• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.49.2-49.2
• /
• 2011

본 논문에서는 대용량 태양광 PCS의 병렬운전 알고리즘에 대해 제안한다. 제안한 알고리즘은 dc-link 전압을 이용하여 PCS를 독립적으로 제어한다. 일반적으로 태양광 PCS는 정격용량 또는 그 근처에서 최대 효율을 낸다. 제안한 알고리즘은 일사량이 적을 시 일부 PCS만 작동하도록 하여 전력 변환 효율을 높인다. 항상 모든 PCS가 작동하는 것이 아니라 필요한 수량만 작동하도록 하고, 작동하는 PCS도 순차적으로 바꿔서, 전제 시스템의 수명을 늘리는 효과도 있다. 또한 일부 PCS가 고장이 날 경우 다른 PCS가 작동하도록 하여 태양광 발전이 멈추지 않고 계속 발전할 수 있도록 한다.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.84-87
• /
• 2018

As the propeller end speed increases, the propeller surface is damaged in the process of bubble formation and dropout. It is intended to prevent the corrosion of the propeller by modifying the shape of the end through the winglet structure to mitigate the cavitation phenomenon. In the case of conventional SUS materials, the cost of production is so high that plastic materials are used to prevent corrosion. This paper aims to mitigate the cavitation by deforming the shape of the end through the winglet structure by using the SMC composite material of the propeller using the existing SUS.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.460-463
• /
• 2008

A large part of the overall industrial energy is dissipated as waste heat despite of much development in the utilization of thermal energy. A mean efficiency is reported to be only around 30 to 35%. The existing waste heat recovery technology has reached its limit and consequently, the development of a new technology is necessary. Improving efficiency using thermoelectric technology has recently come into the spotlight because of its unique way to recover thermal energy. In fact, thermoelectric generator directly converts thermal energy into electric energy by a solid state without any moving parts. Futhermore remarkable improvement in the thermoelectric energy conversion efficiency has been achieved. In this study, a thermoelectric generator was made using commercialized thermoelectric modules. With thermoelectric modules attached on a duct surface, hot air was blown into the duct using a hot air blower. On the other side of the module, a water jacket was attached to cool the module. With different air inlet temperatures and water flowrates, the electrical power of the thermoelectric generator was measured.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.183.2-183.2
• /
• 2010

본 개발에서의 해상용 풍력발전기는 크게 허브와 블레이드를 합한 상부 구조물, 전기 발전기와 연결 조인트의 중간구조물, 각종 제어 장치가 들어있는 제어박스로 나누어진다. 상부 구조물은 Circular Hub 타입의 Darrieus 형상으로 양력(lift)을 이용한 회전력이 발생하며, Circular Hub 타입은 기존의 허브와 블레이드를 연결하여주는 암(arm)에 의해 유발되는 항력토크를 최소화 하기 위한 신개념 형상설계가 이루어 졌으며, 저속에서 우수한 회전특성을 가진다. 이는 바람을 받아 기계적 에너지로 전환 하는 역할을 하며, 풍력발전기의 성능에 직접적인 영향을 미친다. 중간구조물의 전기발전기는, 상부에서 발생된 기계적 에너지를 이용하여 전기적 에너지로 전환 하는 역할을 수행한다. 이렇게 전환된 전기적 에너지는 하부의 제어박스를 거쳐서 해상용 부이(buoy)의 하단에 위치한 베터리 뱅크로 전달, 저장되어 부이에서 쓰이는 전력을 충당하게 된다. 한편 본 개발은 풍력발전기의 공력하중 해석과 로터블레이드의 설계, 풍력발전기의 구조, 진동해석, MPPT 제어컨트롤러와 Breaking controller, 풍동 및 차량시험을 통한 성능평가 및 분석 등의 순으로 개발을 수행하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.133-133
• /
• 2009

연료전지는 연료의 화학적 에너지를 전기화학 반응을 통하여 직접 전기로 변환하기 때문에 에너지 전환효율이 높고 공해물질을 배출하지 않는 환경친화적인 고효율 발전방식으로, 특히 용융탄산염 연료전지(MCFC) 및 고체산화물 연료전지(SOFC)같은 고온형 연료전지의 경우 분산전원이나 중앙집중발전 같은 발전용에 적합한 연료전지로 평가받고 있다. 현재 MCFC 및 SOFC등의 발전용 연료전지 시스템의 효율은 약 50% 정도이며, 시스템의 발전효율을 높이기 위한 여러 연구가 진행되고 있다. 그 중에서 고온의 배열을 이용하여 연료전지 발전시스템의 효율을 향상시키기 위해 FuelCell Energy, Ansaldo Fuel Cells 및 Simens Westinghouse 등에서 수백 kW급의 fuel cell - gas turbine hybrid system에 대한 상용화 수준의 실증연구가 진행되었다. 본 연구에서는 발전용 연료전지 시스템의 발전효율을 높이기 위한 방안 중 하나로 배열을 이용하여 steam을 발생시켜 air amplifier에 사용함으로써 연료전지 시스템의 MBOP(Mechanical Balance of Plant)중 전력을 소비하는 air blower를 대체하여, 시스템 효율을 향상시키고 시스템의 가용성을 높일 수 있는 설계안에 대하여 논하고자 한다.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.359-365
• /
• 2016

