• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.61-67
• /
• 2021

In this study, the adequacy of water supply critical factors of urban design was examined. The supply of water supply is analyzed in various ways as the design progresses. Starting with basic data collection and analysis a supply and demand plan is established to calculate the amount of water supply and in this study the adequacy of population estimation and original unit calculation was evaluated. Among the second new cities where actual data can be secured Wirye New Town was selected as the study target area. Related data were analyzed to confirm the future population and the original unit and compared with the measured data. As of September 2020, the population of Wirye New Town was 93,977, showing the appropriateness of about 84% with a planned population of 110,990 confirming that the planned population and the actual population were almost similar. In the case of the original unit, it was calculated as 314 liters per person in Seoul and 320 liters per person in Seongnam at the time of design. As a result, it was found that there was some agreement in the population estimation while examining the supply in the planned city. In the case of Korea, there is a lot of interest in revitalizing the existing city, away from continuous development. Therefore it is judged that there is a need for further research on the adequacy of supply for the old city center.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.45-50
• /
• 2004

In this study, we processed two procedures of application test of filler for special-purpose utility that are new application methods of aerated concrete and properties test of aerated concrete according to mixing ratio because we investigated the better use of aerated concrete as filler for fireproof safety and we proposed basic data about standardization of mixing of aerated concrete. We measured flow and volume change of aerated concrete. And if its volume doesn't change, we added measuring unit weight and compressive strength. To test application of aerated concrete as filler for fireproof safety, we filled up aerated concrete to fireproof safety according to suitable mixing ratio. Then we measured maximum temperature of inner part of fireproof safety in accordance with the standard test of fireproof. According to the results, aerated concrete as filler for fireproof safety could be possibly used. So when we make aerated concrete, we should consider using an adding agent as well as a foaming agent.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.3
• /
• pp.826-828
• /
• 2003

The effects of crude extract and bioactive fractions from Brachyglottis monroi on biological activity were investigated. The crude ethanol extract inhibited the growth of the Gram positive bacterium Bacillus subtilis (ATCC Strain number 19659, 1 mm zone at 150 μg/disk) and the dermatophyte Trichophyton mentagrophytes (ATCC 28185, 2 mm zone at 150 μg/disk), and toxic to P388 tumor cells (IC50 23.96 μg/ml at 75 μg/disk). Cytotoxic activity was strongly showed by Fr. 6 (P388 IC50 19.67 μg/ml at 75 μg/disk).

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.1
• /
• pp.250-253
• /
• 2004

The effects of crude extracts from medicinal plants on biological activity were investigated. The crude ethanol extract of H. paucistipula inhibited the growth of the Gram positive bacterium Bacillus subtilis ATCC 19659, (2 mm inhibition zone at 150 ㎍/disc) and the dermatophyte Trichophyton mentagrophytes ATCC 28185, (7 mm inhibition zone at 150 ㎍/disc), and toxic to P388 murine leukaemia cells ATCC CCL 46 P388D1, (IC/sub 50/ 2.48 ㎍/㎖ at 75 ㎍/disc). This crude ethanol extract of H. paucistipula is the strongest antimicrobial and cytotoxic activities against P388 murine leukaemia cells ATCC CCL 46 P388D1.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.1-10
• /
• 2015

In this paper, we propose a new multiplication algorithm for primitive polynomial with all 1 of coefficient in case that m is odd and even on finite fields $GF(3^m)$, and design the multiplier with parallel input-output module structure using the presented multiplication algorithm. The proposed multiplier is designed $(m+1)^2$ same basic cells. Since the basic cells have no a latch circuit, the multiplicative circuit is very simple and is short the delay time $T_A+T_X$ per cell unit. The proposed multiplier is easy to extend the circuit with large m having regularity and modularity by cell array, and is suitable to the implementation of VLSI circuit.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.204-212
• /
• 2016

The soils used as trackbed in Korea are selected using USCS utilizing basic soil properties such as Grain Size Distribution(GSD), % passing of #200 sieve ($P_{200}$), % passing of #4 sieve ($P_4$), Coefficient of uniformity ($C_u$), and Coefficient of curvature ($C_c$). Degree of compaction of the soils adapted in the code by KR should be evaluated by maximum dry density (${\gamma}_{d-max}$) and deformation modulus $E_{v2}$. The most important influencing factor that is critical to stability and deformation of the compacted soils used as trackbed is stiffness. Thus, it is necessary to construct a correlation between the modulus and the basic soil properties of trackbed soil in order to redefine a new soil classification system adaptable only to railway construction. To construct the relationship, basic soil test data is collected as a database, including GSD, maximum dry unit weight (${\gamma}_{d-max}$), OMC, $P_{200}$, $P_4$, $C_u$, $C_c$, etc.; deformation modulus $E_{v2}$ and $E_{vd}$ are obtained independently by performing a Repeated Plated Bearing Test (RPBT) and Light Weight Deflectometer Test (LWDT) for ten different railway construction sites. A linear regression analysis is performed using SPSS to obtain the relationship between the basic soil properties and the deformation modulus $E_{v2}$ and $E_v$. Based on the constructed relationship and the various obtained mechanical test data, a new soil classification system will be proposed later as a guideline for the design and construction of trackbed foundation in Korea.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.1-10
• /
• 2009

