• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.461-462
• /
• 2008

$BaMgAl_{10}O_{17}$:Mn, $Eu^{2+}$ green phosphors has been synthesized by the solid state reaction. Green phosphors of nano-size were manufactured in short time by shake method. which were easily manufactured respectively general method. Green phosphors of nano size were control additive, size of $ZrO_3$ ball, shake time and weight of ball in toluene. In result that green phosphors were obtained particle size of 140nm~150nm. The characteristics of fired samples were obtained by 365nm and 380nm excitation source under ultraviolet. In result that the highest PL intensity were observed in wavelength of 365nm.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.1
• /
• pp.191-206
• /
• 2013

Nowadays consumers have begun to have interest in eco-friendliness, and re-design is being highlighted as a fashion alternative for consumers with interest in ethical consumption. This study established the concept of re-design fashion as a way to practice eco-friendly design and analyzed various re-design fashions with four types. And it also analyzed decorative and structural details being often employed for re-design. This study intends to suggest new alternative fashion in order to develop re-design fashion design that can satisfy both eco-friendliness and practicality. The results of the research are as follows: First, according to the result of analyzing re-design fashion types, they can be divided into the types of developing new products through combination of decorative details, combination of structural details, development of new fabric through fabric reconstruction, and reconstruction to different products. Second, according to the result of examining the details that can be used to develop new re-design fashion products, pleats, shirring, tuck, peplum, or tab's decorative details and neck-line, collars, sleeves, cuffs, or pocket's structural details are utilized often. Third, total seven recycled clothes were used to design three works taking decorative and structural details. Through this, the study suggests re-design fashion products that can solve environmental pollution resulted from wastes of clothes.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.55-64
• /
• 2018

The purpose of this study is to examine the status and limitations of the activation plan as a result of the change in urban regeneration paradigm. In particular, the change in housing life was considered following the guidelines of the New Deal project. Specifically, the three types - General Neighborhood, Housing Support, and DongneSaligi - were analyzed from the perspective of organization, space and program. In addition, the master plan and unit project, the organization and progress, and the budget plan were reviewed. As a result, the New Deal project for urban regeneration is importance on economic regeneration, which, unlike the integrated and continuous guide proposed by the government, could limit the individual progress of transitional organizations, 2-dimensional planing and various programs. Thus, first, in order to supplement the organization's verticality and inefficiency in progress, the annual business assessment should be discouraged and the permit and progress of the project should be determined at the local government level. Second, integrated and multidimensional planning is necessary to produce synergy effects in the physical environment. Finally, the link between program unit projects and the economic effects can be considered.

• Health Policy and Management
• /
• v.3 no.1
• /
• pp.84-101
• /
• 1993

The current method of rate adjustment is based on the evaluation of the financial performance of hospitals. The method has the disadvantages such as too complicated, expensive process as well as low reliability due to small sample size. This study, therefore, develops a new model for the rate adjustment with the use of the composite index. In addition to that, it examines the validity of the model by comparing the result of the new method with that of the conventional method. The idea of the new model comes from the Medicare Economic Index(MEI) on which physician fees for the Medicare patients are adjusted periodically in the United States. Medical costs are classified into three groups : labor costs, materials and other expenses. Labor costs are subdivided into physicians and other personnels. Materials are subdivided into drugs and others. Other expenses are subdivided into 5 items. Macro economic indices are selected for each cost item in order to reflect the cost inflation during the specific period. Then the composite index which integrate all items according to the ration of each item in the total costs is calculated. The result from the application of empirical data to the new model is very similar to that of the current method. Furthermore, this method is very simple and also to easy to get social concensus. This model can be replaced the current method based on the analysis of the financial performance for the adjustment of medical fees.

