• 제목/요약/키워드: NewWave

검색결과 2,154건 처리시간 0.026초

유선추적법(流線追跡法)에 의(依)한 Liner 선형(船型)의 개량(改良) (A Study on Source Generated Ships of Minimum Wave-Resistance)

  • 조규종;홍성완
    • 대한조선학회지
    • /
    • 제7권2호
    • /
    • pp.41-60
    • /
    • 1970
  • Despite it's limitations, the existing Stream Line Tracing Method(Inverse Method) can be applied effectively to the design of better hull forms with practical proportions. Most of the calculating mechanism by the method for hull form design has been achieved. In this paper, authors have tried to improve the quality of wave making resistance on the 10,000GT liner among FY'67 Korean Standard Ship Form. Some numerical results obtained in this work and designed new lines are shown.

  • PDF

BEM과 VOF법을 결합한 수치모델의 개발과 그 타당성 검토 (Development and verification of a combined method of BEM and VOF)

  • 김상호;야마시로;요시다;하시모토;이중우
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 추계학술대회 논문집
    • /
    • pp.153-159
    • /
    • 2005
  • 최근의 해안, 해양공학의 수치해석 기술은 구조물이 있는 영역에서의 파동을 계산하기 위해 Navier-Stokes방정식을 기초로 한 많은 수법들이 개발되고 발전되어 왔다. 이들 중, 파랑의 쇄파현상등의 복잡한 파동현상을 재현할 목적의 수치해석 기법으로 Volume Of Fluid method (보프법)에 근거를 둔 수치해석 기법이 자주 사용되어지고 있다. 그러나 보프법은 일반적으로 방대한 계산시간과 기억용량이 필요로 하다는 단점을 가지고 있어, 보프법의 단독 수법으로는 적어도 100주기 이상의 계산시간을 통한 해석이어야만 만족할 만한 결과가 나타나는 불규칙파랑에 대한 해석이 현실적으로 어렵다는 단점이 있다. 한편, 완전유체로 가정할 경우, 경계요소법(BEM)으로 파랑을 신속하고, 정확하게 개산할 수 있으나, 비선형 현상을 재현할 수 없는 단점이 있다. 본 연구는 불규칙파랑을 대상으로 하고, 구조물이 있는 경우의 파동현상도 계산이 가능한 수치 해석 기법의 개발을 목표로 하고 있다. 이를 위해, 두 수법의 장점을 살려 쇄파현상등이 있어 비선형 현상의 재현이 요구되는 영역에서는 보프법을 사용하여 계산하고, 비선형성을 무시할 수 있어 포텐샬 이론이 적용 가능한 구간에서는 BEM을 사용하여 계산을 하도록 두 수법을 연결한 BEM-VOF model을 개발하였다. 개발된 수치모델의 검증으로는 5차 스톡스파의 파랑전파 및 불규칙파랑의 전파를 통해 수행하였다.

  • PDF

EXACT SOLUTIONS OF THE MDI AND SAWADA-KOTERA EQUATIONS WITH VARIABLE COEFFICIENTS VIA EXP-FUNCTION METHOD

  • Zhang, Sheng;Abdou, M.A.
    • Journal of applied mathematics & informatics
    • /
    • 제28권1_2호
    • /
    • pp.143-152
    • /
    • 2010
  • Based on the Exp-function method and a suitable transformation, new generalized solitonary solutions including free parameters of the MDI and Sawada-Kotera equations with variable coefficients are obtained, form which solitary wave solutions and periodic solutions including some known solutions reported in open literature are derived as special cases. The free parameters in the obtained generalized solitonary solutions might imply some meaningful results in the physical models. It is shown that the Exp-function method provides a very effective and important new method for nonlinear evolution equations with variable coefficients.

전력용 MOSFET을 이용 삼상 정현파 PWM인버터의 변조신호에 관한 연구 (A study on Modulating signal for Three-phase sinusodial PWM Inverter using Power MOSFET)

  • 전희종;엄상오;문학룡;강범구
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1991년도 추계학술발표회논문집
    • /
    • pp.75-79
    • /
    • 1991
  • In this study, a new sinusoidal PWM inverter suitable for use with power MOSFETs is described. The output waveforms in the proposed OWM inverter are investigated both theoretically and experimentally. A modulating signal for the three-phase PWM inverter is obtained by adding 3nth harmonics to the conventional three-phase sine wave. By using the new modulating signal, the amplitude of the fundamental component is increased about 15 percent more than that of a conventional sine wave inverter and the commutation number of the inverter is decreased to two-thirds of a conventional one.

  • PDF

휠터를 사용하지 않는 주파수 2체배기에 관한 연구 (A Study on Filterless Frequency Doubler)

  • 김경희
    • 대한전자공학회논문지
    • /
    • 제16권6호
    • /
    • pp.31-39
    • /
    • 1979
  • 본 연구에서는 주파수 체배기의 공통점을 종합하여 "시 불변 시스템(time invarient system)에서 입력 파형이 반파대칭 특성을 가질 때, 출력이 입력의 우함수로 표시 된다면 출력 주파수는 입력 주파수의 체배가 된다." 추정 하였으며 이를 증명 하였고, 추정한 이론에 의해서 부저항을 이용한 광대역 구형파 주파수 2체배기를 제안 하였다.

