• 한국수소및신에너지학회논문집
• /
• 제28권6호
• /
• pp.642-648
• /
• 2017

The use of fossil is causing enviromental all over the world. So hydrogen energy is attracting attention as one of the alternative. The government announced that 30% of the air pollution is because of the Internal Combustion Engine Vehicle. In addition, they plans to reduce Internal Combustion Engine Vehicles by 2030 and increase (electric vehicles, EV) or (fuel cell vehicle, FCV). The FCV is evaluated as a next-generation green car because it has a long driving distance and short charging time. However, the hydrogen industry is not able to expand due to the lack of refueling infrastrucutre. This paper predicts the site of hydrogen refueling stations for the expansion of the hydrogen industry and proposes a method to supply hydrogen multi energy filling stations.

• 한국지역지리학회지
• /
• 제16권6호
• /
• pp.689-705
• /
• 2010

본 연구는 대구경북에 소재한 친환경에너지기업을 사례로 입지현황 및 집적 특성을 클러스터 관점에서 분석해 봄으로써 친환경에너지산업육성을 위한 정책입안의 대안적 기초자료를 제공하고자 시도되었다. 주된 자료는 2010년 6월 21일에서 7월 23일에 걸쳐 기업체와 환경전문가를 대상으로 한 설문조사의 결과이다. 대구경북의 친환경에너지기업은 주로 경북의 포항과 구미, 대구의 달서구에 집적되어 있다. 대경권 친환경에너지기업 존립기반의 핵심적 요소는 지역 내 대기업의 입지와 동종기업의 기술적, 지리적 근접성을 들 수 있다. 즉 대경권은 대기업이 신재생에너지를 신수종사업으로 채택하고 설립한 기업이 중심이며 주된 입지요인은 관련 원자재 확보보다는 교통 및 통신의 편리성, 지역 수요자의 높은 품질 기대 수준, 기술적, 지리적 근접성, 지역 동종기업과 경쟁이며, 현재 애로사항으로는 기술 및 연구개발 금융지원과 전문인력 양성 지원이었다. 향후 대경권 친환경에너지산업의 정책에 있어서는 종래의 인프라 구축지원 혹은 세제 혜택 등에 초점을 맞춘 지원 정책에서 과감히 탈피하여 기업수요에 기반한 기술개발 관련 금융지원, 지역 전문인력양성 및 종사자 재교육 프로그램도입과 친환경에너지산업 분야의 정책과제 발굴에 대경권 친환경에너지산업 육성정책의 초점을 두어야 할 것이다.

• 한국태양에너지학회 논문집
• /
• 제39권6호
• /
• pp.1-13
• /
• 2019

With the adoption of the Paris Agreement, a new climate regime is intensifying the global interest in reducing greenhouse gas emissions. In the meantime, Korea is preparing to introduce a new renewable energy carbon certification system in order to activate the use of renewable energy and to reduce carbon emissions in the entire life cycle of manufacturing and disposal of renewable energy facilities. Therefore, this study aims to identify the implications for the introduction of the carbon certification system and to establish a theoretical basis for the system design by examining the status of overseas carbon certification, international trade norms and trade disputes. As a result, carbon emissions certification is being implemented in developed countries such as EU, UK, France, USA and Japan, but only France, Germany and EU have adopted carbon certification for renewable energy sector. The analysis of the WTO TBT Agreement and GATT also confirmed the possibility of a violation of the international trade rules of the carbon certification system and derived nine international technical standards related to carbon certification. Finally, by examining the case of trade disputes related to environmental labeling, the minimum requirements to be considered at the institutional design stage were drawn to eliminate the possibility of trade disputes.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.314-319
• /
• 2009

The photovoltaic(PV) industry has been growing worldwide. Recently, the PV industries not also in the traditional PV advanced countries but also in other countries are rapidly growing. Especially, China has become the largest supplier in the world PV supply side since 2007. Both the world PV supply and demand rose steadily in 2008 like recent bumper years. In 2008, the world solar cell production reached 6.85GW~7.91GW presenting growth of 85% over the previous year. On the demand side, 81 countries contributed to the 5.95GW presenting growth of 110% over the previous year.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.98-104
• /
• 2013

At the moment, in Korea, over 90% of energy resources depend on imports, and nearly 60% of electric energy is produced using fossil fuel. Therefore, the government adopted the Climatic Change Convention and has implemented the RPS system since 2012 to actively cope with the dependence on imported energy, and to grow and expand the new renewable energy industry. This study examined the performance results of mandatory supply of solar photovoltaic energy and non-solar photovoltaic energy assigned to providers and the present state after implementation of the RPS system. As a result, the achievement rate in 2012 was 64.7%. Especially, solar photovoltaic energy showed a high achievement rate of 95.7%, whereas non-solar photovoltaic energy showed a low achievement rate of 63.3% due to several problems and was highly dependent on the government. In 2013, the burden of each provider has increased due to more mandatory supply and addition of unfulfilled supply of 2012, and the separate mandatory supply of solar photovoltaic energy established for protection of the solar photovoltaic market is restricting investment. Therefore, there is a need to assign mandatory supply in consideration of the available amount of each new renewable energy.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.51-56
• /
• 2016

The most widely used glue in a corrugator is starch, which is a natural polymer. This material needs thermal energy to achieve a binding force, so a heating section is installed in a corrugator. However, this heating section can cause quality problems in linerboards and corrugating medium and increase the production cost because of the high cost of fossil resources. Therefore, a new adhesive that provides the binding force at lower temperatures than the conventional one must be developed. In this study, SB-latex was selected as a co-adhesive and added to the starch solution. The addition of the SB-latex was determined based on the viscosity of the new adhesive. The adhesive strength and the drying energy reduction of a corrugated board were measured to evaluate the functionalities of the new adhesive. The addition of SB-latex was determined to be under 20% of the oven-dried starch based on the viscosity of the new adhesive. The adhesive strength was improved and the drying energy was reduced by applying the new adhesive.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2660-2666
• /
• 2020

Korea successfully achieved energy independence in the shortest period of time from being the poorest country in terms of energy 50 years ago through steady development of nuclear technology. In the past, the nuclear industry has been driven through government-centered policy development, public institution-based research, and industrial facility and infrastructure construction. Consequently, South Korea became a nuclear energy powerhouse exporting nuclear power plants to the UAE, surpassing the level of domestic technological independence. However, in recent years, the nuclear industry in Korea has experienced a decline in new plant construction since the Fukushima accident in Japan, which caused changes in public perspectives regarding nuclear power plant operation, more stringent safety standards on the operation of nuclear power plants, and a shift in governmental energy policy. These changes are expected to change the domestic nuclear industry ecosystem. Therefore, in this study, we investigate the priority of technology development investment from the perspective of experts in private nuclear power companies, shifting the focus from government-led nuclear R&D policies. To establish a direction in nuclear technology development, a survey was conducted by applying an analytic hierarchy analysis to experts who have worked in nuclear power plants for more than 15 years. The analysis items of focus were the 3 attributes of strategic importance, urgency, and business feasibility of four major fields related to nuclear energy: nuclear safety, decommissioning, radioactive waste management, and strengthening industrial competitiveness.

• 집단에너지
• /
• 통권1호
• /
• pp.16-19
• /
• 2005

• 융합정보논문지
• /
• 제8권6호
• /
• pp.389-397
• /
• 2018

최근 셰일가스 개발이 확대됨에 따라 셰일가스 생산의 증대로 에너지 시장이 변화되고, 전통에너지 플랜트 설비 축소로 이어지게 됨에 따라 국내 주조 밸브 산업의 경영악화를 극복하고 확대되는 셰일가스 플랜트 진입을 위하여 관련업계 전문가 설문조사와 선행연구를 바탕으로 2차 설문을 통하여 SWOT 요인을 확정하고자 하였다. 강점활용전략으로 국내플랜트사와의 협업 외 3가지 요인을 제시하고, 약점보완전략으로 셰일가스플랜트에 특화된 제품개발 외 4가지 요인을 결과로 제시하였다. 본 연구는 업계의 새로운 에너지설비시장 진입을 위해 내외부 환경요인 분석 및 전략수립을 제언한 것으로 학문적, 실무적인 시사점을 제공한다. 향후 본 연구에서 도출된 전략에 대한 중요도를 분석하고, 중요도의 순위에 따라 기업에 미치는 영향에 대해 연구 하고자 한다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2723-2733
• /
• 2023

Transuranic nuclides (such as ²³⁸Pu, ²⁵²Cf, ²⁴⁹Bk, etc.) have a wide range of application in industry, medicine, agriculture, and other fields. However, due to the complex conversion chain and remarkable fission losses in the process of transuranic nuclides production, the generation amounts are extremely low. High flux reactor with high neutron flux and flexible irradiation channels, is regarded as the promising candidate for producing transuranic nuclides. It is of great significance to increase the conversion ratio of transuranic nuclides, resulting in higher efficiency and better economy. In this paper, we perform an optimization design evaluation of producing transuranic nuclides in high flux reactor, which includes optimization design of irradiation target and influence study of reactor core loading. It is demonstrated that the production rate increases with appropriately determined target material and target structure. The target loading scheme in the irradiation channel also has a significant influence on the production of transuranic nuclides.