• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.468-471
• /
• 2002

A strong need to improve the quality of electric power is increased because of increasing use of the sensitive and small-sized electronic devices. The surges on the low-voltage ac power lines are induced by nearby lightning return strokes, and the facilities for HA, OA, FA, ME as well as computer are easily damaged by high-voltage transients. The behaviors of lightning surge characteristics transferred from the primary winding to the secondary winding in distribution transformers using a Marx generator were experimentally investigated. The transfer characteristics of lightning surge associated with a custom service ground of secondary side were also examined.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.10
• /
• pp.159-166
• /
• 2017

This study is a discussion of business process reengineering for the next generation information system. To be concrete, we analyze and reengineer the current business process in administration of academic, general and research. This reengineering is conformed by 5 steps, as analyzing environmental status that figures out factors of inside or outside (environmental analyzing), analyzing current condition that diagnoses AS-IS process (current situation analysis), establishing information-oriented vision with strategic accomplishing goals accordingly (visioning), deducing detailed improving tasks (defining tasks), and engineering TO-BE process comprehending improving matters (engineering model). This paper shows BPR model for next generation information system.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.707-712
• /
• 2008

As RAMS becomes an international trend in the railroad industry, it is also generalized in the domestic railroad industry. This research is performed to present a criterion of the RAMS plan for the next generation high speed rolling stock. The criterion is developed based on IEC62278(EN50126), the international standard for railroad RAMS and CLC/TR 50126-2, 3, the guide to the application of IEC 62278. It is necessary for the export of the rolling stock. The criterion describes the RAMS targets and the contents to be included in the RAMS plan to meet the RAMS targets. Through developing the RAMS plan, we can identify RAMS activities and documents to be done in the total life cycle which includes design, manufacture and operation. It will help to accomplish synthetically the system targets of the next generation high speed rolling stock.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.335-342
• /
• 2016

We demonstrate an optical asynchronous transfer mode/wavelength division multiplexing (OATM/WDM) optical access network, using a router based on an optical header decoder to conduct next-generation communications. The router consists of a decoder or hardware analysis processing of the header bit and switches. The router in the OATM/WDM optical access network is a key technology by which to satisfy subscribers’ requests, including reliability, cost efficiency, high speed, large-capacity transmission, and elevated information security. In this study, we carry out experiments in which a header decoder delivers to 16 and 32 subscribers with a single wavelength in the router. These experiments confirm the decoder’s successful operation via hardware using 4 and 5 header bits. We propose that this system may significantly contribute toward the realization of an optical access network that provides high-quality service to subscribers of next-generation communications.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.51-55
• /
• 2004

In the design stage of high precision manufacturing/inspection FAB facilities, it is necessary to investigate the allowable vibration limits of high precision equipments and to study structural dynamic characteristics of C/R and Sub-structure in order to provide structural vibration criteria to satisfy these allowable limits. The goal of this study is to investigate the dynamic characteristics of PC-Type mock-up structures designed for next generation TFT-LCD FAB through experiments and analysis procedures. Therefore, in order to provide a proper dynamic structural design for high precision manufacturing/inspection work process, these allowable limits must be satisfied.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.223-226
• /
• 2004

This paper presents a feasibility study of an advanced IO board design for the next generation of low-earth orbit satellites. Advanced IO board design includes sensor interface, NO, D/A, Digital Module, Serial Module etc, and allows to process increasing data rates between IO board and CPU board. The higher data rate involved in modem IO board additionally introduce issues such as noise, fault tolerance, command and data handling, limited pin count and power consumption problems. The experience in KOMPSAT-l and 2 program with this kind of problems resulted in using SMCS chip set, a high speed serial link technology based on IEEE-1355 (Space Wire Protocol) (ESA-ESTEC 2003, Parkes 1999), as a standard for next generation of satellite IO board design.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.105-108
• /
• 2003

In the next generation backbone networks based on dense-wavelength division multiplexing (DWDM), the routing and wavelength assignment with quality-of-service (QoS) recovery is essentially needed to support a wide range of communication-intensive and real-time multimedia services. This paper proposes a new dpmic routing method called as MW-MIPR (MultiWavelength-Minimum Interference Path Routing), which chooses a route that does not interfere too much with many potential future connection requests. This paper also proposes a differentiated RWA mechanisms combined with MW-MIPR algorithm to provide QoS recovery for various multimedia applications in the next generation backbone networks based on DWDM.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.178-180
• /
• 2003

This paper proposes a real-time simulator that can simulate dynamic changes of a substation for intelligent SCADA system. The simulator consists of RTDS, voltage and current amplifier, IED, and RTU. The simulator is verified by system implementation and event simulation of a substation.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.187-189
• /
• 2003

This paper presents new service restoration algorithm to deal with multiple faults such as main transformer fault, whole substation fault and simultaneous faults. The most important consideration of restoration planning for multiple outage areas is efficient use of redundant backup feeders. The proposed algorithm tries to restore all outage loads using outage area ordering method and tie switch exchange method that are newly proposed in this paper.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.434-439
• /
• 2002

The researches on the direct drive system, which directly transfers axle load of the traction motor to wheels, have been developed as a next generation drive system in Japan and Europe. As a result of excluding couplings and gear units, the direct drive system has advantages on the bogie mount space to be smaller sized, lower noisy, more efficient and less weighted than the conventional drive system - indirect drive system. Since the simplification of the direct drive system design depends on the design of the traction motors, the researches on the direct drive system with focusing on the traction motors get started. The advantages/disadvantages of direct drive system, types, structures, cooling systems and interfaces of the traction motors are presented on this paper. Furthermore, the development of other countries on the electric equipments of the next generation railway vehicles are discussed and the necessity ＆ requirement for developing new concepts of traction motors are assured.