• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.182-185
• /
• 2014

In this paper, the ADC performs research and development for high speed data transfers to minimize the optical delay. Have more $6{\mu}s$ delay in the data signal converting optical repeater transmission system existing there has been a limit on the high-speed data transmission, and signal conversion. The need to develop a new technique to reduce the delay in time within $2{\mu}s$ data signal converted by using this direct conversion system. It is desired the development of the core technologies necessary for the signal transduction component, such as mobile communications LTE, LTE advanced service transport network is established, the delay time $3{\mu}s$ technology for reducing the delay time in the signal converting a revolutionary step is applied in this paper we have developed an ADC.

• Journal of Information Technology Services
• /
• v.19 no.6
• /
• pp.145-159
• /
• 2020

Because of the recent development of information and communication technology, companies are exposed to various media such as blogs, social media, and YouTube. In particular, exposed news affects the company's reputation. So, while positive news can improve corporate value, negative news can lead to financial losses for the company. In this study, we redefine corporate reputation as social responsibility, vision and leadership, financial performance, products and services through existing literature, and conducted an AHP survey with a total of four components to calculate the weight of each factor. As a result of the calculation, the proportion of financial performance was the highest at 0.41, and products and services, vision and leadership, and social responsibility were the lowest. In addition, in order to measure the reputation of a company, it is classified as a component that defines online news using the LDA technique. In addition, through sentiment analysis, an index for each corporate reputation factor was derived, and the reputation index was calculated by combining it with the AHP analysis result, and Spearman ranking correlation analysis was performed to secure the validity of the research results. Therefore, the significance of this study is that the definition and importance of the constituent factors can contribute to the future planning and development direction of the company, and also contribute to the derivation of the corporate reputation index. This study is significant in that a new analysis methodology that applied AHP analysis results to sentiment analysis was suggested.

• Korean Medical Education Review
• /
• v.26 no.2
• /
• pp.93-107
• /
• 2024

Interprofessional education (IPE) is relatively new in medical schools in South Korea. Since the introduction of IPE in 2022, its effective and sustainable implementation has been of great interest in medical schools. This study analyzed literature on the development of IPE in the United States, Canada, the United Kingdom, Australia, and Japan to explore strategies for successful IPE in Korean medical schools. A systematic literature search focused on institutionalizing IPE yielded 30 papers for review. The findings included the following crucial elements for effective IPE: (1) government or institutional-led support; (2) establishment of networks and partnerships; (3) development of standardized core competency frameworks for IPE; and (4) inclusion of IPE in accreditation standards. These aspects underscore the importance of IPE as an essential component of health professional education that should be effectively and sustainably implemented in academic settings. The study concludes that the successful integration and sustainable development of IPE in Korean health education will necessitate expanded and proactive governmental support. Moreover, promoting collaborations among universities, hospitals, and local healthcare institutions will be vital for creating synergies in implementing IPE programs. Establishing networks to develop and execute joint IPE initiatives and securing initial support for conceptualizing and developing competency frameworks will be critical. Additionally, forming consortia of healthcare accreditation bodies to collaboratively develop and incorporate IPE standards into evaluation criteria will be essential. Efforts to surmount these challenges will contribute to building a structural and institutional support system for the successful introduction and sustainability of IPE in Korea.

• Corrosion Science and Technology
• /
• v.4 no.3
• /
• pp.89-94
• /
• 2005

This paper presents the results of a study that was undertaken to optimize the ratio of the components of a new multi-component inhibitor blend composed of orthophosphate/ phosphonates/ acrylate copolymer/ isothiazolone. The effects of newly developed inhibitor on carbon steel dissolution in synthetic cooling water were studied through weight loss tests, electrochemical tests, scale tests, and micro-organism tests. The obtained results were compared to blank (uninhibited specimen) and showed that developed inhibitor revealed very good corrosion, scale, and micro-organism inhibition simultaneously. All measurements indicated that the efficiency of the blended mixture exceeded 90 %. The inhibitive effects arose from formation of protective films which might contain calcium phosphate, calcium phosphonate, and iron oxide. The nature of protective films formed on the carbon steel was studied by scanning electron microscopy (SEM) and auger electron spe ctroscopy (AES). Inhibitor used in this study appeared to have better performance for scale inhibition due to their superior crystal modification effect and excellent calcium carbonate scale inhibition properties. The effect of inhibitor on microorganisms was evaluated through minimum inhibitory concentration (MIC) test. All kinds of micro-organisms used in this study were inhibited under 78ppm concentration of inhibitor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2330-2336
• /
• 2013

Since many man-made systems consist of autonomous and interactive components, it is intrinsically difficult to analyze their abnormal behavior. The logical analysis of such a system is an indispensable process for high quality and reliable system development. In this paper, we propose an analysis method using two algebraic operations, named composition and minimization. Repetitive composition and minimization of component models with respect to a set of important events produces a new analysis model that has the same input output responses to an environment. An analysis example of the alternating bit protocol demonstrates the effectiveness of the proposed method showing that each message generated at the sender side eventually arrives to a receiver.

