• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.229-229
• /
• 2011

• 소성∙가공
• /
• 제7권5호
• /
• pp.465-473
• /
• 1998

The effect of alloying elements of Ag-Cu-Zr-X brazing alloy on the microstructure and the bond strength of $Al_2O_3/Ni-Cr$ brazed steel joint was investigated. The reaction layer, $ZrO_2$ (a=5.146 ${\AA}$ , b=5.213 ${\AA}$ , c=5.311 ${\AA}$ )was formed at the interface of $Al_2O_3/Ni-Cr$ steel joint by the redox reaction between alumina and Zr. The addition of An and Al to the Ag-Cu-Zr brazing alloy gave rise to changes in the thickness of the reaction product layer and the morphology of the brazement. Sn caused the segregation of Zr was decreased b Al the $ZrO_2$ layer formed at the Ag-Cu-Zr-Al alloy was thinner than that of $ZrO_2$ formed at the Ag-Cu-Zr-An alloy. The fracture shear strength was strongly dependent on the microstructure of the brazement. Brazing with Ag-Cu-Zr-Sn alloy resulted in a better bond strength than with Ag-Cu-Zr or Ag-Cu-Zr-Al alloy.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.111-118
• /
• 1999

Ni(Fe)Al powders containing a homogeneous distribution of the in-situ formed AIN and $Al_2O_3$ dispersoids have been produced by mechanical alloying process in a controlled atmosphere using high energy attrition mill. The powders have been successfully consolidated by hot extrusion process. The phase information investigated by TEM and XRD analysis reveals that Fe can be soluble up to 20% to the NiAl phase ($\beta$) at room temperature after MA process. Subsequent thermomechanical treatment under specific condition has been tried to induce secondary recrystallization (SRx) to improve high temperature properties, however, the clear evidence of SRx was not obtained in this material. Mechanical properties in term of strength at room temperature as well as at high temperatures have been improved by the addition pf AIN, and the room temperature ductility has been shown to be improved after heat treatment, presumably due to the precipitation of second phase of $\alpha$ in this material.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.799-802
• /
• 2003

[ $LaNiO_3$ ](LNO) thin films were deposited on various substrates as Si and $Al_2O_3$ by sol-gel process using lanthanum nitrate and nickel acetate. The structure and orientation of the films were characterized by X-ray diffraction. The orientation factors of films on Si(100), Si(111), $SiO_2/Si(100)$ and $Al_2O_3$were 97%, 63%, 73%, and 24% respective. The conductivity was $7.6{\times}10^{-3}{\Omega}{\cdot}cm$ with 10 times coating at Si(100) substrate.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3213-3217
• /
• 2012

Reactive adsorption desulfurization (RADS) experiments were conducted over a series of commercial metal oxide supports ($Al_2O_{3-}$, $SiO_{2-}$, $TiO_{2-}$ and $ZrO_{2-}$) supported Ni/ZnO adsorbents. The adsorbents were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), and Fourier transform infrared spectroscopy (FTIR) in order to find out the influence of specific types of surface chemistry and structural characteristics on the sulfur adsorptive capacity. The desulfurization performance of all the studied adsorbents decreased in the following order: Ni/ZnO-$TiO_2$ > Ni/ZnO-$ZrO_2$ > Ni/ZnO-$SiO_2$ > Ni/ZnO-$Al_2O_3$. Ni/ZnO-$TiO_2$ shows the best performance and the three hour sulfur capacity can achieve 12.34 mg S/g adsorbent with a WHSV of $4h^{-1}$. Various characterization techniques suggest that weak interaction between active component and support component, high dispersion of NiO and ZnO, high reducibility and large total Lewis acidity of the adsorbents are important factors in achieving better RADS performance.

• 공업화학
• /
• 제10권2호
• /
• pp.237-241
• /
• 1999

니켈을 알루미나와 실리카 담체에 담지 한후 CFC-113 ($CF_2Cl$-$CFCl_2$)을 수소 기류 중에서 3FCl ($CF_2$=CFCl, CFC-1113)로 하는 환원반응을 실시하였다. 실리카나 알루미나의 경우 모두 활성이 급격히 저하하였으며 니켈의 함량이 증가할수록 저하속도는 현저하였다. 그러나 선택성은 80% 수준을 유지하면서 변하지 않았다. 알루미나 상에 동과 리티움을 니켈과 동시에 담지 시켰을 시는 활성과 선택성이 크게 개선되었다. 그러나 과량의 리티움의 증가는 활성과 선택성을 모두 저하시켰다. 담체로 실리카를 사용한 경우에는 활성이 급격히 저하되었는데, 이는 반응중 생성 된 HF가 Silica와 반응, $SiF_4$로 증발됨으로서 표면적이 큰 실리카 담체의 손실 또는 알카리 금속의 첨가로 인한 활성점의 감소에 의한 것으로 보여 진다.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.714-722
• /
• 2019

