• 제목/요약/키워드: Neutral zone

검색결과 108건 처리시간 0.023초

요통에서의 pressure biofeedback unit(stabilizer)를 사용한 안정화 운동 (The study of stability exercise using pressure biofeedback unit for low back pain)

  • 김국주;공관우;권순오;장용근;황희준;박준기
    • 대한물리치료과학회지
    • /
    • 제19권2호
    • /
    • pp.63-71
    • /
    • 2012
  • Purpose : This study aimed to acquire a basic knowledge about lumbar stability and inquire into exercise approach of pressure biofeedback unit for lumbar stability. Methods : This study was composed with reviewed theory of lumbar stability and several books and articles for exercise using pressure biofeedback unit. Results : The stability of lumbar should work symmetrical with passive, active, control subsystem in neutral zone, and local muscles should be using for stability. Especially, selective using of transverse abdominis work for lumbar stability importantly. The control of using pressure biofeedback unit may important not only examination but treatment. Conclusion : The stability of lumbar need co-contraction of specific local muscle and training for timing as well as using pressure biofeedback unit for accurate control may use for examination and therapedic approach.

  • PDF

FRP-UHPC 복합 보강기법으로 보강된 RC 슬라브의 휨 파괴를 위한 설계 조건 (Flexural Failure Design Criteria for Retrofitted RC Slabs using FRP-UHPC Hybrid System)

  • 김정중;노혁천;마흐무드 레다 타하
    • 복합신소재구조학회 논문집
    • /
    • 제3권2호
    • /
    • pp.11-18
    • /
    • 2012
  • This study proposes flexural failure design criteria of continuous slabs enhanced by a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC). The proposed hybrid retrofit system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. The neutral axis of the enhanced sections in positive moment zone at flexural failure is enforced to be in UHPC overlay for preventing the compression in FRP. From this condition, a relationship between design parameters of FRP and UHPC is established. Although the capacity of the proposed retrofit system to enhance flexural strength and ductility is confirmed through experiments of one-way RC slabs having two continuous spans, the retrofitted slabs failed in shear. To prevent this shear failure, a design criteria of flexural failure is proposed.

The Anatomy and Histoarchitecture of the Olfactory Organ in the Korean Flat-Headed Goby Luciogobius guttatus (Pisces; Gobiidae)

  • Kim, Hyun-Tae;Park, Jong-Young
    • Applied Microscopy
    • /
    • 제46권1호
    • /
    • pp.51-57
    • /
    • 2016
  • The histology and anatomy of the olfactory organ in Luciogobius guttatus was investigated using a light microscopy and scanning electron microscopy. The paired olfactory organs in the dorsal part of the snout are situated in between the upper lip and the eyes. They consist of two nostrils, one anterior and the other posterior openings, and a single olfactory cavity. The anterior nostril, an incurrent opening, forms a short tubular structure from the skin. The posterior nostril, an excurrent opening, forms a circular structure opened to the exterior. The distributional pattern of the sensory epithelium is a continuous type. The sensory epithelium with numerous-motile cilia is made up of receptor cells, supporting cells, basal cells, and mucous cells. In contrast, the non-sensory epithelium is comprised of stratified epithelial cells and two types of mucous cells, acidic and neutral cells. The cilia number of the receptor cell is in range of 3 to 4 units. Such results in L. guttatus may reflect its ecological habit and microhabitat in the tidal zone with a periodic tide.

의치의 안정성을 증대시키기 위한 고려 요소: 증례보고 (Considerations for increasing denture stability: a case report)

  • 김지연;김형섭;배아란
    • 대한치과보철학회지
    • /
    • 제50권4호
    • /
    • pp.311-317
    • /
    • 2012
  • 총의치 장착시, 환자는 생리적으로 안정된 범위 내에서 자연스럽게 기능하기를 원하며 이를 위해서는, 안모의 회복(심미적 효과), 생물학적으로 안정된 인공치 배열과 외형, 의치 동요가 없는 교합접촉이 반드시 필요하다. 이에 본 증례보고에서는 총의치를 제작하기에 불리한 조건을 가진 환자를 대상으로 인상면, 연마면, 교합면에 있어서의 의치의 안정을 증대시키기 위해, 기능적 변연 형성을 통한 인상채득, 중립대 확인, 생리적 중심위 재확립, 안정된 교합을 형성시켜 주었으며, 임상적으로 기능과 심미적인 측면에 있어서 만족할 만한 결과를 얻었기에 이를 보고하고자 한다.

