• 한국운동역학회지
• /
• 제24권2호
• /
• pp.121-129
• /
• 2014

The purpose of this study was to investigate the effect of the toe headings on the biomechanics of knee joint in drop landing in an attempt to find the potential risk of non-contact anterior cruciate ligament (ACL) injury. Seventeen male college students ($20.5{\pm}1.1$ yrs; $175.2{\pm}6.4$ cm; $68.8{\pm}5.8$ kg), having no neuromuscular injury within an year, participated in this study. Three different toe headings such as toe-in (TI), neutral (N), and toe-out (TO) positions were tested. Motion capturing system consisting of eight high speed cameras and two force platforms were used to collect three-dimensional motion data and ground reaction force data during landing. Results indicated joint angles and peak joint moments were significantly affected by the toe headings. TI position produced larger valgus angle due to reduce knee distance in addition to higher flexion and valgus moment than other positions, which was somewhat vulnerable to the potential risk of non-contact ACL injury. TO position caused the largest internal rotation angle with smaller joint moments. Therefore, it is recommended that athletes need to land on the ground with neutral toe-heading position as possible in order to minimize the potential risk of non-contact ACL injury.

• Safety and Health at Work
• /
• 제9권1호
• /
• pp.59-62
• /
• 2018

Background: Several grip strength tests are commonly used for detecting sincerity of effort. However, there is still no widely accepted standardized sincerity of effort test. Therefore, this study aimed to examine whether grip strength test in three wrist positions could distinguish between maximal and submaximal efforts. Methods: Twenty healthy individuals (10 men and 10 women) with a mean age of $26.7{\pm}3.92years$ participated in this study. All participants completed two test conditions (maximal and submaximal efforts) in three wrist positions (neutral, flexion, and extension) using both hands. Each participant exerted 100% effort in the maximal effort condition and 50% effort in the submaximal effort condition. The participants performed three repetitions of the grip strength test for each session. Results: The results showed that there is a significant main effect of the type of effort (p < 0.001), wrist position (p < 0.001), and hand (p = 0.028). There were also significant types of effort and wrist position interactions (p < 0.001) and effort and hand interactions (p < 0.028). The results also showed that grip strength was highest at the wrist in neutral position in both the maximal and the submaximal effort condition. Grip strength values of the three wrist positions in the maximal effort condition were noticeably greater than those in the submaximal effort condition. Conclusion: The findings of this study suggest that grip strength test in three wrist positions can differentiate a maximal effort from a submaximal effort. Thus, this test could potentially be used to detect sincerity of effort in clinical setting.

• Journal of Oral Medicine and Pain
• /
• 제23권1호
• /
• pp.45-55
• /
• 1998

The author assessed the sagittal relationships between glenoid fossa of the temporal bone and mandibular condyle from lateral transcranial views of 74 TMJ with disc displacement and 16 TMJ with normal disc-condyle complex by the magnetic resonance image findings. All the subjects were female and also in their 3rd decades. The disc displacement group was subdivided into anterior disc displacement with reduction (ADWR) group and anterior disc displacement without reduction (ADWOR) group. The anterior, superior, and posterior joint spaces as well as anterior/posterior (A/P) ratio of the space at the closed jaw position and vertical and horizontal components of the condyle position relative to the articular eminence at the open jaw position were measured from all the subjects and the data were compared among groups. The result were as follows : 1. The mean posterior joint space of ADWR group was smaller than ADWOR group, but there were no significant differences in anterior and superior joint spaces between two groups. 2. There showed a tendency of higher A/P ratio in ADWR group which meant the condyle of ADWR was likely to take posteriorly displaced position. 3. There were higher proportion of neutral condylar position in glenoid fossa in normal group, but higher proportion of posterior condylar position in ADWR group. 4. There were no significant differences in the degree of condyle-fossa concentricity among groups.

