• 공업화학
• /
• 제8권4호
• /
• pp.640-644
• /
• 1997

석탄의 종류와 농도 및 CWM의 유동성을 증가시키기 위해 첨가되는 계면활성제와 전해질이 CWM의 유동특성에 미치는 영향을 조사하였다. 탄종에 따른 CWM의 점도는 O/C 비가 높을 수록 높게 나타났다. 또한 CWM은 항복응력을 갖는 비뉴톤유체의 특성을 나타내며, 항복응력은 농도가 증가함에 따라 선형적으로 증가하였다. 첨가제로 사용된 계면활성제에 따른 CWM의 유동특성은 첨가되는 계면활성제의 농도에 관계없이 n<1인 pseudoplastic의 특성을 나타내었다. 또한 전해질의 투입량이 증가할수록 n은 1로 접근하여 CWM이 뉴톤유체에 접근하는 것으로 나타났으며, 전해질을 0.05wt.% 이상 첨가하였을 때는 항복응력이 나타나지 않았다.

• 에너지공학
• /
• 제18권2호
• /
• pp.87-92
• /
• 2009

본 논문은 안쪽축이 회전하는 동심환형관 물과 비뉴튼유체의 고-액 2상 유동연구를 수행하였다. 점탄성유체의 유변학은 굴착구멍의 청결, 입자의 밖으로 수송하는 등 여러 가지 응용에 중요하다. 연구에서 투명한 아크릴관은 고체입자의 이동을 관찰하기 위하여 사용하였다. 환형관 속도는 0.3m/s에서 2.0m/s로 변한다. 머드시스템은 물과 CMC 수용액을 혼합하여 사용하였다. 연구에서 고려된 주요 변수들은 축회전속도, 유체 유동영역과 입자 주입율이다. 입자이송속도와 압력강하는 유체유량(Q, LPM)이 5~30의 범위에서 측정하였다. 물과 0.2% CMC 수용액에서 고체입자의 농도가 높을수록 압력손실이 커짐을 알 수 있었다.

• 한국추진공학회지
• /
• 제17권3호
• /
• pp.47-55
• /
• 2013

본 연구에서는 곡관 채널에서의 비뉴튼 젤 추진제의 유동 특성에 대해 연구하였다. 물을 기본유체로 하는 모사젤을 Carbopol 941 젤화 작용제와 NaOH 농축액을 혼합하여 제작하였으며 입자 유무에 따른 유동 특성을 파악하기 위해 $Al_2O_3$ 나노 입자가 첨가된 젤을 제작하여 두 젤 추진제간의 유변학적 특성을 비교하였다. 두 모사젤에 대해 U-자형의 곡관부 위치별 유동특성과 Dean 와류(vortices)의 경향은 상이하였으나 나노 입자가 첨가된 모사젤 추진제의 경우 높은 컨시스턴시 지수에도 불구하고 두 모사젤 모두 비슷한 범위의 임계 Dean 수를 도출하였다. 나노 입자 첨가 유무와 무관하게 power-law 지수값이 임계 Dean 수를 결정하는데 주요 변수임을 판단할 수 있었으나 나노입자가 첨가된 젤의 경우 Dean 와류 강도의 변동폭이 상대적으로 크다는 결론을 내릴 수 있었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.245-250
• /
• 2002

This report describes the effects of following flaws due to ship's propeller on the fish farm structure when the ship's propeller is operated in full power. This study is applied an incompressible newtonian fluid theory, which is governed the Navier-Stokes equation. For the numerical solution, Neumann equation are applied as the boundary conditions. The result shows that the flow velocity near the fish farm is 1.0 m/sec. The actual measurement carries out by using propeller type velocimeter in order to measure the velocity of following flows and currents around the fish farm area. The result shows that the maximum velocity near the fish farm structure is 1.2 m/sec in depth of 1.5 m. This velocity is used for calculation of external force on the fish farm structure. The results of structural strength of the fish farm structures show that the actual maximum bending moment and bending stress are less than the damage strength of material. So the fish farm structure is not affected by the following flows and currents of ship's propeller.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.61-67
• /
• 2014

Since the most of the existing non-Newtonian models are not adequate to apply to the lattmce Boltzmann method, it is a challenging task from both the theoretical and the numerical points of view. In this research the hydro-kinetic model was modified and applied to the 3-D moving sphere in the circular channel flow and the characteristics of the shear thinning effect by the HK-model was evaluated and the condition of ${\Gamma}$ in the model was suggested for the stable simulation to generate non-trivial prediction in three dimension strong shear flows. On the wall boundaries of circular channel the curved wall surface treatment with constant velocity condition was applied and the bounceback condition was applied on the sphere wall to simulate the relative motion of the sphere. The condition is adequate at the less blockage than 0.7 but It may need to apply a multi-scale concept of grid refinement at the narrow flow region. to obtain the stable numerical results.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.147-154
• /
• 2003