산 염기성질이 다양하게 존재하는 담체($SiO_2-Y_2O_3$, $Al_2O_3$, $SiO_2-ZrO_2$, $SiO_2$, $TiO_2$, MgO) 상에 17 wt% Ni을 고정한 상태에서 함침법을 사용하여 촉매를 제조하여 수소 존재 하에 에탄올과 암모니아의 환원성 아민화 반응에 대한 촉매활성을 비교 평가하였다. 반응 전후에 있어 사용된 촉매는 X-선 회절, 질소 흡착, 에탄올-승온탈착(EtOH-TPD), 이소프로판올-승온탈착(IPA-TPD), 수소 화학흡착을 사용하여 특성분석을 수행하였다. pH 9.5 이상에서 침전법을 사용하여 $ZrO_2$와 $Y_2O_3$ 담체 제조 시 파이렉스 반응기에서 미량의 Si 용융으로 인해 $SiO_2-ZrO_2$와 $SiO_2-Y_2O_3$ 복합 산화물이 각각 생성되었다. 사용된 촉매 중에서 $Ni/SiO_2-Y_2O_3$ 촉매가 가장 좋은 활성을 보였으며 이는 높은 니켈 분산도와 EtOH-TPD와 IPA-TPD에서의 낮은 탈착온도 등과 밀접한 관련이 있었다. Ni/MgO 촉매상에서의 낮은 촉매 활성은 NiO-MgO 고형물 형성에 기인한 것으로 보이며, $Ni/TiO_2$ 경우에서는 담체-금속 간의 강한 상호 작용으로 인해 낮은 니켈 금속 상 존재로 인해 반응성이 낮게 나왔다. $TiO_2$와 MgO 이외의 담체를 사용한 경우에 있어서 유사한 에탄올 전환율에서의 에틸아민류와 아세토니트릴 선택도는 큰 차이를 보이지 않았다.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.631-635
• /
• 2012

Nickel oxide was doped with a wide range of concentrations (mol%) of Aluminum (Al) by solvothermal synthesis; single-phased nano powder of nickel oxide was generated after calcination at$900^{\circ}C$. When the concentration of Al dopant was increased, the reduced intensity was confirmed through XRD analysis. Lattice parameters of the synthesized NiO powder were decreased after treatment of the dopant; parameters were increased when the concentration of Al was over the doping limit (5 mol% Al). The binding energy of $Ni^{2+}$ was chemically shifted to $Ni^{3+}$ by doping $Al^{3+}$ ion, as confirmed by the XPS analysis. The tilted structure of the synthesized NiO with 5 mol% Al dopant and the polycrystalline structure of the $Ni_{0.75}Al_{0.25}O$ were observed by HR-TEM analysis. The electrical conductivity of the newly synthesized NiO was highly improved by Al doping in the conductivity test. The electrical conductivity values of the commercial NiO and the synthesized NiO with 5 mol% Al dopant ($Ni_{0.95}Al_{0.05}O$) were 1,400 s/cm and 2,230 s/cm at $750^{\circ}C$, respectively. However, the electrical conductivity of the synthesized NiO with 10 mol% Al dopant ($Ni_{0.9}Al_{0.1}O$) decreased due to the scattering of free-electrons caused by the large number of impurity atoms; the electrical conductivity of $Ni_{0.9}Al_{0.1}O$ was 545 s/cm at $750^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.208-208
• /
• 2009

메탄의 수증기-이산화탄소 복합개질반응에서 니켈 촉매의 탄소 침적 저항성에대한 Ce 증진 효과를 살펴보기 위해, Ni-Ce/${\alpha}-Al_2O_3$ 촉매를 제조하였다. Ce/Ni 비율 변화에 따른 촉매 비표면적, Ni 입자 분산도 및 촉매 활성 변화를 살펴보았고, Ce 첨가량을 최적화 할 수 있었다. Ce/Ni 비율 증가에 따라 NiO 결정크기가 감소하고 표면적과 Ni 분산도는 증가하였다. 특히, Ce/Ni=0.5 첨가 시, 촉매는 가장 넓은 비표면적과 Ni 분산도를 가졌으며, 우수한 촉매 활성 및 높은 탄소 침적 저항성을 보였다. 또한, 본 연구에서는 Ni과 Ce 담지 방법에 따른 Ni 분산도 향상과 Ni과 Ce간의 접촉 면적 극대화를 통한 활성산소 공급 향상에 대한 영향을 함께 살펴보았다. Ni과 Ce를 동시 함침법과 연속 함침법으로 담지하여 비교한 결과, 동시 함침법으로 제조한 Ni-Ce/${\alpha}-Al_2O_3$ (Ce/Ni=0.5) 촉매가 가장 우수한 촉매 성능 및 높은 탄소 침적 저항성을 보였다. 이는 동시 함침법으로 고분산된 Ni 입자와 담체간의 강한 상호작용 형성과 원활한 활성 산소 공급에 기인한 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3387-3390
• /
• 2013

Catalytic gasification of mandarin waste residue was carried out using direct and indirect catalyst-contact methods for the first time. In the indirect method, non-catalytic reaction in a reactor was followed by catalytic upgrading of vapor product in another reactor. Two different catalysts, $Ni/{\gamma}-Al_2O_3$ and $Ni/CeO_2-ZrO_2$, were employed. $CeO_2-ZrO_2$ support was prepared using hydrothermal synthesis in supercritical water. The catalysts were characterized by $H_2$-temperature programmed reduction and Brunauer-Emmett-Teller analyses. Under the condition of equivalent ratio (ER) = 0, the indirect catalyst-contact method led to a higher gas yield than the direct method. Under ER = 0.2, the yield of biogas obtained over $Ni/CeO_2-ZrO_2$ was higher than that obtained over $Ni/{\gamma}-Al_2O_3$. Also, the coke formation of $Ni/CeO_2-ZrO_2$ was lower than that of $Ni/{\gamma}-Al_2O_3$. Such results were attributed to the higher reducibility and better lattice oxygen mobility of $Ni/CeO_2-ZrO_2$, which were advantageous for partial oxidation reaction.