtained in negative values. Exothermicity for the complex formation indicated tight binding between the ligands and metal ions. The negative entropy change would be related to the fact that solvent molecules are strongly interacting with the metal complexes.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.2044-2051
• /
• 2017

The main pathological hallmark of Alzheimer's disease is the deposition of amyloid-beta ($A{\beta}$) peptides in the brain. $A{\beta}$ has been widely used to mimic several aspects of Alzheimer's disease. However, several characteristics of amyloid-induced Alzheimer's disease pathology are not well established, especially in mice. The present study aimed to develop a new Alzheimer's disease model by investigating how $A{\beta}$ can be effectively aggregated using prokaryotes and eukaryotes. To express the $A{\beta}42$ complex in HEK293 cells, we cloned the $A{\beta}42$ region in a tandem repeat and incorporated the resulting construct into a eukaryotic expression vector. Following transfection into HEK293 cells via lipofection, cell viability assay and western blotting analysis revealed that exogenous $A{\beta}42$ can induce cell death and apoptosis. In addition, recombinant His-tagged $A{\beta}42$ was successfully expressed in Escherichia coli BL21 (DE3) and not only readily formed $A{\beta}$ complexes, but also inhibited the proliferation of SH-SY5Y cells and E. coli. For in vivo testing, recombinant His-tagged $A{\beta}42$ solution ($3{\mu}g/{\mu}l$ in $1{\times}PBS$ containing $1mM\;Ni^{2+}$) was injected stereotaxically into the left and right lateral ventricles of the brains of C57BL/6J mice (n = 8). Control mice were injected with $1{\times}PBS$ containing $1mM\;Ni^{2+}$ following the same procedure. Ten days after the sample injection, the Morris water maze test confirmed that exogenous $A{\beta}$ caused an increase in memory loss. These findings demonstrated that $Ni^{2+}$ is capable of complexing the 50-kDa amyloid and that intracerebroventricular injection of $A{\beta}42$ can lead to cognitive impairment, thereby providing improved Alzheimer's disease models.