• Wind and Structures
• /
• v.30 no.6
• /
• pp.633-648
• /
• 2020

The objective of this work was to investigate the interference effects of two-parallel bridge decks on aerodynamic coefficients, vortex-induced vibration, flutter instability and flutter derivatives. The two bridges have significant difference in cross-sections, dynamic properties, and flutter speeds of each isolate bridge. The aerodynamic static tests and aeroelastic tests were performed in TU-AIT boundary layer wind tunnel in Thammasat University (Thailand) with sectional models in a 1:90 scale. Three configuration cases, including the new bridge stand-alone (case 1), the upstream new bridge and downstream existing bridge (case 2), and the downstream new bridge and the upstream existing bridge (case 3), were selected in this study. The covariance-driven stochastic subspace identification technique (SSI-COV) was applied to identify aerodynamic parameters (i.e., natural frequency, structural damping and state space matrix) of the decks. The results showed that, interference effects of two bridges decks on aerodynamic coefficients result in the slightly reduction of the drag coefficient of case 2 and 3 when compared with case 1. The two parallel configurations of the bridge result in vortex-induced vibrations (VIV) and significantly lower the flutter speed compared with the new bridge alone. The huge torsional motion from upstream new bridge (case 2) generated turbulent wakes flow and resulted in vertical aerodynamic damping H1^* of existing bridge becomes zero at wind speed of 72.01 m/s. In this case, the downstream existing bridge was subjected to galloping oscillation induced by the turbulent wake of upstream new bridge. The new bridge also results in significant reduction of the flutter speed of existing bridge from the 128.29 m/s flutter speed of the isolated existing bridge to the 75.35 m/s flutter speed of downstream existing bridge.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1679-1686
• /
• 2024

Graphite material plays an important role in nuclear reactors especially the high-temperature gas-cooled reactors (HTGRs) by its outstanding comprehensive nuclear properties. The structural integrity of graphite pebble fuel elements is the first barrier to core safety under any circumstances. The correct knowledge of the stiffness coefficient of the graphite pebble fuel element inside the reactor's core is significant to ensure the valid design and inherent safety. In this research, a vertical extrusion device was set up to measure the stiffness coefficient of the graphite pebble fuel element by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University in China. The stiffness coefficient equations of graphite pebble fuel elements at different temperatures are given (in a helium atmosphere). The result first provides the data on the high-temperature stiffness coefficient of pebbles in helium gas. The result will be helpful for the engineering safety analysis of pebble-bed nuclear reactors.

• The Korean Journal of Malacology
• /
• v.30 no.2
• /
• pp.135-138
• /
• 2014

We report two new records Korean marine bivalves. The new record species are Siliqua albida (Adams & Reeve, 1850) and Macoma (Macoma) middendorffi Dall, 1884. As a result, the family Pharidae in Korea turned out to be 8 species of 4 genera and Tellinidae are 37 species of 15 genera.

• Animal cells and systems
• /
• v.14 no.1
• /
• pp.53-58
• /
• 2010

From an examination of caprellid specimens collected from Korea, we found a new species belonging to the genus Perotripus. This new species is clearly distinguished from two previously recorded species, P. brevis and P. keablei, in having an acute projection and blunt apex of distal segment of pereopod 5. This genus Perotripus is reported from Korea for the first time. We described it with figures in detail. As a result, Korean caprellid fauna consists of 35 species in seven genera.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1109-1114
• /
• 2001

This paper describes an attempt to develop a new truss model for reinforced concrete beams failing in shear based on a rational behavioral model. The key idea incorporated with truss model is the internal force state factor which is able to express global state of internal force flow in cracked reinforced concrete beams subjected to shear and bending. A new truss model using internal force state factor may provide a comprehensive result of shear strength in reinforced concrete beams without web reinforcement.

• Journal of the Korean Mathematical Society
• /
• v.48 no.2
• /
• pp.421-430
• /
• 2011

By evaluating the containment measure of one domain to contain another, we will derive some new Bonnesen-type inequalities (Theorem 2) via the method of integral geometry. We obtain Ren's sufficient condition for one domain to contain another domain (Theorem 4). We also obtain some new geometric inequalities. Finally we give a simplified proof of the Bottema's result.