• 한국수소및신에너지학회논문집
• /
• 제19권5호
• /
• pp.453-459
• /
• 2008

In general, reliability of AHP depends on pairwise comparison of evaluators. In addition, human judgment on the importance of alternatives or criteria is always imprecise and vague. The Fuzzy AHP technique is suggested and used widely recently. In this paper, we prioritize future energy technology development for well focused R&D. We selected 3 criteria and 10 sub-criteria. According to the result in this study, the most important sub-criterion is the precedence over other competitive technology, the second is the possibility for fundamental technology acquisition, and the third is the improvement energy efficiency. The other side, the lowest important sub-criterion is the technology level compared with advanced countries.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.25-29
• /
• 2016

The semiconductor industry has been developed mainly by micronization process due to many advantages of miniaturization of devices. Mass production of semiconductors of 10 nm class has been started recently, and it is expected that the technology generation of 5 nm & 7 nm technology will come. However, excessive linewidth reduction affects physical limits and device reliability. To solve these problems, new process technology development and new concept devices are being studied. In this review, we introduce the next generation technology and introduce the advanced research for the new concept device.

• Computers and Concrete
• /
• 제3권2_3호
• /
• pp.91-102
• /
• 2006

To place concrete overlays has become a standard application in the strengthening and rehabilitation of concrete structures such as bridges, tunnels, parking decks and industrial buildings. In general, connectors are used to ensure a monolithic behavior of the two concrete layers. Within the framework of the development of a new connector wedge splitting tests and shear tests were performed, in addition nonlinear finite element analyses were applied to investigate the load transfer behavior of the connectors for different prototypes. The numerical simulation results were compared to experimental data. The computed load-displacement curve demonstrates good correspondence with the curves obtained in the experiments, and the experimental crack patterns are reasonably simulated by the computed crack propagation. Both numerical and experimental investigations on the wedge splitting test and on the shear test served as basis for the development of new type of connectors.

• 복식
• /
• 제59권4호
• /
• pp.111-125
• /
• 2009

The period from the early years of the 21st Century, when the birth of Digital Clothing received as a kind of digital cultures in the modern information society, to the present time, the period is studied on as a social transition in the revolutionary digital technology in parallel with the fashion changes which have an effect on our thoughts and our life style. After the 2000's, when digital was perceived as a culture, information technology came into being owing to the technological development in the network and informative and communicative technology. This study tried to grasp the tendency of the times to Digital Clothing, which occurred in the new situation of Digital Technology, and then on the base of it, tried to classify the expressive characteristics in the Digital Clothing as the Cyberspace, Global Network, high functionality Smart Textiles and digital technology. The social reformation by the revolutionary digital technology is coming forth in the New Fashion of the digital Clothing, with the development of technology and network in the Cyberspace and real space. the Digital Clothing which led to the revolutionary change in New Fashion occurred, and by the same time, gradually the phenomena of Digital Consuming Culture is expansive.

• 한국위성정보통신학회논문지
• /
• 제4권2호
• /
• pp.1-4
• /
• 2009

본 논문에서는 우주기술과 정보기술 융합이 단순한 화두가 아니라 우리나라 신성장동력 엔진의 키워드로 자리매김 할 수 있도록 ST-IT 융합기술이 무엇이고, 우리나라의 ST 및 IT 기술현황을 소개한다. 향후 ST-IT 융합기술의 발달에 따라 기술 및 산업 간의 벽이 허물어지고 새로운 가치와 시장이 창출되는 등 역동적인 변화가 예상되기 때문에 향후 ST-IT 융합기술 발전 방향을 제시하고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.401-406
• /
• 2003

New planar discharge structured AC-PDP has been developed by using TFCS (Thick Film Ceramic Sheet) technology. By applying TFCS to AC-PDP, a sustaining electrode and scanning electrodes are embedded in the TFCS. It is shown that panel performances such as electrical and optical characteristics are superior to commercialized coplanar AC-PDP as well as cost reduction. Moreover the experimental result shows panel performances can be improved drastically by continuous development.

