• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.51-58
• /
• 2005

A comparison of the analytical data obtained by three $k_0$-NAA software programs was carried out using both the airborne particulate matter collected from an urban site and the certified reference materials of the air filter and urban dust to evaluate the performance of the analysis. The individual $k_0$-NAA standardization methods of three countries, Korea, China and Vietnam which had been modified from the well established $k_0$-program were used for the comparative analysis. The measured concentrations of 30 elements from the two kinds of air samples based on this software were in agreement with each other within about 20% analytical error except for a few elements. By contrast, the results of China and Vietnam were moderately higher than that of Korea due to a systematic error associated with the detection efficiency, gamma peak analysis and geometric effect.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3202-3205
• /
• 2023

The k₀-standardization neutron activation analysis method has successfully determined the mass fraction of elements of interest using around a hundred analytical radionuclides. However, several very short-lived nuclides with half-life less than 100 s have not been used at Dalat research reactor. One of the reasons is that the values of k₀-factors of these nuclides are significantly different. Therefore, this work focused on re-determination and evaluation of k₀-factors of very short-lived nuclides ¹¹⁰Ag (T_1/2 = 24 s) and ^46mSc (T_1/2 = 18.75 s). The results of determination of the short-lived nuclides revealed that k₀-factor of ¹¹⁰Ag is significantly difference between the existing data and the obtained results in this work. The evaluation of the k₀-factors was done by using the obtained results for application of k₀-NAA for NIST-1566b and NIST-2711A standard reference materials.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.765-772
• /
• 2016

In analyzing residual radiation, researchers generally use a two-step Monte Carlo (MC) simulation. The first step (MC1) simulates neutron transport, and the second step (MC2) transports the decay photons emitted from the activated materials. In this process, the stochastic uncertainty estimated by the MC2 appears only as a final result, but it is underestimated because the stochastic error generated in MC1 cannot be directly included in MC2. Hence, estimating the true stochastic uncertainty requires quantifying the propagation degree of the stochastic error in MC1. The brute force technique is a straightforward method to estimate the true uncertainty. However, it is a costly method to obtain reliable results. Another method, called the adjoint-based method, can reduce the computational time needed to evaluate the true uncertainty; however, there are limitations. To address those limitations, we propose a new strategy to estimate uncertainty propagation without any additional calculations in two-step MC simulations. To verify the proposed method, we applied it to activation benchmark problems and compared the results with those of previous methods. The results show that the proposed method increases the applicability and user-friendliness preserving accuracy in quantifying uncertainty propagation. We expect that the proposed strategy will contribute to efficient and accurate two-step MC calculations.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.343-356
• /
• 2016

The Korea Radioactive Waste Agency (KORAD) has developed a dual-purpose metal cask for the dry storage of spent nuclear fuel that has been generated by domestic light-water reactors. The metal cask was designed in compliance with international and domestic technology standards, and safety was the most important consideration in developing the design. It was designed to maintain its integrity for 50 years in terms of major safety factors. The metal cask ensures the minimization of waste generated by maintenance activities during the storage period as well as the safe management of the waste. An activation evaluation of the main body, which includes internal and external components of metal casks whose design lifetime has expired, provides quantitative data on their radioactive inventory. The radioactive inventory of the main body and the components of the metal cask were calculated by applying the MCNP5 ORIGEN-2 evaluation system and by considering each component's chemical composition, neutron flux distribution, and reaction rate, as well as the duration of neutron irradiation during the storage period. The evaluation results revealed that 10 years after the end of the cask's design life, $^{60}Co$ had greater radioactivity than other nuclides among the metal materials. In the case of the neutron shield, nuclides that emit high-energy gamma rays such as $^{28}Al$ and $^{24}Na$ had greater radioactivity immediately after the design lifetime. However, their radioactivity level became negligible after six months due to their short half-life. The surface exposure dose rates of the canister and the main body of the metal cask from which the spent nuclear fuel had been removed with expiration of the design lifetime were determined to be at very low levels, and the radiation exposure doses to which radiation workers were subjected during the decommissioning process appeared to be at insignificant levels. The evaluations of this study strongly suggest that the nuclide inventory of a spent nuclear fuel metal cask can be utilized as basic data when decommissioning of a metal cask is planned, for example, for the development of a decommissioning plan, the determination of a decommissioning method, the estimation of radiation exposure to workers engaged in decommissioning operations, the management/reuse of radioactive wastes, etc.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.563-575
• /
• 2020

