• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2287-2289
• /
• 1999

In this paper, a new method for calculating capacitance in multi-electrode system with arbitrarily shape is presented. This new approach based on divergence theorem and Gauss's law is achieved by Surface-Contacted Element(SCE) for Gaussian surface. To evaluate capacitance in multi-electrode system, two dimensional finite element method using only the elements which is contacted one nod (PE: Point-Element) or two nod (FE: Face-Element) with surface is employed. The proposed SCE method has short computing time to calculate capacitance which is because it uses only SCE elements and needs one calculation loop while exiting FEM method in servral loops. This method is verified by application in calculating capacitance using potential detection device model which is composed with anode, cathode, and floating electrode.

• 한국멀티미디어학회논문지
• /
• 제21권8호
• /
• pp.864-875
• /
• 2018

In this paper, we propose a measurement method for height of white light scanning interferometer using deep learning. In order to measure the fine surface shape, a three-dimensional surface shape measurement technique is required. A typical example is a white light scanning interferometer. In order to calculate the surface shape from the measurement image of the white light scanning interferometer, the height of each pixel must be calculated. In this paper, we propose a neural network for height calculation and use virtual data generation method to train this neural network. The accuracy was measured by inputting 57 actual data to the neural network which had completed the learning. We propose two new functions for accuracy measurement. We have analyzed the cases where there are many errors among the accuracy calculation values, and it is confirmed that there are many errors when there is no interference fringe or outside the learned range. We confirmed that the proposed neural network works correctly in most cases. We expect better results if we improve the way we generate learning data.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.45-52
• /
• 2003

A three-dimensional aerodynamic shape optimization technique in inviscid compressible flows is developed by using a parallel continuous adjoint formulation on unstructured meshes. A new surface mesh modification method is proposed to overcome difficulties related to patch-level remeshing for unstructured meshes, and the effect of design sections on aerodynamic shape optimization is examined. Applications are made to three-dimensional wave drag minimization problems including an ONERA M6 wing and the EGLIN wing-pylon-store configuration. The results show that the present method is robust and highly efficient for the shape optimization of aerodynamic configurations, independent of the number of design variables used.

• 한국멀티미디어학회논문지
• /
• 제1권1호
• /
• pp.26-36
• /
• 1998

2차원 밝기 영상에서 3차원 정보를 얻는 문제는 컴퓨터 시각 연구에서 매우 중요한 분야를 차지하고 있다. 이러한 목적을 위해 먼저 2차원 영상을 취득할 때 카메라의 위치, 광원의 방향, 영상내 물체의 반사특성 등 본질적인 정보를 이용한다. 이중에서 물체의 표면 반사특성은 매우 중요한 단서가 된다. 과거에는 물체의 반사특성을 Lambertian 반사만을 전제하여 연구를 진행했지만 실세계의 물체는 대부분 Non-Lambertian 반사특성을 갖는다. 본 논문에서는 2차원 밝기 영상에서 물체의 반사특성을 해석하고, 반사특성 파라미터를 추정하여 물체의 형상을 복구하는 새로운 방법과 반사특성을 모르는 상황에서 신경회로망 학습에 의해 형상을 복구하는 방법을 제안한다. 물체의 반사특성은 전반사 성분과 난반사 성분을 함께 갖는 Non-Lambertian 면을 그 대상으로 하며, 이러한 반사특성은 전반사(Torrance-Sparrow) 모델과 난반사(Lambertian) 모델의 선형적인 합으로 설명될 수 있다. 본 논문에서 제안한 Photometric Matching은 주변 화소의 밝기 분포를 고려하여 참조영상과의 매칭을 통한 형상복구 알고리듬으로써 기존의 Photometric Stereo에 근본을 두고 있지만, 잡음 및 오차의 누적 정도가 향상되었다. 또한 물체의 반사특성을 모르는 상황에서 신경회로망 학습에 의한 형상복구방법을 제안한다. 이 방법은 역전파 학습알고리듬을 이용해 광원 방향에 따른 밝기값에 대해 면법선을 교사하여 형상을 결정한다.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.39-48
• /
• 2005

As the industrial development is accelerated, a new machining process and system are keenly required to achieve super precision surface finish. Especially to get ground surface finish fer complicated and narrow inner shape of molds, it is impossible with the existing methods so that a new method is being required to be developed. A new material, called Magic(MAGnetic Intelligent Compounds), is finally made and it is called Magic machining that uses this material. There is a way to make a material as follows, the mixture of magnetic particles, bonding material and particles of abrasive grain should be melt down by proper heat, and then this mixture put in a mold and cool down in magnetic field which has a uniform direction. This new polishing method is spotlighted as an excellent solution to the existing problems. However it hasn't reported any study about the influence of the machining conditions of polishing velocity, amplitude and polishing pressure to the surface roughness yet. This study would examine closely the influence of polishing conditions of the Magic polishing tool to the surface finish to decide the optimum polishing condition and to standardize the Magic polishing work.