As a demand for the portable device requiring smaller size and better performance is in hike, reducing the size of conventionally used planar 2 dimensional chip cannot be a solution for the enhancement of the semiconductor chip technology due to an increase in RC delay among interconnects. To address this problem, a new technology - "3 dimensional (3D) IC chip stack" - has been emerging. For the integration of the technology, several new key unit processes (e.g., silicon through via, wafer thinning and wafer alignment and bonding) should be developed and much effort is being made to achieve the goal. As a result of such efforts, 4 and 8 chip-stacked DRAM and NAND structures and a system stacking CPU and memory chips vertically were successfully developed. In this article, basic theory, configurations and key unit processes for the 3D IC chip integration, and a current tendency of the technology are explained. Future opportunities and directions are also discussed.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.380-386
• /
• 2008

The development of a new railway vehicle is under progress through the Next Generation High-Speed Rail Development Project in Korea. Its aim is to develope fundamental technology of the vehicle that can run over 400km/h. The new distributed traction bogie system, 'HEMU'(High-speed Electric Multiple Unit), will be used and is different from that of previously developed high speed railway vehicles. Previous vehicles adopted push-pull type system, which means one traction-car drives rest all of the vehicle. Due to the difference, investigation on dynamic behavior and its safety evaluation are necessary, as a part of verification of the design specification. In the paper, current progresses of researches are presented. And the High-Speed Railway vehicle system is evaluated for a dynamic characteristic simulation. Proper dynamic models including air-suspension system, wheel-rail, bogie and car-body is developed according to the vehicle simulation scenario. The basic platform for the development of dynamic solver is prepared using nodal, modal coordinate system and wheel-rail contact module. Operating scenario is prepared using commercial dynamic analysis program and used for development of dynamic model, which contains many parts such as carbodies, bogies and suspension systems. Furthermore, international safety standard is applied for final verification of the system. Finally, the reliability of the dynamic model will be verified with test results in the further researches. This research will propose a better solution when test results shows a problem in the parts and elements. Finally, the vehicle that has excellent performance will be developed, promoting academic achievement and technical development.

• Journal of Integrative Natural Science
• /
• v.16 no.1
• /
• pp.1-12
• /
• 2023

Leucosia anatum, also known as the pebble crab, is a species of crab that belongs to the family Leucosiidae. Crabs are the most conspicuous and abundant components of the epibenthic macrofauna of the mangrove ecosystems. The present investigation was carried out with the objective of enlightening the reproductive system of L.anatum through histological and histochemical studies. Histological analysis of the epithelial cells of vas deferens, the luminal size and shape of the vas deferens was carried out, since the spermatophore material is secreted and molded by the vas deferens. Histochemical analysis of the blood plasma, testis, proximal vas deferens, middle vas deferens, distal vas deferens, seminal plasma and spermatophore was done to reveal the possible transformation of their secretory materials into the spermatophoric components. Biochemical components present in the blood plasma, testis, proximal vas deferens (PVD), median vas deferens (MVD) and distal vas deferens (DVD) regions seminal plasma and spermatophore of pebble crab were analyzed to find out the quantity of free sugars, proteins, and fats. Thus the current study focuses on the histological and histochemical analysis of Testis and Vas Deferens and their secretions in L.anatum.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.2
• /
• pp.73-82
• /
• 2017

Purpose: Since the facility guidelines for National Designated Isolation Unit wards(NDIUs) had been edited since 2016, all hospital who want to expand or install NDIU should adapt the new guidelines. Instead of providing area requirement, by the way, only essential or optional facility requirements are suggested except patient bedroom in the guidelines. So, as analyze area and area composition of the NDIUs, it could be expected that this study has a role as an area planing reference for not only NDIU but also another airborne infection isolation room. Methods: For the area analysis, 18 sample hospitals are selected among 2016 year applicants. All rooms in NDIUs are grouped as zones whether those are negative air pressurized or not and programed room or not. At the end, area of the zones are summarized and analysed a relationship between area increase and bed number by both correlation analysis and regression analysis. In addition, department usable and gross area per bed, N/G ratio, G/N ratio, and average area ratio of each zone is calculated. Results: First of all, rooms in none negative air pressurized zone of the NDIUs haven't shown a regular installation so that only those in negative air pressurized zone are targeted for the area analysis. Second of all, patient room unit(0.92) and support area(0.79), by correlation analysis, are correlated with total net area. Patient room unit(0.94) and total net area(0.79) are also shown a correlation with bed number. Department usable area($R^2=0.63$, y=36.278x + 102) and patient room unit area($R^2=0.89$, y= 27.993x - 0.8924) has a relationship with bed number by regression analysis. Average N/G is shown as 0.85 and G/N 1.36. Average area ratio of circulation, doffing area, patient room unit, and support area are 25.4%, 9.1%, 50.9%, and 14.6% in order. Implications: This study is a basic research for exploring the NDIUs guidelines to find resonable evidence to develop it for its practical use. Still, it is possibly expected that the guideline is to be developed by post occupancy evaluation in the area of where minimum requirement or facility grade needs to be defined, and by further studies with various perspectives.