The purpose of this study is to evaluate the activation characteristics that occur in a linear accelerator for container security inspection. In the computer simulation design, first, the targets consisted of a tungsten (Z=74) single material target and a tungsten (Z=74) and copper (Z=29) composite target. Second, the fan beam collimator was composed of a single material of lead (Z=82) and a composite material of tungsten (Z-74) and lead (Z=82) depending on the material. Final, the concrete in the room where the linear accelerator was located contained magnetite type and impurities. In the research method, first, the optical neutron flux was calculated using the MCNP6 code as a F4 Tally for the linear accelerator and structure. Second, the photoneutron flux calculated from the MCNP6 code was applied to FISPACT-II to evaluate the activation product. Final, the decommissioning evaluation was conducted through the specific activity of the activation product. As a result, first, it was the most common in photoneutron targets, followed by a collimator and a concrete 10 cm deep. Second, activation products were produced as by-products of W-181 in tungsten targets and collimator, and Co-60, Ni-63, Cs-134, Eu-152, Eu-154 nuclides in impurity-containing concrete. Final, it was found that the tungsten target satisfies the permissible concentration for self-disposal after 90 days upon decommissioning. These results could be confirmed that the photoneutron yield and degree of activation at 9 MeV energy were insignificant. However, it is thought that W-181 generated from the tungsten target and collimator of the linear accelerator may affect the exposure when disassembled for repair. Therefore, this study presents basic data on the management of activated parts of a linear accelerator for container security inspection. In addition, When decommissioning the linear accelerator for container security inspection, it is expected that it can be used to prove the standard that permissible concentration of self-disposal.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.23-26
• /
• 2005

Se is well known as an anti-oxidant trace element and many customers are interested in an analysis and contents of Se in the various foodstuff samples. This study was aimed at establishig and comparing an analytical method for the determination of the Se in biological samples by neutron activation analysis using two nuclides, $^{75}Se$ and $^{77m}Se$. Keeping this objective, three NIST biological standard reference materials were chosen and the concentrations of the Se were determined under the prefixed analytical conditions such as the irradiation, decay and measurement time. The measured values by both analytical methods were evaluated with certified values. In addition, the detection limits and measurement uncertainty for the analytical results using $^{75}Se$ and $^{77m}Se$ were compared with each other.

• Journal of Nutrition and Health
• /
• v.36 no.5
• /
• pp.491-499
• /
• 2003

Selenium is a strong antioxidant trace mineral, scavenging free radicals. The prevalence of chronic degenerative diseases is increasing in Korean adults with increasing age. The increased cell damage from free radicals has been implicated in the etiology of these diseases, and evidence is accumulating that the low selenium status that comes with advanced aged is involved in the prevalence of age-associated diseases. However, little is known about the selenium status of Koreans, its age-related change and its relationship to dietary nutrient intake. In this study, the serum selenium levels of healthy adult females according to life cycle and its association with blood albumin levels and nutrient intake were examined. Serum selenium level was measured with the Huwo research reactor using the neutron activation analysis method (NAA). The overall proportion of women with selenium deficiency, serum selenium concentrations below 7.0 $\mu\textrm{g}$/dl, was 9.4%. The average serum selenium levels were 12.39 $\mu\textrm{g}$/dl, 9.45 $\mu\textrm{g}$/dl and 9.16 $\mu\textrm{g}$/dl in the young adult, middle-aged and elderly groups, respectively, showing a reduction of selenium status with advancing age. Selenium deficiency was seen only in the elderly group. Generally, serum selenium levels positively or negatively correlated with nutrient intake, but these association patterns differed depending on the age. The nutrients that showed positive correlations with selenium levels were proteins and phosphate in the young adult group (p < 0.05, p < 0.05), and total calcium, potassium and vegetable-origin calcium in the middle-aged group. Vitamin C and fiber were the negative correlated nutrients with serum selenium levels in the elderly group (p < 0.05, p < 0.05). Multiple stepwise regression analysis of the determining factors responsible for selenium status showed that age and serum albumin levels were important factors which explained up to 26.9% variances in serum selenium levels. The average selenium concentrations of Korean adult female subjects were above the deficiency levels in all three age groups. There was a tendency toward decreasing selenium levels as the age of the subjects increased. The factors with the strongest in-fluence on selenium status in healthy adult Korean females were age and serum protein status. (Korean J Nutrition 36(5): 491~499, 2003)

