• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.44-49
• /
• 2008

This study uses contingent valuation method (CVM) to elicit willingness to pay monthly for electricity or heating produced by renewable energy (RE). The experts who participated in the conference of the Korean Society for New and Renewable Energy in May of 2008 were asked to answer the questionnaires: how much would you be willing to pay monthly to receive electricity (or heating) generated by RE? We find some evidence that the respondents have higher willingness to pay for RE electricity than RE heating even if the average electric bills were lower than the heating bills. The respondent who belongs to a large family and has a good opinion of RE tends to show high willingness to pay for both RE electricity and RE heating.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.9
• /
• pp.1333-1342
• /
• 2013

New & renewable energy becomes a crucial subject to solve the problems inherent in the current energy resources, which results in the fast development of the new & renewable energy industry worldwide. However, not only its base is still weak but the high initial investment for technology development and certain scale of an energy market are required in many cases. For this reason, many countries in the world, including Korea, run the energy policies to foster the new & renewable energy industry such as RSP and FIT. In general, a policy should be established to take various, intertwined interests as well as a number of variables related to economic, social, environmental, and international matters into comprehensive consideration. For new & renewable energy industry, there are many variables to be considered and indexes necessary for evaluation but it is hard to take all of them into account. Even though they were considered, no criteria are available for use in a consistent manner. Therefore, this study plans to develop an evaluation model for the Korean new & renewable energy policy.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.267-277
• /
• 2011

The study looks at the development of new & renewable technology in a latecomer country, Korea. The main question is whether the development is driven by 'green demand' from the people or by the 'growth demand' from the industry. It also asks what are the characteristics of socio-technical constituency behind the development of new & renewable energy technology; growth-centered or environment-centered. It is found out that a 'New & renewable energy technology socio-techical constituency', consisted of NGOs, industry and government in the form of membership to New & Renwable Energy Policy Council of the government program, was established driving the development of new & renewable energy technology development in Korea. Yet, the coalition among them was based on 'the desire for growth' rather than 'the concern for environment'. The changes in authoritarian development state such as the adoption of governance approach to public decision-making process also contributed to the formation of the constituency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.244-244
• /
• 2007

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.577-584
• /
• 2005

There are many activities involved in promoting renewable energy technologies. These include governments, the renewable energy manufacturing and service industries, energy supply companies, investors, researchers, non-government organizations and customers. For a sustainable renewable energy market, finding a promising industry is essential. The industry has made significant progress in recent years, considering the fact that today's renewable energy market is relatively small. This paper analyses the technology market of renewable energy, focusing on photovoltaic system, fuel cell, wind system. It appears that there has been remarkable progress in renewable energy systems. Besides, developed countries are effectively increasing the share of niche market and promoting renewable energy worldwide.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.8
• /
• pp.556-561
• /
• 2011

In this study, the theoretical maximum power of a heat engine was investigated by sequential Carnot cycle model, for a low-grade heat source of about $100^{\circ}C$. In contrast to conventional approaches, the pattern search algorithm was employed to optimize the two design variables to maximize power. Variations of the maximum power and the optimum values of design variables were investigated for a wide range of UA(overall heat transfer conductance) change. The results show that maximizing heat source utilization does not always maximize power.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.508-513
• /
• 2009

Significant air temperature increases in urban areas are known as the heat island phenomenon in a global scale. Therefore, we use numerical model in order to analyze quantitative effects by using new & renewable energy on the heat island phenomenon in urban area. The present study quantitatively analyzes the Urban Heat Island Effects, Energy-Saving Effects, and Environmental Load Decrease Effect along New and Renewable Energy Application which is 10% of the Building Energy Consumption.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.6
• /
• pp.27-36
• /
• 2018

Typical Meteorological Year Dataset is necessary for the renewable energy feasibility study. Since National Renewable Energy Laboratory has been built Typical Meteorological Year Dataset in 1978, gridded datasets taken from numerical weather prediction or satellite imagery are employed to produce Typical Meteorological Year Dataset. In general, Typical Meteorological Year Dataset is generated by using long-term in-situ observations. However, solar insolation is not usually measured at synoptic observing stations and therefore it is limited to build the Typical Meteorological Year Dataset with only in-situ observation. This study attempts to build the Typical Meteorological Year Dataset with satellite derived solar insolation as an alternative and then we evaluate the Typical Meteorological Year Dataset made by using satellite derived solar irradiance at Daejeon ground station. The solar irradiance is underestimated when satellite imagery is employed.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.5
• /
• pp.18-24
• /
• 2012

This study is to propose the quantitative methods instead of total results on New & Renewable energy R&D investments. To do that, this study used KETEP R&D investment profile, National R&D investment profile, and ISTANS industrial census results. From the analysis, this study firstly showed that the R&D investment on New&Renewable energy is higher than that of other industrial parts. And the investment increase ratio on New&Renewable energy is also very higher during past 10 years. And finally showed that the ripple effects(relatively the employee number, the amount of sales, and the amount of export) of the focus energy group including feul cell, photovoltaic, and wind power was higher than those of general manufacturing industry. This approach was firstly conducted using the poor census results, so other analysis methods will be developed and performed to exact;y show the investment ripple effect.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass