• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.87-92
• /
• 1998

A nonlinear iterative scheme developed to reduce the computing time of the AFEN method was tested and applied to two benchmark problems. The new nonlinear method for the AFEN method is based on solving two-node problems and use of two nonlinear correction factors at every interface instead of one factor in the conventional scheme. The use of two correction factors provides higher-order accurate interface noes as well as currents which are used as the boundary conditions of the two-node problem. The numerical results show that this new method gives exactly the same solution as that of the original AEFEN method and the computing time is significantly reduced in comparison with the original AFEN method.

• 마이크로전자및패키징학회지
• /
• 제15권3호
• /
• pp.19-25
• /
• 2008

본 논문에서는 고역률과 고효율로 동작하는 새로운 스텝-업 AC-DC 초퍼에 대해 제안한다. 제안한 초퍼는 전류 불연속제어로 구동되고, 스위치의 듀티율 일정제어에 의해 입력전류는 교류 입력전압의 크기에 비례된 불연속적인 정현파 형태로 주어진다. 그 결과 입력역률은 거의 단위역률로 되고, 듀티율 일정제어에 의해 제안한 초퍼는 제어기법이 간단하게 된다. 일반적으로 전류불연속 제어에 의한 초퍼의 경우, 사용된 스위치의 턴-온 동작은 영전류 스위칭으로 되는 장점이 있지만, 스위치의 턴-오프 동작은 최대 전류에서 스위칭되어 스위칭 손실을 증대시키고 스위치의 과중한 스트레스를 가져오게 된다. 이것은 AC-DC 초퍼의 효율을 저하시키는 요인이다. 본 논문에서는 부분공진기법에 의한 새로운 소프트 스위칭 회로가 설계되어 사용된 제어스위치들의 턴-온, 턴-오프 동작을 소프트 스위칭으로 만들어 초퍼의 효율을 증대시킨다.

• 수산해양교육연구
• /
• 제9권2호
• /
• pp.209-221
• /
• 1997

This paper presents a soft switching unity power factor PWM rectifier, which features reduced conduction losses and soft switching with no auxiliary switches. The soft switching are achieved by using a simple commutation circuit with no auxiliary switches, and reduced conduction loses are achieved by employing a single converter, instead of a typical front end diode rectifier followed by a boost rectifier. Furthermore, thanks to good features such as simple PWM control at constant frequency, low switch stress and low VAR rating of commutation circuits, it is suitable for high power applications. The principle of operation is explained in detail, and major characteristics analysis and experimental results of the new converter also included.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.173-179
• /
• 2009

This paper proposes a new three-phase diode rectifier system with a sinusoidal input current at unity power factor and a regulated and isolated output voltage at low level. The inherent natural wave-shaping capability of the reduced kVA polyphase transformer together with an active current wave-shaping technique results in a significant reduction of input and output filter requirements associated with switching ripple and EMI. The operation principles are described along with a design example and a comparative evaluation. Experimental results on a 1.5kW prototype are provided to validate the proposed concept.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.869-878
• /
• 2007

In this paper a new process capability index $C_{psks}$ is introduced for non-normal process. $C_{psks}$ that is proposed by transformation of the $C_{psks}$ incorporates an additional skewness correction factor in the denominator of $C_{psks}$. The use of each technique is illustrated by reference to a distribution system which includes the Pearson and Johnson functions. Accordingly, $C_{psks}$ is proposed as the process capability measure for non-normal process.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.291-294
• /
• 1998

This paper presents a new active power filter with low DC voltage for compensating reactive power and harmonics of three-phase high power/voltage harmonic producing load. It has a structure of converter connected in series with power factor correction capacitor. Appropriate size and number of filter capacitor are determined by an equation and applied to simulation of 10kvar 6-pulse SCR rectifier.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.293-301
• /
• 2011