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.55-65
• /
• 2004

We have used the Naju Oryang-dong Kiln, the Jar coffin producing center from the 5th to early 6th century A.D. found for the first time in Korea in 2002 and conducted trace element analysis of Jar coffin objects excavated in Jar coffin the old tomb area formed mainly around Yeongsan valley, the consuming area of the same period as our main research objects. For this analysis, we have used both the NAA method, the non-parametric micro-minerals analysis. In order to compare and verify these remains, we have used the results from the analysis on the Jar coffin remains in the Mandong remains, Jeonbuk district. We have quantitatively analyzed 17 types of elements from the Jar coffin remains sample to allow for various and correct analysis. With their results, we could find out that the jar coffins made in Oryang-dong kiln teo are statistically identical to those in Daean-ri Old tomb/Shinchon-ri 9th old tomb, Okya-ri old tomb, and Banam-Old tomb. Also, we can conclude that there is a high possibility that ongwans produced from Oryang-dong kiln being used in Daean-ri Old tomb/Shinchon-ri 9th old tomb, Okya-ri old tomb, and Banam-Old tomb was distributed through some form of trade. On the other hand, we could obtain other analysis results that jar coffins excavated and investigated in the Mandong remains and Ithe npyong Old tomb were likely from other Jar coffin kilns through trade and distribution.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.766-774
• /
• 2000

The major and trace constituents of Mongolian chromite were analyzed by ICP-AES. The dissolution procedures, mixed acid ($HClO_4+H_3PO_4$) digestion and fusion with $Na_2O_2$ flux, have been studied to dissolve the chromite. The optimum dissolution method was found to be a fusion with $Na_2O_2$ flux. The effect of large amount of Na on major and trace constituents was examined when these elements were determined by ICP-AES. There was no effect on major elements at a concentration of Na 250 mg/L solution. The emission intensity of trace constituents containing Na 1,250 mg/L decreased to 1.0-5.2% according to elements and wavelengths. The result of this method was compared with that of neutron activation analysis (NAA) to confirm the accuracy of this procedure. The results between two methods were in a good agreement within less than 5% for $Al_2O_3$, $Cr_2O_3$, MgO and -20 to 8% for Co, Mn, V, Zn, respectively.

• Journal of Nutrition and Health
• /
• v.39 no.3
• /
• pp.252-263
• /
• 2006

Zinc is an antioxidant trace mineral, scavenging free radicals and known to be involved in inflammatory reactions. The prevalence of atherogenic diseases such as coronary heart disease (CHD) are increasing in Korean adults of middle age and elderly. The increased cell damage from free radicals and inflammation have been implicated in etiology of CHD, and the evidence is accumulating that low zinc status is involved in the prevalence of this inflammatory atherogenic disease. However, little is known about the zinc status of Korean CHD and its relationship with dietary zinc intake and zinc bioavailabilty. In this study the serum zinc levels of male patients with CHD over 40 yrs. were compared with that of healthy adult males and its associations with dietary zinc intake and zinc bioavailabilty affecting factors were examined. Serum zinc level was measured by HANARO research reactor using neutron activation analysis (NAA) method. The overall proportion of patients with zinc deficiency, serum zinc concentrations below $74.0{\mu}g/dL$ was 32.8% compared to the 10.3% in healthy group. The average serum zinc levels were $80.7{\mu}g/dL\;and\;88.3{\mu}g/dL$ in patients and healthy group, respectively, showing significantly low zinc status in CHD patients compared to healthy group. The intake of nutrients such as energy, carbohydrate, iron, and copper of CHD patients was significantly higher compared to that of the healthy group. In addition, the intake of calcium, iron, and protein from vegetable foods was significantly higher in CHD patients than that of healthy group. The dietary zinc intake was $12.7{\pm}4.5mg$ and $11.5{\pm}6.9mg$ in CHD patients and control group, respectively, which showed no difference. The phytate intake of patients group, which is 1389.0 mg, was significantly higher than the control group which showed 1104.8 mg. However, the ratio of phytate: zinc or phytate * calcium. zinc per 1000 kcal energy intake did not show any difference between two groups. The serum zinc levels did not show any correlation with zinc or factors that affect the bioavailability of zinc. The dietary factors influencing the zinc status were not found in CHD patients.