A three-dimensional numerical analysis of the flow and heat transfer characteristic of wood-flour-filled polypropylene melt in an extrusion die was carried out. Used for this analysis were Finite Concept Method based on FVM, unstructured grid and non-Newtonian fluid viscosity model. Temperature and flow fields are closely coupled through temperature dependent viscosity and viscous dissipation. With large Peclet, Nahme, Brinkman numbers, viscous heating caused high temperature belt near die housing. Changing taper plate thickness and examining some predefined parameters at die exit investigated the effect of taper plate on velocity and temperature uniformities. In the presence of taper plate, uniformity at die exit could be improved and there existed an optimum thickness to maximize it.

• Korea-Australia Rheology Journal
• /
• 제12권2호
• /
• pp.107-117
• /
• 2000

Prediction of the product shape in sheet casting process is performed from the numerical simulation. A three-dimensional finite element method is used to investigate the flow behavior and to examine the effects of processing conditions on the sheet produced. Effects of inertia, gravity, surface tension and non-Newtonian viscosity on the thickness profile of the sheet are considered since the edge bead and the flow patterns in the chill roll region have great influence on the quality of the products. In the numerical simulation with free surface flows, the spine method is adopted to update the free surface, and the force-free boundary condition is imposed along the take-up plane to avoid severe singularity problems existing at the take-up plane. From the numerical results of steady isothermal flows of a generalized Newtonian fluid, it is shown that the draw ratio plays a major role in predicting the shape of the final sheet produced and the surface tension has considerable effect on the bead thickness ratio and the bead width fraction, while shear-thinning and/or tension-thickening viscosity affect the degree of neck-in.

• Korea-Australia Rheology Journal
• /
• 제18권2호
• /
• pp.109-118
• /
• 2006

A finite-element method was employed to analyze axisymmetric unsteady motion of a deformable bubble near the wall. In the present study a deformable bubble in a Newtonian medium near the wall was considered. In solving the governing equations a structured mesh generator was used to describe the collapse of highly deformed bubbles with the Arbitrary Lagrangian Eulerian (ALE) method being employed in order to capture the transient bubble boundary effectively. In order to check the accuracy of the present FE analysis we compared the results of our FE solutions with the result of the collapse of spherical bubbles in a large body of fluid in which solutions can be obtained using a 1D FE analysis. It has been found that 1D and 2D bubble deformations are in good agreement for spherically symmetric problems confirming the validity of the numerical code. Non-spherically symmetric problems were also solved for the collapse of bubble located near a plane solid wall. We have shown that a microjet develops at the bubble boundary away from the wall as already observed experimentally. We have discussed the effect of Reynolds number and distance of the bubble center from the wall on the transient collapse pattern of bubble.

• Korea-Australia Rheology Journal
• /
• 제16권1호
• /
• pp.47-54
• /
• 2004

Low Reynolds number, dilute, and surfactant-free bubble suspensions are prepared by mechanical mixing after introducing carbon dioxide bubbles into a Newtonian liquid, polyol. The apparent shear viscosity is measured with a wide-gap parallel plate rheometer by imposing a simple shear flow of capillary numbers(Ca) of the order of $10^{-2}$ ~ $10^{-1}$ and for various gas volume fractions ($\phi$). Effects of capillary numbers and gas volume fractions on the viscosity of polyol foam are investigated. At high capillary number, viscosity of the suspension increases as the gas volume fraction increases, while at low capillary number, the viscosity decreases as the gas volume fraction increases. An empirical constitutive equation that is similar to the Frankel and Acrivos equation is proposed by fitting experimental data. A numerical simulation for deformation of a single bubble suspended in a Newtonian fluid is conducted by using a newly developed two-dimensional numerical code using a finite volume method (FVM). Although the bubble is treated by a circular cylinder in the two dimensional analysis, numerical results are in good agreement with experimental results.

• 설비공학논문집
• /
• 제17권1호
• /
• pp.8-15
• /
• 2005

This study concerns the characteristics of helical flow in a concentric and eccentric annulus with a diameter ratio of 0.52 and 0.9, whose outer cylinders are stationary and inner ones are rotating. Pressure losses and skin friction coefficients have been measured for fully developed flows of water and $0.2\%$ aqueous of sodium carboxymethyl cellulose(CMC), respectively, when the inner cylinder rotates at the speed of $0\~500$ rpm. The effect of rotation on the skin friction coefficient is significantly dependent on the flow regime. In all flow regimes, the skin friction coefficient is increased by the inner cylinder rotation. This study shows the change of skin friction coefficient and wall shear stress corresponding to the variation of rotating speed of the inner cylinder, radius ratio, eccentricity, and working fluids.