강관 코아 합성 중공 기둥의 연성 거동 연구 (Ductility of Circular Hollow Columns with Internal Steel Tube)

  • 강영종;한승룡;박남회
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2002년도 춘계학술대회 논문집
    • /
    • pp.183-188
    • /
    • 2002
  • In locations where the cost or concrete is relatively high, or in situations where the weight or concrete members is to be kept to a minimum, it may be economical to use hollow reinforced concrete vertical members. Hollow reinforced concrete columns with low axial load, moderate longitudinal steel percentage, and a reasonably thick wall were found to perform in a ductile manner at the flexural strength, similar to solid columns. However, hollow reinforced concrete columns with high axial load, high longitudinal steel percentage, and a thin wall were found to behave in a brittle manner at the flexural strength, since the neutral axis is forced to occur away from the inside face of the tube towards the section centroid and, as a result, crushing of concrete occurs near the unconfined inside face of the section. If, however, a steel tube is placed near the inside face of a circular hollow column, the column can be expected not to fail in a brittle manner by disintegration of the concrete in the compression zone. Design recommendation and example by moment-curvature analysis program for curvature ductility are presented. Theoretical moment-curvature analysis for reinforced concrete columns, indicating the available flexural strength and ductility, can be conducted providing the stress-strain relation for the concrete and steel are known. In this paper, a unified stress-stain model for confined concrete by Mander is developed for members with circular sections.

  • PDF

덕음광산 광미의 산화${\cdot}$환원 조건에 따른 전이원소의 이동성 (Mobility of Transition Metals by Change of Redox Condition in Dump Tailings from the Dukum Mine, Korea)

  • 문용희;문희수;박영석;문지원;송윤구;이종천
    • 자원환경지질
    • /
    • 제36권4호
    • /
    • pp.285-293
    • /
    • 2003
  • 본 연구에서는 덕음광산 광미를 대상으로 심도별로 비포화대에서 광미와 증류수(5:1)의 반응에 의한 반응수와 포화대에서 공극수를 추출하여 화학분석, 열역학적 모델링 그리고, 고상시료에 대한 광물학적 연구를 통해 pH 및 산화${\cdot}$환원 변화에 따른 원소들의 거동특성과 이에 영향을 주는 고상의 용해도 특성을 규명하고자 하였다. 반응수 및 공극수에 대한 심도별 화학분석을 실시한 결과, 비포화대에서는 황화광물의 산화작용으로 낮은 p(2.71~6.91)조건이 형성되어 $SO_4^{2-}$(561~1430mg/L)와 금속이온(Zn:0.12~158mg/L, Pb:0.06~0.83mg/L, CD:0.06~1.35mg/L)의용존이온 함량이 높았다. 그리고 열역학적 모델링과 XRD분석을 통해 자로사이트(jarosite, $KFe_3(SO_4)_2(OH)_6)$와 석고(gypsum, $CaSO_4{\cdot}2H_2O$)가 동정되었다. 포화대에서는 중성의 pH 값(7.25~8.10)으로 인해 비포화대에 비해 금속이온 함량이 줄어들었으나, 심도가 증가함에 따라 pe 값의 감소(7.40$leftrightarro}$3.40)로 산화-환원에 민감한 Fe와 Mn의 용존이온 함량이 다소 증가하였다. 열역학적 모델링과 XRD(X-ray diffraction)분석으로 정성된 능망간석(rhodochrosite, $MnCO_3$)의 존재는 Mn산화물의 환원작용을 지시해 준다. 산화-환원 변위에 비해 pH가 금속화합물의 이온화 작용에 더 많은 영향을 미치지만, 포화대에서는 pe 값의 감소로 Fe와 Mn의 용존 이온의 증가와 An 사이의 상관관계로 대변된다. 따라서, Fe와 Mn수산화물의 재용해로 인해 동시에 침전된 중금속의 기동에 영향을 미치고 있음을 알 수 있다.

