• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.289-291
• /
• 2004

ln this paper, A dc-offset elimination novel algorithm based on an An model is proposed. The algorithm can eliminate dc-offset rapidly than other algorithms. The signal of fault current can be presented as a linear equation combined sinusoidal with exponential signals. Then, the linear equation can be presented an auto-regressive(AR) model and do-offset can be calculated by the equation of AR model. So it is possible to be removed the dc-offset from the original current signal. Performance evaluation of the algorithm was tested on condition that A-phase ground fault on 154kV 25km overhead transmission line.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.403-405
• /
• 2004

A service restoration is one of the most important missions in distribution system operation. This paper proposes a multi-agent system approach to distribution system restoration. Every relay is developed as an agent by adding its own intelligent, self-tuning and communication ability. Relay agent calculates and corrects its restoration index by itself through communication with neighboring agents and its own intelligence. The proposed algorithm is applied to a simple network to show how to calculate restoration index. Keywords Multi-Agent System, Service Restoration, Distribution Networks

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.412-414
• /
• 2004

In this paper, a novel algorithm of underground cable fault location based on the analysis of distributed parameter circuit is proposed. The proposed method makes voltage and current equations about core and sheath, and then establishes a function of the fault distance according to the analysis of fault conditions. Finally gets the solution of this function through Newton-Raphson iteration method. The effectiveness of proposed algorithm has been verified by Matlab program, and the cable parameters such as impedance and admittance are from EMTP simulation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.435-436
• /
• 2008

차세대 초고속 공기흡입식 추진기관의 제작 소요 기술을 분류하였으며, 현대로템(주)에서 보유하고 있는 액체로켓엔진과 국내에 기확보되어 있는 가스터빈 및 항공기용 애프터버너의 제작기술을 차세대 초고속 공기흡입식 추진기관 제작에 적용 또는 응용이 가능한 지를 검토하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.840-841
• /
• 2012

본 논문에서는 차세대 IT 분야에 임베디드 시스템 응용에 대해 논의하였다. 이를 위해 먼저 차세대 IT 분야에 있어서 임베디드 시스템의 중요성에 대해 언급하였다. 또한, 하드웨어 기반의 임베디드 시스템, 임베디드 하드웨어 프로세서, 특겅 목적의 프로세서에 대해 논의하였으며 이를 근간으로 임베디드 시스템의 응용 분야에 대해 논의하였다.

• Journal of Computing Science and Engineering
• /
• 제6권4호
• /
• pp.310-319
• /
• 2012

Next generation wireless receivers demand low computational complexity algorithms with high computing power in order to perform fast signal detections and error estimations. Several signal detection and estimation algorithms have been proposed for next generation wireless receivers which are primarily designed to provide reasonable performance in terms of signal to noise ratio (SNR) and bit error rate (BER). However, none of them have been chosen for direct implementation as they offer high computational complexity with relatively lower computing power. This paper presents a low-complexity power-efficient algorithm that improves the computing power and provides relatively faster signal detection for next generation wireless multiuser receivers. Measurement results of the proposed algorithm are provided and the overall system performance is indicated by BER and the computational complexity. Finally, in order to verify the low-complexity of the proposed algorithm we also present a formal mathematical proof.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2016년도 제53차 동계학술대회논문집 24권1호
• /
• pp.219-222
• /
• 2016

블록형 구조물의 구축은 완구의 목적으로 널리 사용되고 있으며 이외에도 제품 디자인을 위한 래피드 프로토타이핑 및 창의학습을 위한 도구로도 활용되고 있다. 본 논문은 블록형 구조물을 적은 비용으로 손쉽게 설계하고 구축하기 위하여 블록형 구조물 자동 생성 기능 및 편집 기능을 제공하는 소프트웨어 시스템을 개발하였다. 본 시스템을 이용하여 가상공간에서 자유롭게 블록형 구조물을 생성 및 편집할 수 있고, 실제 구조물의 조립을 위한 매뉴얼로 활용할 수 있다.

• Journal of Information Technology Applications and Management
• /
• 제24권3호
• /
• pp.107-123
• /
• 2017

This study uses the concept of dominant design to identify the determinants for the emergence of a next-generation dominant electronic display. It employs multiple research methods with the participation of display experts, which combine case studies, an unstructured interview, and the Delphi method. The results show that based on technological innovation and market dominance, a next-generation dominant display is more likely to emerge as a result of technological competition between liquid crystal displays (LCDs) and organic light-emitting diodes (OLEDs). The findings emphasize that the importance of rapid technological innovation, including component and process innovations, and a competitive edge in manufacturing costs are important. The study sheds light on our understanding of dominance in an industry and market, and also provides strategic guidance for practitioners to establish a competitive strategy.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.13-18
• /
• 1998

Many factors influence SF6 insulation and a number of them have been clarified quantitatively. For the next generation of gas-insulated switchgear (GIS), quantitative considerations of these factorsare necessary to enhance reliability and to make GIS more compact. Advanced insulation technology this purpose is described.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2001년도 디지털 방송기술 워크샵
• /
• pp.335-354
• /
• 2001

.Next Generation Multimedia Streaming Technology Massive Scale Support $\rightarrow$ Clustered Solution Adaptive to Heterogeneous Network daptive to Heterogeneous Terminal Capability Presentation Technique .SMART Server Architecture .HERMES File System .Clustered Solution . High Speed Storage Interconnect .' Content Partitioning . Load Management . Support for Heterogeniety . Adaptive End to End Streaming Transport: Unicast vs. Multicast '. Scalable Encoding