• 서비스연구
• /
• 제10권4호
• /
• pp.101-125
• /
• 2020

본 연구는 선행연구에서 정립된 신경영 프레임워크에 기반을 둔 경영기술 모델을 도출하기 위해 수행되었다. 기존 경영학의 대부분을 차지하는 분야인 경영기술 부문은 신경영학에서는 기술적인 부문으로 정의된다. 본 연구에서는 경영프로세스, 경영기능, 경영확장 등 3부문으로 구성되는 경영기술 부문을 정의하고, 서비스경제시대의 새로운 경영학 관점에서 경영기술 이론을 도출하였다. 즉 서비스경제시대의 서비스철학에 기반을 둔 경영기술 이론을 제시하였다. 기존 경영학 체계와는 구조가 다른 경영기술 이론이 제시되었다. 새로운 경영기술 모델은 수평적 체계의 동태적 모델로 구축되었다. 본 연구에서는 새로운 경영기술의 기반이 되는 신경영학의 구조를 먼저 제시하고, 경영이 수행되는 서비스경제시대의 서비스철학을 제시한 후, 서비스철학에 기반한 경영기술 모델을 제시하였다. 경영기술 모델은 불변의 공리에 기반하여 도출되었다. 인류공통사상 및 자연과 인간의 본질을 토대로 새로운 경영의 공리를 제시한 후 각 공리를 근거로 경영기술 모델을 제시하였다. 공리를 토대로 서비스철학의 구조와 운용 모델에 기반하여 각 주제별로 상반되는 두 대립자 간의 치열한 상호작용과 팽팽한 균형이 유지되는 변증법적 발전 모델이 새로운 경영기술 모델로서 도출되었다. 전체적인 조직 경영 모델과 함께 경영기능 모델, 경영확장 모델을 제시하였다. 각 세부 기술은 상반되는 대립자들의 변증법적 발전 모델로 제시되었다. 경영기술은 계속 변화하는 동태적인 기술이며 여러 가지 상황과 시점을 고려하는 전체적인 기술이다. 본 연구는 기존의 정태적 경영기술의 한계를 극복하고 동태적 경영기술을 발전시키기 위한 기초 연구로서 의의를 가진다. 향후 연구는 새로운 경영기술 모델에 대한 실증적 분석적 연구들이 필요하다. 본 연구를 실용적인 모델로 발전시키고 검증하는 연구들이 필요하다.

• International Journal of Knowledge Content Development & Technology
• /
• 제12권3호
• /
• pp.19-29
• /
• 2022

The new age is characterised by information communication technology, where computers, laptops, mobile gadgets such as palmtops, tablets, mobile phones and the internet have made their way to every sphere of life from our domestic environments such a homes, small retail shops, banks to large industries and the world at large. Over time, so many questions about the ethical use of Information and Communication Technology (ICT) have emerged on who has access to what technology and the use of it and like every other technological invention. This paper will look at the morality involved in making use of ICT to promote ethical use of data or information in a virtual environment. ICT also possesses both positive and negative impacts; the questions that these impacts raise are what this piece attempts to answer, providing global scrutiny to these ethical issues, situations and questions; and providing recommendations in line with global best practices.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1597-1602
• /
• 2012

In this study, we determined the 3D-structure of Arabidopsis thaliana KAPAS by homology modeling. We then investigated the binding mode of compounds obtained from in-house library using computational docking methods. From the flexible docking study, we achieved high dock scores for the active compounds denoted in this study as compound $\mathbf{3}$ and compound $\mathbf{4}$. Thus, we highlight the flexibility of specific residues, Lys 312 and Phe 172, when used in active sites.

• 지식경영연구
• /
• 제5권2호
• /
• pp.25-51
• /
• 2004

The purpose of this study is to investigate the knowledge creating pattern of technology catching-up and pioneering phase in the new product development process. This paper first reviews the knowledge conversion, absorptive capability, learning orientation and the trigger of learning. The paper then presents the integrative model of knowledge creating. Based on the integrative model, in-depth case analysis was conducted on the new product development process in Phicom. As a result, the paper discuss that the pattern of absorptive capability building, knowledge conversion and knowledge transfer is different from technology catching-up and pioneering phase. Finally, the implications and limitations of the study are discussed.