• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.255-258
• /
• 2011

Wi-Fi is a rapidly spreading communications network with Smart phone's publication, the technology has become Ubiquitous-based core network which is connected to personal computers, laptops, and tablet PC. Wi-Fi can send currently a variety of data standard due to developed wireless LAN communications network. One of Wi-Fi standard protocols, which is IEEE 802.11n, use 2.4GHz and 5GHz band. 2.4GHz band is used for 802.11b/g protocol because wavelength is long, diffraction and receiving distance is enough to connect other device. 5GHz band has more available channels to use than 2.4GHz band, so there is no frequency interference of other wireless device such as Bluetooth, RFID. Moreover, there is low interference between channels due to small users in each bandwidth level. In the thesis, we are going to analyze 802.11a/b/g protocol which has used since the beginning of Wi-Fi protocol and 802.11n protocol which is used lately. Furthermore, we look into development and direction for standardization of the next generation wireless LANs which are 802.11ac and 802.11ad. In addition, we will consider for the security, vulnerabilities and its countermeasure in Wireless LAN.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2806-2811
• /
• 2013

New technologies such as multi-antenna and small cell were proposed as key technology for the next generation mobile system to cope with the explosively increasing mobile data traffic. In particular, heterogeneous mobile communication network which can improve spatial reuse factor by exploiting macro and small cells simultaneously is attracting attention. However, the heterogeneous network has a problem that the utilization of small cells becomes low because the transmit power of macro base stations is much higher than that of small base stations and then the probability that mobile stations are attached to the macro base stations becomes high. This problem is dominant in uplink. The concept of cell range expansion bias to mitigate the problem was proposed by 3GPP and the corresponding standardization is in progress. In this paper, we analyze the downlink performance of the heterogeneous mobile communication network based on a system level simulator with the cell range expansion bias in terms of average cell spectral efficiency.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.545-558
• /
• 2003

It is expected that per-user customized services are widely used in next generation Personal Communication Network. The ultimate goal for personalized service is the Virtual home Environment (VHE) providing ´same-look-and-feel´ services for the subscriber wherever he roams to. To provide personalized services for each call, per-user service profiles are frequently referenced, so efficient service profile management is essentially required. To realized the VHE, typically two schemes, can be employed; One is Intelligent Network based service control and the other is a full replication scheme that always replicates profile in user´s current zone. The first scheme is referred as Central scheme and th second scheme is the modified replication scheme of IMT-2000, we refer to as Follow-Me Replication Unconditional (FMRU). Since the Central scheme only depends on the service cal rate and the FMRU is merely dependent on the movement rate, it is apparent that FMRU scheme outperforms the Central scheme if the call to mobility ratio (CMR) is large, and vice versa. In this paper, we propose a new service profile replication schemes, Adaptive Follow-Me Replication (AFMR) that determine replication automatically according to the user´s CMR. We compared the performance of the AFMR with the non-adaptive Follow-Me Replication unconditional on Demand (FMRUD) scheme. Performance results indicate that as the CMR of a user changes AFMR adapts well compared to the existing schemes.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.447-454
• /
• 2003

Optical burst switching (OBS) has been proposed to reduce the use of fiber delay lines (FDLs) and to realize the optical switching paradigm of the next-generation ail optical networks. The OBS can provide improvements over wavelength routing in terms of bandwidth efficiency and core network scalability via statistical multiplexing of bursts. Recently, another challenging issue is how to upport quality of service (QoS) in the optical burst switching networks. In this paper, we propose a deflection routing scheme to guarantee the QoS for the OBS networks to detour lower priority burst forward to the deflection routing path when congested. A big advantage of the proposed scheme is the simplicity of QoS provision, that comes from the simple QoS provisioning algorithm. Also, the QoS provisioning scheme be able to make efficient networks by fairly traffic distributing with the reduce of the use of FDLs at core routers. The QoS provisioning scheme has been verified to reliably guarantee the QoS of priority 0, 1, 2 burst and to efficiently utilize network resources by computer simulations using OPNET As results, the end-to-end delay of high priority burst is improved, and the network efficiency is also improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3672-3679
• /
• 2012

Vehicle Ad hoc Network (VANET) is next-generation network technology to provide various services using V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In VANET, many researchers proposed various studies for the safety of drivers. In particular, using the emergency message to increase the efficiency of traffic safety have been actively studied. In order to efficiently transmit to moving vehicle, to send a quick message to as many nodes is very important via broadcasting belong to communication range of vehicle nodes. However, existing studies have suggested a message for transmission to the communication node through indiscriminate broadcasting and broadcast storm problems, thereby decreasing the overall performance has caused the problem. In addition, theses problems has decreasing performance of overall network in various form of road and high density of vehicle node as urban area. Therefore, this paper proposed Clustering based Routing Algorithm (CBRA) to efficiently transmit emergency message in high density of vehicle as urban area. The CBRA managed moving vehicle via clustering when vehicle transmit emergency messages. In addition, we resolve linkage problem between vehicles according to various form of road. The CBRA resolve link brokage problem according to various form of road as urban using clustering. In addition, we resolve broadcasting storm problem and improving efficacy using selection flooding method. simulation results using ns-2 revealed that the proposed CBRA performs much better than the existing routing protocols.