한반도 신생대 후기 현무암의 근원 맨틀 암상과 두 종류의 부화 맨틀 (Mantle Source Lithologies of Late Cenozoic Basaltic Rocks and Two Varieties of Enriched Mantle in the Korean Peninsula)

  • 최성희
    • 광물과 암석
    • /
    • 제35권3호
    • /
    • pp.183-197
    • /
    • 2022
  • 한반도의 판 내부 기원 신생대 후기 현무암류(백두산, 전곡, 백령도, 평택, 아산, 간성, 울릉도, 독도, 제주도 등)에 대해 그 동안에 보고된 Sr-Nd-Pb-Mg-Zn 동위원소를 포함한 지구화학 자료를 종합정리하고, 그 근원 맨틀 속에 포함된 암상을 파악한 후 필요한 맨틀 단성분의 종류와 그 성인에 대해서 고찰하였다. Sr-Nd 동위원소 상관도에서 제주도는 EM2형 해양도 현무암의 영역에 도시되는 반면 다른 지역 현무암류는 EM1형 해양도 현무암의 영역에 도시된다. Pb-Pb 동위원소 상관도에서 제주도는 인도양 중앙해령 현무암과 EM2 단성분 간의 혼합 배열을 보이는 반면, 다른 지역 현무암류는 인도양 중앙해령 현무암과 EM1 단성분 간의 혼합 배열을 보인다. 한반도 현무암류는 석류석 러어조라이트와 함께 과거에 섭입하여 맨틀 전이대에 정치하고 있는 해양판 물질(에클로자이트/휘석암, 원양 퇴적물, 탄산염)이 혼합된 맨틀에서 유래되었다. EM1형 단성분의 역할을 하는 물질은 오래전(~2.0 Ga)에 섭입되어 중성 부력으로 맨틀 전이대에 정치되어 있는 (함)K-Hollandite 원양 퇴적물로 추정된다. EM2 단성분은 맨틀 속에 섭입된 후 빠른 시간 안에 재활성된 상대적으로 젊은(아마도 태평양판의) 원양 점토 퇴적물일 가능성이 높다. 에클로자이트와 탄산염은 EM 구성요소는 아니나 한반도 현무암의 근원 맨틀 속에 공통 인자로 포함되어 있다.

블로킹에 의한 2014년 2월 동해안 지방 폭설 분석 (Analysis of the February 2014 East Coast Heavy SnowFall Case Due to Blocking)

  • 배정호;민기홍
    • 대기
    • /
    • 제26권2호
    • /
    • pp.227-241
    • /
    • 2016
  • This study investigated the cause of the heavy snowfall that occurred in the East Coast of Korea from 6 February to 14 February 2014. The synoptic conditions were analyzed using blocking index, equivalent potential temperature, potential vorticity, maritime temperature difference, temperature advection, and ground convergence. During the case period, a large blocking pattern developed over the Western Pacific causing the flow to be stagnant, and there was a North-South oriented High-to-Low pressure system over the Korean Peninsula because of this arrangement. The case period was divided into three parts based on the synoptic forcing that was responsible for the heavy snowfall; detailed analyses were conducted for the first and last period. In the first period, a heavy snowfall occurred over the entire Korean Peninsula due to strong updrafts from baroclinic instability and a low pressure caused by potential vorticity located at the mid-troposphere. In the lower atmosphere, a North-South oriented High-to-Low pressure system over the Eastern Korea intensified the easterly airflow and created a convergence zone near the ground which strengthened the upslope effect of the Taebaek Mountain range with a cumulative fresh snowfall amount of 41 cm in the East Coast region. In the last period, the cold air nestled in the Maritime Province of Siberia and Manchuria strengthened much more than that in the first half and extended to the East Sea. The temperature difference between the 850 hPa air and the SST was large and convective clouds developed over the sea. The highest cumulative fresh snow amount of 39.7 cm was recorded in the coastal area during this period. During the entire period, vertically oriented equivalent potential temperature showed neutral stability layer that helped the cloud formation and development in the East Coast. The 2014 heavy snowfall case over the East Coast provinces of Korea were due to: 1) stagnation of the system by blocking pattern, 2) the dynamic effect of mid-level potential vorticity of 1.6 PVU, 3) the easterly air flow from North-South oriented High-to-Low pressure system, 4) the existence of vertically oriented neutral stable layer, and 5) the expansion of strong cold air into the East Sea which created a large temperature difference between the air and the ocean.