With the government's support using new and renewable energy, photovoltaic equipment has been rapidly supplied. However, compared to supply rate, maintenance has not supported enough and relevant research has not much conducted. Even though large power plant facilities have been maintained well, small equipment for detached houses has been rarely maintained. Therefore, the purpose of this study is to analyze maintenance effectiveness of photovoltaic equipment for detached houses. It was analyzed that photovoltaic equipments were merely maintained. What is the most important in maintenance effectiveness is increase of power generation. It was estimated that if photovoltaic equipment for detached houses is maintained well, power generation increases by 6.5% at least. That produces the same effect as the additional supply of photovoltaic equipment to 9,700 households. As a result, it is necessary to maximize the effectiveness of the government's budget investment through well maintenance of photovoltaic equipments.

• Ceramist
• /
• v.21 no.4
• /
• pp.312-330
• /
• 2018

Energy storage/conversion has become crucial not only to meet the present energy demand but also more importantly to sustain the modern society. Particularly, electrical energy storage is critical not only to support electronic, vehicular and load-levelling applications but also to efficiently commercialize renewable energy resources such as solar and wind. While Li-ion batteries are being intensely researched for electric vehicle applications, there is a pressing need to seek for new battery chemistries aimed at stationary storage systems. In this aspect, Zn-ion batteries offer a viable option to be utilized for high energy and power density applications since every intercalated Zn-ion yields a concurrent charge transfer of two electrons and thereby high theoretical capacities can be realized. Furthermore, the simplicity of fabrication under open-air conditions combined with the abundant and less toxic zinc element makes aqueous Zn-ion batteries one of the most economical, safe and green energy storage technologies with prospective use for stationary grid storage applications. Also, Zn-ion batteries are very safe for next-generation technologies based on flexible, roll-up, wearable implantable devices the portable electronics market. Following this advantages, a wide range of approaches and materials, namely, cathodes, anodes and electrolytes have been investigated for Zn-ion batteries applications to date. Herein, we review the progresses and major advancements related to aqueous. Zn-ion batteries, facilitating energy storage/conversion via $Zn^{2+}$ (de)intercalation mechanism.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.260-263
• /
• 2005

The effects of internal manifold designs the reactant feed-stream in Polymer Electrolyte Fuel Cells (PEFCs) is studied to figure out mass flow-distribution patterns over an entire fuel cell stack domain. Reactants flows are modeled either laminar or turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-determined for computational analysis. In this work, numerical models for reactant feed-stream in the PEFC manifolds are classified into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain information on the optimal design and operation of a PEMC system.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.125-148
• /
• 2014

This paper performs a historical analysis on the various factors contributing to the current carbon lock-in of Korean electricity industry by using techo-institutional complex. The possibilities of the industry's carbon lock-out toward more sustainable development are also investigated. It turns out that market, firm, consumer, and government factors are all responsible for the development of the carbon lock-in of Korean power industry; the Korean government consistently favoring large power plants based on the economy of scale; below-cost electricity tariff; inflation policy to suppress increases in power price; rapid demand growth in summer and winter seasons; rigidities of electricity tariff; and expansion of gas-fired and imported coal-fired large power plants. On the other hand, except for nuclear power generation and smart grid, environment laws and new and renewable energy laws are the other remaining factors contributing to the carbon lock-out. Considering three key points that Korea is an export-oriented economy, the generation mix is the most critical factor to decide the amounts of carbon emission in the power industry, and the share of industry and commercial power consumption is over 85%, it is unlikely that Korea will achieve the carbon lock-out of power industry in the near future. Therefore, there are needs for more integrated approaches from market, firm, consumer, and government all together in order to achieve the carbon lock-out in the electricity industry. Firstly, from the market perspective, it is necessary to persue more active new and renewable energy penetration and to guarantee consumer choices by mitigating the incumbent's monopoly power as in the OECD countries. Secondly, from the firm perspective, the promotion of distributed energy system is urgent, which includes new and renewable resources and demand resources. Thirdly, from the consumer perspective, more green choices in the power tariff and customer awareness on the carbon lock-out are needed. Lastly, the government shall urgently improve power planning frameworks to include the various externalities that were not properly reflected in the past such as environmental and social conflict costs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.28-35
• /
• 2012

Recently, as the social interest increase has been focused on new renewable energy system to build-up sustainable urban planning system, the related studies have been actively conducting. As well as in other areas, the construction area, which accounts for over 40% of the total energy consumption, clearly showed this tendency. Whereas, various landscape facilities applying renewable energy equipments have been manufactured and installed, systematic study available for planning and designing is rarely found in Korea. This study is expected to contribute to the landscape planning and designing by quantifying the energy-efficient and economic advantages of the renewable energy system for landscape facilities. For this purpose, the analysis on the energy-efficiency and economic values under the scenario that the current fossil power supply for the streetlights in urban parks in Seoul, Daegu, and Incheon were replaced by photovoltaic power generation were performed through RETScreen$^{(R)}$ a clean energy simulation program based on the NASA Satellite Meteorological Data. As a result, the generated power and the economic values vary depending on the climatic features of the appointed cities. This study will be used to build up the effective decision-making in applying the clean renewable system to the plan and design of landscaping.