• Journal of Internet Computing and Services
• /
• v.21 no.6
• /
• pp.1-12
• /
• 2020

Low-Orbit satellite mobile networks can provide services through miniaturized terminals with low transmission power, which can be used as reliable means of communication in the national public disaster network and defense sector. However, the high traffic environment in the emergency preparedness situation increases the new call blocking probability and the handover failure probability of the satellite network, and the increase of the handover failure probability affects the QoS because low orbit satellites move in orbit at a very high speed. Among the channel allocation methods of satellite communication, the FCA shows relatively better performance in a high traffic environment than DCA and is suitable for emergency preparedness situations, but in order to optimize QoS when traffic increases, the new call blocking and the handover failure must be minimized. In this paper, we propose LEO-DBC (LEO satellite dynamic beam width control) technique, which improves QoS by adaptive adjustment of beam width of low-orbit satellites and call time of terminals by improving FCA-QH method. Through the LEO-DBC technique, it is expected that the QoS of the mobile satellite communication network can be optimally maintained in high traffic environments in emergency preparedness situations.

• Journal of Broadcast Engineering
• /
• v.27 no.1
• /
• pp.69-79
• /
• 2022

In this study, a method of generating and utilizing a normal map image used to represent the characteristics of the surface of an image material to improve the classification accuracy of the original material image is proposed. First of all, (1) to generate a normal map that reflects the surface properties of a material in an image, a U-Net with attention-R2 gate as a generator was used, and a Pix2Pix-based method using the generated normal map and the similarity with the original normal map as a reconstruction loss was used. Next, (2) we propose a network that can improve the accuracy of classification of the original material image by applying the previously created normal map image to the attention gate of the classification network. For normal maps generated using Pixar Dataset, the similarity between normal maps corresponding to ground truth is evaluated. In this case, the results of reconstruction loss function applied differently according to the similarity metrics are compared. In addition, for evaluation of material image classification, it was confirmed that the proposed method based on MINC-2500 and FMD datasets and comparative experiments in previous studies could be more accurately distinguished. The method proposed in this paper is expected to be the basis for various image processing and network construction that can identify substances within an image.

• Journal of Periodontal and Implant Science
• /
• v.53 no.3
• /
• pp.233-244
• /
• 2023

Purpose: An implant-supported prosthesis consists of an implant fixture, an abutment, an internal screw that connects the abutment to the implant fixture, and the upper prosthesis. Numerous studies have investigated the microorganisms present on the implant surface, surrounding tissues, and the subgingival microflora associated with peri-implantitis. However, there is limited information regarding the microbiome within the internal screw space. In this study, microbial samples were collected from the supragingival surfaces of natural teeth, the peri-implant sulcus, and the implant-abutment screw hole, in order to characterize the microbiome of the internal screw space in healthy subjects. Methods: Samples were obtained from the supragingival region of natural teeth, the peri-implant sulcus, and the implant screw hole in 20 healthy subjects. DNA was extracted, and the V3-V4 region of the 16S ribosomal RNA was sequenced for microbiome analysis. Alpha diversity, beta diversity, linear discriminant analysis effect size (LEfSe), and network analysis were employed to compare the characteristics of the microbiomes. Results: We observed significant differences in beta diversity among the samples. Upon analyzing the significant taxa using LEfSe, the microbial composition of the implant-abutment screw hole's microbiome was found to be similar to that of the other sampling sites' microbiomes. Moreover, the microbiome network analysis revealed a unique network complexity in samples obtained from the implant screw hole compared to those from the other sampling sites. Conclusions: The bacterial composition of the biofilm collected from the implant-abutment screw hole exhibited significant differences compared to the supra-structure of the implant. Therefore, long-term monitoring and management of not only the peri-implant tissue but also the implant screw are necessary.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.81-87
• /
• 2003

It is very difficult assignment that grasp three-dimensional real life in Web base network environment. But, the recent simulation tools embody third dimension elements within 2 dimensions screen that is limited through third dimension implementation technology. Many GIS tools are offering excellent functions for third dimension data creation. But, research about design of third dimension GIS that use virtual reality technique in Web environment is status that is unprepared. So, in this research embodied third dimension topography map using virtual reality modelling language to produce active third dimension VR map that can supply visual information for direction, visual point that want in World Wide Web without support of expensive Map exclusive use program. And these 3D Web-Map is thought that possibility is enough as next generation map medium.

• Korean Journal of Optics and Photonics
• /
• v.23 no.1
• /
• pp.6-11
• /
• 2012

A bidirectional TDM-PON link to support 2.5 Gb/s upstream signals of 256 ONUs was considered for an extended transmission distance of 50 km. The power budget of the link was 58 dB for the upstream signal and a SOA was applied as a link extender which had a 25 dB gain. Receiver sensitivity of the upstream signal was -25 dBm for -30 dBm input power to the SOA. When the input power was -10 dBm, pulse overshooting caused by gain transient of the SOA was maximum at 45% and the signal performance degradation gave a power penalty of 1.55 dB for $10^{-12}$ BER. However the penalties diminished rapidly and became negligible as the input power went below -15 dBm. So this input power dynamic range of up to -15 dBm means that it is not positively necessary to use gain control methods for the next generation TDM-PON systems.