• Animal Systematics, Evolution and Diversity
• /
• 제36권2호
• /
• pp.143-153
• /
• 2020

Six new species of two genera Dysidea and Pleraplysilla (Demospongiae: Dictyoceratida: Dysideidae) are described from Jejudo Island, Dokdo Island and Guryongpo, Korea. Among them, five new species of the genus Dysidea are compared with other reported species in fibres structure, cored detritus and fibres arrangement. Dysidea niveus n. sp. is characterized by thin collagenous plate-like fibres. Dysidea dokdoensis n. sp. is similar to D. geomunensis Kim et al., 2020 in skeletal structure, but differs in length of surface conules. Dysidea hydra n. sp. is similar to D. mureungensis Kim et al., 2020 at the surface, but differs in fibres cored with spicules. Dysidea sabulum n. sp. is similar to D. glavea Kim et al., 2020 in cored large sands in fibres, but differs in having numerous large sands cored in fibres throughout the sponge. Dysidea hirsuta n. sp. is unique, only surface fibres cored with large sands but not in choanosome. A new species of genus Pleraplysilla, P. flabellum n. sp. is compared with seven other reported species. This new species is not encrusting but has a thick flabellate shape.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.82-87
• /
• 2006

The existing raised pavement marker, however, have some limitations. Most of them are square-shaped which makes only forward and backward retro-reflection, their orientation can be easily changed by impact of vehicle, and the surface reflector can be readily contaminated leading poor functioning. In addition, maintenance for broken raised pavement marker is not easy. The purpose of the study is to design and manufacture a new and improved type of raised pavement marker. The new raised pavement marker has round-shaped upper structure. Its body was separated from the holder and the reflector was surrounded by acrylic cover. We tested performances of the constituent parts, optimum load after installation, and reflection efficiency. The new raised pavement marker will be an initiation of studies on the improvement of the shape and performance of raised pavement markers.

• 산업기술연구
• /
• 제24권A호
• /
• pp.29-35
• /
• 2004

Fine blanking can be considered as a manufacturing process capable of producing sheet metal parts with completely smooth edges that may be hardly obtained by conventional shear-cutting procedures. This fact, together with the considerable economic advantages offered by this process, has been responsible for the rapid acceptance of fine blanking throughout the manufacturing industry all over the world, and the discovery of many new applications. This study was performed to investigate the effect of clearance and V-ring shape on the quality of sheared surface in a fine blanking process. The critical value needed to apply the normalized Cockcroft-Latham fracture criterion to the simulation of fine blanking is obtained by correlating the result of finite element analysis and that of experiment for the uniaxial tensile test. From finite element analysis of an axisymmetric fine blanking process, it has been found that punch load, die-roll depth, burnish zone size and shape of sheared surface are considerably influenced by clearance and V-ring shape.

• 한국지반공학회논문집
• /
• 제20권8호
• /
• pp.193-203
• /
• 2004

표면이 거친 강성옹벽의 경우 뒷채움재에서 발생하는 아칭효과로 인해 옹벽에는 비선형의 토압분포가 작용하며, 아칭효과가 비선형의 토압분포에 미치는 영향은 옹벽의 변위 형태에 따라 달라진다. 따라서 강성옹벽에 작용하는 주동토압의 크기와 비선형의 토압분포를 정확하게 산정하기 위해서는 옹벽의 변위형태에 따라 달라지는 뒷채움재에 서 발생하는 실제적 인 파괴면 형상과 아칭효과를 고려해야만 한다. 따라서 본 연구에서는 강성옹벽이 저점을 중심으로 회전하는 경우에 뒷채움재에서의 아칭효과와 비선형의 파괴면 형상을 고려함으로써 비선형의 주동토압을 산정할 수 있는 토압산정식을 제안하였다. 이 과정에서 토압산정식이 수학적으로 복잡해지는 것을 피하기 위하여 뒷채움재에서 발생하는 비선형의 파괴면 형상은 4개의 직선으로 구성되는 가상의 파괴면으로 대체하였다. 그리고 제안식으로부터 구한 예측치를 기존의 모형시험 결과와 비교한 결과 제안식은 만족스런 토압 예측치를 제공하는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.189-195
• /
• 2000

RP techniques have their unique characteristics according to the working principles : star-stepped surface of parts due to layer-by-layer stacking low build speed caused by line-by-line solidification to fish one layer and post processing to improve surface finish etc The objective of this study is to propose a new RP technique Variable Deposition Mnanufacturing (VDM) which can make up for the disadvantages of the existing RP techniques and to develop an apparatus to implement the technique. The proposed process can greatly reduce the build time and improve the surface finish of parts generated. Experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Some simple shapes such as a line-shape an S-shape and a circle-shape are fabricated from Ethylene Vinyl Acetatecopolymer(EVA) In order to examine the applicability of VDM to more general shapes a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as a trial approach. The current basic study shows a high potential of practical use of the proposed VDM process to prototyping of a general three-dimensional shape.