스테인리스강의 국부부식 저항성 연구에 미세방울셀의 응용 (Applications of Micro-Droplet Cell to Study of Localized Corrosion Resistance of Stainless Steels)

  • 김성유;김희산
    • 전기화학회지
    • /
    • 제9권2호
    • /
    • pp.70-76
    • /
    • 2006
  • 마이크로 전기화학 실험법인 비접촉식 미세방울셀이 산 용액에 노출된 저 크롬이 함유된 스테인리스강(STS 316)과 같이 젖음성이 높은 전기화학계에 사용되는데 어려움이 있었다. 음압의 인가, 방울의 크기 제어 그리고 소수성의 개스킷의 사용은 높은 젖음성을 지닌 표면에서 비접촉식 미세방울셀의 적용을 가능하게 하였다. 개선된 미세방울셀의 신뢰성을 확인하고자 3종류의 다른 계-산성염화용액과 고 크롬 페라이트 스테인리스강, 산성염화용액과 STS 316 그리고 중성염화용액과 STS 316-에 대하여 개선된 미세방울셀로 국부부식 연구를 수행하였다. 첫째 산성용액에서 고 크롬강의 양극 분극 결과는 $\alpha/\sigma$ 계면 근처에서 국부부식이 크롬 고갈층에 의한 것임을 보여주었다. 둘째 산성용액에서 STS316의 양극 분극실험이 개선된 미세방울셀에서 성공적으로 수행됨을 확인할 수 있었다. 특히, 미세방울셀에서 얻어진 국부 양극 분극곡선을 통해 STS316의 내식성에 미치는 $\delta$-라이트 영향을 밝힐 수 있었다. 마지막으로 중성염화 용액에서 STS316의 양극 분극곡선은 핏팅 저항성이 $\delta$-페라이트보다 개재물에 의존됨을 보여주었다.

A Study on the Influence of Digital Experience and Purchase in the 4th Industrial Revolution : Focusing on Differences between Satisfied, Neutral, and Dissatisfied Groups

  • Jung, Sang Hee;Lee, Sang-Jik
    • Journal of Information Technology Applications and Management
    • /
    • 제26권4호
    • /
    • pp.51-69
    • /
    • 2019
  • One of the most considerate phenomena of the era of the Fourth Industrial Revolution is the use of digital devices. Digitalization is rapidly advancing through all areas of industry and life. Customer journey with digitalization is looking totally different from previous customer journey. The research targets were users of fashion, automobiles, cosmetics and online shopping malls. We analyzed 300 people for each valid questionnaire. The results of the study are as follows. First, it has been proven that digital experience affects positive (+) impact on purchasing intention and positive (+) impact on recommending intention and negative impact (-) on switching intent and subsequently affects positive impact (+) to purchase and incase of switching intent, negative impact (-) to purchase. Unlike traditional methods such as SPC(Service Profit Chain), the Digital experience to Purchase process Chain (DPC) has been identified to be suitable in the digital age. Second, the digital satisfied group (5 score-very satisfaction) has shown same result as above. However the digital neutral group (even though 4 score- satisfaction in five-point scale), specially in a highly competitive industry, has different from the satisfied group and 3 score-normal is same as dissatisfied group. It means that this group is that If there is a high level of attractiveness of substitute goods, there is a high possibility of switching them. It has supported Jones and Sasser [1995] that there have been two types of loyalty of true long-term loyalty and what we call false loyalty in the highly competitive industry zone which is commoditization or low differentiation, many substitutes, low cost of switching. Identifying true loyalty and false loyalty is crucial to establishing a customer experience strategy. it is necessary to actively utilize long-term digital experiences strategy to increase the total satisfaction of digital experience through all of customer purchasing journey in order to enhance the digital customer experience. It is difficult to see the effect as a one-time event. It should be scaled over the entire customer purchase process over a long period of time, which can positively affect purchase intention, recommendation intention, and conversion intention. This is also why it is difficult for second-runners to overtake first-runners in a short period.