• The Journal of Korean Physical Therapy
• /
• 제27권5호
• /
• pp.345-350
• /
• 2015

Purpose: This study was conducted to determine the effects of ankle joint position during closed kinetic chain (CKC) exercise on knee extensor strength and balance in patients with chronic stroke. Methods: Sixteen patients with chronic stroke participated in the study. Participants were randomly assigned to two groups: $15^{\circ}$ ankle joint plantar flexion group (n=8) and ankle joint neutral group (n=8) during CKC exercise. All participants underwent conventional physical therapy for 30 minutes. In addition, the experimental group ($15^{\circ}$ ankle joint plantar flexion group) and control group (ankle joint neutral group) participated in a 20-minute CKC exercise program. In both groups exercise was performed three times a week for four weeks. Outcomes including knee extensor strength and balance ability (Five times sit-to-stand test, Timed up and go test, and Balancia) were measured before and after exercise. Results: Significant differences in knee extensor strength and balance ability were observed between pre- and post-exercise in all groups (p<0.05). The improvement of knee extensor strength and dynamic balance was significantly higher in the experimental group than in the control group (p<0.05). Conclusion: These findings demonstrated that $15^{\circ}$ ankle joint plantar flexion during closed kinetic chain exercise is effective in improvement of knee extensor strength and dynamic balance in patients with chronic stroke.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.1-7
• /
• 2014

Brushless Direct Current(BLDC) Motor is essential to measure a rotor position because of that this motor type needs to synchronize the rotor's position and changeover phase current instead of a brush and commutator used on the existing dc motor. Recently, many researches have studied on sensorless control drive for BLDC motor. The conventional control methods are a compensation value dq, Kalman filter, Fuzzy logic, Neurons neural network, and the like. These methods has difficulties of detecting BEMF accurately at low speed because of low BEMF voltage and switching noise. And also, the operation is long and complex. So, it is required a high-performance microprocessor. Therefore, it is not suitable for a small BLDC motor sensorless drive. This paper presents control methods suitable for economic small BLDC motor sensorless drive which are an improved design of the BEMF detection circuit, simplifying a complex algorithm and computation time reduction. The improved motor sensorless drive is verified stability and validity through being designed, manufactured and analyzed.

• 재활복지공학회논문지
• /
• 제9권4호
• /
• pp.285-291
• /
• 2015

본 논문에서는 IMU(inertial measurement unit)의 데이터를 이용하여 사람의 앉은 자세를 분류하는 알고리즘을 제안한다. 제안하는 알고리즘은 IMU의 데이터를 주성분 분석법(principle component analysis: PCA)을 이용하여 특징 벡터를 3개로 축소시켰고, RBF(radial basis function) 커널을 적용한 서포트 벡터 머신(support vector machine: SVM)을 이용하여 자세를 분류하였다. 데이터의 측정을 위하여 건강한 성인 3명을 대상으로 실험을 실시하였고, 데이터의 수집을 위하여 넥밴드 형태의 이어폰에 IMU를 내장한 장치를 개발하여 착용하였다. 피험자는 각각 neutral position, smartphoning, writing의 세 가지 앉은 자세에 대하여 실험을 진행하였다. 실험 결과 제안하는 PCA-SVM 알고리즘은 특징 벡터의 차원을 25%로 축소시키면서도 95%의 신뢰를 보였다.