This paper presents a novel theoretical method based on power analysis to obtain voltage reference values for an inverter-based compensator. This type of compensator, which is installed in parallel with the load, is usually referred to as the active filter. The proposed method is tailored to design the compensator in such a way that it can simultaneously balance the asymmetric load, as well as correct the power factor of the supply side. For clarity, a static compensator is first considered and a recursive algorithm is utilized to calculate the reactance values. The algorithm is then extended to calculate voltage reference values when the compensator is inverter based. It is evident that the compensator would be asymmetric since the load is unbalanced. The salient feature associated with the proposed method is that the circuit representation of system load is not required and that the load is recognized just by its active and reactive consumptions. Hence, the type and connection of load do not matter. The validity and performance of the new approach are analyzed via a numerical example, and the obtained results are thoroughly discussed.

• 한국IT서비스학회지
• /
• 제18권4호
• /
• pp.67-82
• /
• 2019

The purpose of this study is to improve the calculation method of the software operation pricing proposed by the software business price calculation guide from 'input manpower method' to 'rate calculation method'. The software operation pricing of the input manpower method is not objectively calculated in the domestic IT outsourcing situation where the statistical data based on the activity based estimating is insufficient and it is decided by agreement between the owner and the client. In addition, there was no standard for adjusting the productivity according to the characteristics of the operation service. In order to improve this, an operational correction factor item that can affect the software operation productivity was selected based on foreign and domestic standards, and it was confirmed through the first questionnaire to IT operation managers. In order to determine the level of difficulty of the fixed operational correction factors, the operational correction factor using AHP technique was confirmed through a second questionnaire for pairwise comparison. The operational difficulty calculation table was developed with reference to COCOMO and ITIL standards. Finally, we propose a new pricing scheme that reflects the operating rate. Regression analysis was carried out by collecting the data of the domestic public institutions on the estimated cost and the actual cost calculated from the new rate method software operation pricing. The results of the regression analysis show that the estimated cost and the actual cost are related to each other. Mean magnitude of relative error(MMRE) and PRED[25] analysis were added for accuracy analysis. MMRE and PRED also showed satisfactory results, confirming the possibility of replacing the rate method software operation pricing.

• 한국해안해양공학회지
• /
• 제15권2호
• /
• pp.108-115
• /
• 2003

천수방정식에 기초한 ADCIRC 유한요소모형을 이용하여 지진해일 전파를 수치모의할 때 분산효과를 고려하기 위한 두 가지 일차원 분산보정기법을 개발하였다. 첫 번째 방법은 음해법으로, 각 시간단계의 공간미분항에 부여되는 가중치를 조정함으로써 분산보정을 수행한다. 두 번째는 양해법으로, 유한요소의 크기를 조정하여 분산을 고려한다. 새로운 기법을 이용하여 계산한 수치해와 파의 분산효과를 고려한 해석해의 비교를 통해 본 연구에서 제안한 분산보정기법의 타당성을 확인하였다.

• Journal of the Korean Physical Society
• /
• 제73권12호
• /
• pp.1814-1820
• /
• 2018

With the publication of TRS-483 in late 2017 the IAEA has established an international code of practice for reference dosimetry in small and non-standard fields based on a formalism first suggested by Alfonso et al. in 2008. However, data on beam quality correction factors ($k^{f_{msr},f_{ref}}_{Q_{msr},Q_0}$) for the Leksell Gamma $Knife^{(R)}$ $Perfexion^{TM}$ is scarce and what little data is available was obtained under conditions not necessarily in accordance with the IAEA's recommendations. This study constitutes the first systematic attempt to calculate those correction factors by applying the new code of practice to Monte Carlo simulation using the GEANT4 toolkit. $k^{f_{msr},f_{ref}}_{Q_{msr},Q_0}$ values were determined for three common ionization chamber detectors and five different phantom materials, with results indicating that in most phantom materials, all chambers were well suited for reference dosimetry with the Gamma $Knife^{(R)}$. Similarities and differences between the results of this study and previous ones were also analyzed and it was found that the results obtained herein were generally in good agreement with earlier PENELOPE and EGSnrc studies.