  • PDF

Analysis and Design of an Improved UHF Amplifier

  • 강창언
    • 대한전자공학회논문지
    • /
    • 제15권3호
    • /
    • pp.24-29
    • /
    • 1978
  • 사이크로트론파와 전자속파의 결합에 의한 신형모드의 동작이 관찰되었다. 전파형성 과정을 분석하는 데 전자동력학과 결합모드에 의한 방법이 적용되었으며 유도된 이론적 이득식에서 신형초고주파 증폭기가 설계 제작 되었으며 실험결과잡음이 없이 고전력을 얻을 수 있는 증폭기임이 보여진다.

  • PDF

S-자형 플랩을 이용한 충격파와 경계층 간섭현상 제어에 관한 연구 (Control of Shock Wave/Boundary-Layer Interactions Using S-Shaped Mesoflaps)

  • 이열
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.159-160
    • /
    • 2002
  • New S-shaped aeroelastic mesoflaps are utilized to control normal shock/boundary-layer interactions. New generation of the mesoflaps is designed f3r a better rigidness and a good flow uniformity across the ulteractions. ,Major advantages of the mesoflap system can be a better total pressure recovery downstream of the interactions due to the lambda shock structure over the flap system, and a rehabilitation of the thickened boundary layer due to bleeding through a cavity underneath the flap system. Skin friction has been measured downstream of the interactions, using the laser interferometer skin friction (LISF) meter, which optically detects the rate of thinning of an oil film applied to the test surface. Various flap-thicknesses of the S-shaped mesoflap arrays are tested, and the results are compared to the solid-wall reference case. Overall, not much difference in the level of skin friction is noticed for the S-shaped flap arrays of various thicknesses, and its level is lower than the skin friction downstream of the solid-wall interaction

  • PDF

A New Unity Power Factor Rectifier System using an Active Waveshaping Technique

  • Choi, Se-Wan;Bae, Young-Sang
    • Journal of Power Electronics
    • /
    • 제9권2호
    • /
    • pp.173-179
    • /
    • 2009
  • This paper proposes a new three-phase diode rectifier system with a sinusoidal input current at unity power factor and a regulated and isolated output voltage at low level. The inherent natural wave-shaping capability of the reduced kVA polyphase transformer together with an active current wave-shaping technique results in a significant reduction of input and output filter requirements associated with switching ripple and EMI. The operation principles are described along with a design example and a comparative evaluation. Experimental results on a 1.5kW prototype are provided to validate the proposed concept.

24시간 HOLTER ECG에서 QT interval 분석을 위한 새로운 Algorithm에 관한 연구 (A New algorithm for at interval analysis in 24 hour Holter BCG)

  • 윤형로;이윤선;이경중
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1989년도 춘계학술대회
    • /
    • pp.13-14
    • /
    • 1989
  • Prolongation in QT corrected interval (QTc), measured in surface ECG, has been shown in the majority af patients to be marker of bad prognosis in postmyocardial infarction patients (PMIP). Hence it would seem logical that dynamic QTc interval measurement can be a very usefull indicator to stratify prognosis in PMIP. We present a new algorithm for QT as well as for QTP (distance value from Q wave onset to T wave peak) intervals measurement in 24 hour ECG Holter tapes. Validation of the algorithm by hand measurement has been done on first beats of 18 Holter tapes, resulting in a magnitude of deviations between 10 and 15 ms. Application on 24 hour Holter ECG signal has also been done.

  • PDF

새만금 방조제 물막이 구간 주변에서의 지형변화예측(수공) (Time Dependent Morphological Changes around the Closure Gap in Saemankeum)

  • 박영욱;어대수;박상현
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2000년도 학술발표회 발표논문집
    • /
    • pp.365-370
    • /
    • 2000
  • Sea dike construction for the tidal flat reclamation works in estuary and coast may change the characteristics of tidal motion and wave conditions in the region. In turn, a new hydraulic condition provides the impacts on sediment transport pattern and forms a new morphological environment. Also, morphological changes during the closure works of sea dike are closely related with a safy of sea dike. Therefore, the prediction of morphological changes is required secure the safe closure work and the economic design of sea dikes. To investigate morphological changes due to sea dike construction, hydrodynamic changes of tides and waves have to be evaluated, then sediment transport and sea bottom changes are computed. Mathematical modelling is required for representation of interrelation of tidal motion, wave and sediment transport. In this study, numerical model MORSYS is applied to compute the hydrodynamics and morphological changes around the closure gap for Saemankuem dike. This model allows a flexible integration of the module for waves, currents, sediment transport and bottom changes.

  • PDF