• The Journal of Society for e-Business Studies
• /
• v.6 no.3
• /
• pp.63-80
• /
• 2001

The construction of the students knowledge in e-Learning systems, namely the student modeling, is a core component used to develop e-Learning systems. However, existing e-Learning systems have many problems to share the knowledge in a heterogeneous student model and a distributed knowledge base. Because the methods of the knowledge representation are different in each e-Learning systems, the accumulated knowledge cannot be used or shared without a great deal of difficulty. In order to share this knowledge, existing systems must reconstruct the knowledge bases. Consequently, we propose a new a Case Markup Language based on XML in order to overcome these problems. A distributed e-Learning systems fan have the advantage of easily sharing and managing the heterogeneous knowledge base proposed by CaseML. Moreover students can generate and share a case knowledge to use the communication protocol of agents. In this paper, we have designed and developed a CaseML by using a knowledge markup language. Furthermore, in order to construct an intelligent e-Learning systems, we have done our research based on the design and development of the intelligent agent system by using CaseML.

• Journal of electromagnetic engineering and science
• /
• v.17 no.3
• /
• pp.138-146
• /
• 2017

A phase-locked dielectric resonator oscillator (PLDRO) is an essential component of millimeter-wave communication, in which phase noise is critical for satisfactory performance. The general structure of a PLDRO typically includes a dual loop of digital phase-locked loop (PLL) and analog PLL. A dual-loop PLDRO structure is generally used. The digital PLL generates an internal voltage controlled crystal oscillator (VCXO) frequency locked to an external reference frequency, and the analog PLL loop generates a DRO frequency locked to an internal VCXO frequency. A dual loop is used to ease the phase-locked frequency by using an internal VCXO. However, some of the output frequencies in each PLL structure worsen the phase noise because of the N divider ratio increase in the digital phase-locked loop integrated circuit. This study examines the design aspects of an interconnected PLL structure. In the proposed structure, the voltage tuning; which uses a varactor diode for the phase tracking of VCXO to match with the external reference) port of the VCXO in the digital PLL is controlled by one output port of the frequency divider in the analog PLL. We compare the proposed scheme with a typical PLDRO in terms of phase noise to show that the proposed structure has no performance degradation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.5
• /
• pp.609-616
• /
• 2018

The cargo handling system, which is composed of a fuel gas supply unit and cargo tank pressure control unit, is the second largest power consumer in a Liquefied Natural Gas (LNG) carrier. Because of recent enhancements in ship efficiency, the surplus boil-off gas that remains after supplying fuel gas for ship propulsion must be reliquefied or burned to regulate the cargo tank pressure. A full or partial liquefaction process can be applied to return the surplus gas to the cargo tank. The purpose of this study is to review the current partial liquefaction process for LNG carriers and develop new processes for reducing power consumption using exergy analysis. The developed partial liquefaction process was also compared with the full liquefaction process applicable to a LNG carrier with a varying boil-off gas composition and varying liquefaction amounts. An exergy analysis showed that the Joule-Thomson valve is the key component needed for improvements to the system, and that the proposed system showed an 8% enhancement relative to the current prevailing system. A comparison of the study results with a partial/full liquefaction process showed that power consumption is strongly affected by the returned liquefied amount.

• The Magazine of the IEIE
• /
• v.35 no.7
• /
• pp.57-71
• /
• 2008

The last decade has witnessed great improvements in power semiconductor devices thanks to the advanced design and process, which have made it possible to significantly improve the electrical performances of electronic systems while simultaneously reducing their site, weight and perhaps most importantly reducing their cost. Among the power semiconductor devices, IGBT will be a key semiconductor component for power industry since it has a huge potential to cover large areas of power electronics from small home appliances to heavy industries. Currently, only a few limited power semiconductor manufacturers supply most of the industrial consumptions of power IGBT and its modules. Therefore, a large portion of technology in the power industry is dependent on other advanced countries. In this regard, to independently build power IGBT devices and the relevant power module technology, Korean government initiated a new 5-year project 'Power IT,' which also aimed at booming the business of the power semiconductor and the allied industries. With the success of this power IT project, it is expected that the power semiconductor technology will be a basis to foster the high power semiconductor industry and moreover, there will be more innovative developments in the Korea region and globally Also, forming the channel between the customers and suppliers, it is possible to effectively develop the customized power products, which could strengthen the competitiveness of Korean power industry. Furthermore, the power industry including semiconductor manufacturers will be technologically self-supporting and be able to obtain good business opportunities, and eventually increase the share in the growing power semiconductor market, which could be positioned as a major industry in Korea.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.133-137
• /
• 2003

The shock absorber for vehicles is the important component to absorb the shock in driving. These essential components, piton and piston rod, must be made of S25C, S45C and SCM440 generally depending on kind of vehicles, precisely machined and assembled by the bolt. And it has been difficult to weld this sort of dissimilar materials. They could be unstable in the quality by the conventional arc welding. And also they have a lot of technical problems in manufacturing. But by the friction welding technique, it will be able to be made without such problems. These factors above necessitate nowadays the domestic development of the shock absorber by friction welding and a new approach of study on real-time quality evaluation by AE techniques.