• 한국전문물리치료학회지
• /
• 제17권2호
• /
• pp.10-16
• /
• 2010

This study was undertaken to develop the scapulometer, a measuring tool for scapular winging, and to determine the reliability of scapulometer. Thirty subjects with scapular winging greater than 2 cm participated in this study. Two examiners measured scapular winging using the scapulometer. Standardized measurement position of each subject was as follows: neutral position of shoulder and wrist, $90^{\circ}$ flexion of elbow, and cuff weight of 5% and 10% of body weight (BW) to neutral wrist. The interrater and intrarater reliability were calculated with an intraclass correlation coefficient (ICC) with 95% confidence interval (CI) and standard error of measurement (SEM) at 5% BW and 10% BW. The level of scapular winging was tested between 5% BW and 10% BW with a paired t-test. The interrater reliability was shown to be high at 5% BW (ICC(2,k)=.955, 95% CI=.900~.979, SEM=.07) and at 10% BW (ICC(2,k)=.968, 95% CI=.930~.985, SEM=.06). The intrarater reliability was shown to be high at 5% BW (ICC(2,k)=.921, 95% CI=.842~.961, SEM=.09) and at 10% BW (ICC(2,k)=.906, 95% CI=.813~.954, SEM=.10). The level of scapular winging was significantly different between 5% BW and 10% BW. Conclusively, it is demonstrated that the scapulometer is an objective and qualitative measurement tool for scapular winging.

• 대한물리의학회지
• /
• 제8권2호
• /
• pp.193-200
• /
• 2013

PURPOSE: The purpose of this study was to find out variations in body posture by using the baby carrier at the front side and back side. METHODS: Thirty two healthy and young female who will bring up infants and had no musculoskeletal disorders of neck, lumbar and low limb were recruited for this study. They were each marked about ears of tragus, cervical 7th, acromion anterior end, anterior superior iliac spine, posterior superior iliac spine, greater trochanter and lateral malleolus as landmarks to measure variations of body posture when they carry infants at the front side and back side. Landmarks were regarded as the creteria in order to measure NeckFlexion angle(NF), Foreward shoulder angle(FSA), Pelvic tilt(PT), Sway angle(SA), Head displacement(HD) and Scapular displacement(SD). Variations in body posture were measured from the neutral position to the front and back side by using Image J. RESULTS: There were significance level (p<.05) in NF, PT, SA, HD and SD except for FSA in two different side. CONCLUSION: The results of this study indicate that each of the using ways of baby carrier for baby care was influenced postural responses of young women. therefore, it could be considered to apply to women who have abnormal body posture in order to minimize musculoskeletal disorders.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.793-809
• /
• 2015

In this scientific work, constructing of a novel shear deformation beam model including the stretching effect is of concern for flexural and free vibration responses of functionally graded beams. The particularity of this model is that, in addition to considering the transverse shear deformation and the stretching effect, the zero transverse shear stress condition on the beam surface is assured without introducing the shear correction parameter. By employing the Hamilton's principle together with the concept of the neutral axe's position for such beams, the equations of motion are obtained. Some examples are performed to demonstrate the effects of changing gradients, thickness stretching, and thickness to length ratios on the bending and vibration of functionally graded beams.

• 대한물리의학회지
• /
• 제18권4호
• /
• pp.77-87
• /
• 2023

PURPOSE: The purpose of this study was to investigate the changes in the flexibility and elasticity of the muscles when the hamstrings were stretched in one direction and when they were stretched in three directions. METHODS: In this study the subjects were divided into two groups, namely the 'one-direction stretching exercise of the hamstring muscle in the neutral position' group (female: 14 people, male: 14 people) and the 'three-way stretching exercise' group (female: 12 people, male: 14 people) considering the positions of the three hamstring muscles. The elasticity and flexibility of the hamstring muscles were measured before and after the self-extension exercise, and the average value of two measurements was noted. To evaluate the flexibility of the hamstring muscle, a 'sit and reach' test was performed, and muscle elasticity was measured using the MyotonPRO® device. RESULTS: After the stretching exercise, flexibility increased in both groups. In terms of muscle elasticity, the body dynamic strength and resonance frequency of the stretching one-direction stretching group decreased after the stretching exercise. CONCLUSION: To alter the muscle characteristics and increase the flexibility when performing a stretching exercise, selecting and stretching only one muscle with the lowest range of motion yields effective results. The ideal technique to be employed appears to be to stretch the entire hamstring muscle in one direction from the neutral position.