• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.984-988
• /
• 2010

In Korea, the next generation high-speed train, whose target is maximum speed of 400km/h and operating speed of 370km/h, has been developed since 2007. In this paper, the safety of the next generation high-speed train is compared UIC 518OR under the malfunctioning situation of the suspension system. The bogie of the next generation high-speed train has two suspensions. Two different vehicle models of the next generation high-speed train are created by using VAMPIRE and ADAMS/Rail, which are specialized to design railway vehicle. And Those models are showed same dynamic properties. First of all, the sensitivity analysis of ModelCenter is performed using model of VAMPIRE. One suspension element which has significant effects on the safety are selected by result of the sensitivity analysis. And then, the dynamic analysis when the suspension element is broken is performed using ADAMS/Rail. The 30km track between Pungsegyo and Biryong tunnel in Gyeongbu High-speed Line was used at the dynamic analysis. The estimated value is found by using the normal method of UIC 518OR. The estimated values on the normal/fault state and the limit values of UIC 518OR are compared. Finally, the safety of the next generation high-speed train is verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.948-949
• /
• 2008

In this paper, an effect on power conversion unit in next generation high-speed train by loss of contact between a contact wire and pantograph supplied electrical power to high-speed train are investigated. One of the most important needs accompanied by increasing the speed of high-speed train is reduced that arc phenomenon by loss of contact brings out EMI. To analysis of conducted EMI source on powering mode of next generation high-speed train, it is necessary electrical modeling system between the contact wire and the pantograph according with loss of contact. Therefore analytical model of a contact wire and a pantograph is constructed to simulate the behaviour of loss of contact. The reliability of the modeling system is verified by simulation implementation on loss of contact.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.874-882
• /
• 2008

In a domestic, HSR-350x which has the maximum speed 350km/h was developed and then next, the next generation high speed train which has the maximum speed 400km/h has still been developing. With developing the next generation high speed railway, there need to be a general plan to make sure of dynamic safety though the a study on the crack and failure of rail by rolling contact fatigue. Therefore, this study investigated occurring stress of rail according to the track quality, train velocity, wheel radius, track stiffness, distance between sleepers, axial force using Eisenmann's equations. For the more, via the finite element method, it investigated shear force on the rail head which could be changed by the early crack length, angle and temperature. As a result, this study confirmed the main elements which effect on the fatigue life cycle of rail.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.186-193
• /
• 2015

본 연구에서는 차세대 고속열차의 신뢰성 성장률 분석에 대한 연구를 수행하였다. 차세대 고속열차의 신뢰성 평가를 효과적으로 수행하기 위해서 6개의 서브시스템으로 분류를 하였으며, 이에 대한 기능블록선도와 신뢰성블록선도를 도출하였다. 또한 안정화 시험 중에 수행된 시험결과를 바탕으로 고장정보분석을 수행하였다. 그리고 Duane 모델에 기반한 신뢰성 성장률 분석을 차세대 고속열차의 실험 결과에 적용하였다. 본 연구를 통해서 지속적인 차량의 유지 보수 활동이 신뢰성 성장에 영향을 미치고 있음을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2684-2690
• /
• 2011

The bogie is one of the most important components in a railway vehicle. So a lot of study has been carried out for safety and reliability of the bogie frame in experimental and simulation. In this paper, Presents an experimental study on health monitoring of next generation high-speed train bogie frame. The ultimate objective of this paper is to estimate the sensor located for health monitoring of bogie. The result from this study might be used essential data in order to construct the next generation high speed train bogie frame health monitoring.

• Advances in Computational Design
• /
• 제8권1호
• /
• pp.1-12
• /
• 2023

To consider the effects of the increasing speed of next-generation high-speed trains, the existing traffic safety code for railway bridges needs to be improved. This study suggests a numerical method of evaluating the new effects of this increasing speed on railway bridges. A prestressed concrete (PSC) box bridge with a 40 m span length on the Gyeongbu track sector is selected as a representative example of high-speed railway bridges in Korea. Numerical models considering the inertial mass forces of a 38-degree-of-freedom train and the interaction forces with the bridge as well as track irregularities are presented in detail. The vertical deflections and accelerations of the deck are calculated and compared to find the new effects on the bridge arising with increasing speed under simply and continuously supported boundary conditions. The ratios between the static and dynamic responses are calculated as the dynamic amplification factors (DAFs) under different running speeds to evaluate the traffic safety. The maximum deflection and acceleration caused by the running speed are indicated, and regression equations for predicting these quantities based on the speed are also proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3133-3141
• /
• 2011

The next generation domestic high speed railway system is a power distributed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor drive system due to their advantages in efficiency, noise reduction and maintenance. The next-generation high speed train is composed of 2 converter units, 4 inverter units, and 4 Traction Motor units. Each motor is connected to the inverter directly. In this paper, the effect of IPMSM parameter variations to the system operation characteristics of the multi inverter drive high speed train system are investigated. The parallel connected inverter input-output characteristics are analyzed to the parameter mismatches of IPMSM using the 1C1M control simulator based on Matlab/Simulink.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.835-840
• /
• 2008

Next Generation High Speed Train having a distributed electrical motor system has just been developing to aim the experimental maximum speed at 400km/h since August, 2007. This project is in stage of concept design and so, it needs to take some review and analysis the characteristics of suspensions on the view of concept design. A vehicle modeling is made of modified Korean High Speed Train bogie model with Vampire program and analyzed the effect on the dynamic performances according to the variation of primary and secondary suspension characteristics. The results would be useful to manage the potential risks in the next stage of basic and precision design that will be done by the manufacturing company.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.51-56
• /
• 2002

A Korea next-generation high-speed rail system represents a typical example of large- scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, Information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. The system therefore, must be developed using systems engineering that is a efficient and effective methodology to design such a complex system and manage its development. This paper presents the results from a computer-aided systems engineering application to the Korea next generation high-speed railway project. Especially, the focus of the study was on requirement management and PBS management.

• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.22-31
• /
• 2002

A high-speed rail system represents a typical example of large-scale multi-disciplinary systems, consisting of subsystems such as train, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Not only the requirements of the large-scale system dictate the contracts with the suppliers but also become the basis for the development process, project execution, system integration, and testing. The requirements database provide the system design specification of all development activities. Using the RDD-100, a systems engineering tool, the Korea next-generation high-speed rail program can establish requirements traceability and development process management in performing the enabling train technology development projects. This paper presents the results from a computer-aided systems engineering application to the Korea next-generation high-speed railway project. Especially, the focus of the study was on requirement management and PBS(Product Breakdown Structure) management.