• Journal of the Korean Applied Science and Technology
• /
• v.7 no.1
• /
• pp.93-105
• /
• 1990

Semicarbazone formation of nine monosubstituted benzaldehydes was studied kinetically in 20% methanol buffer solution at 15, 25, 35, and $45^{circ}C$. The rate of p-nitrobenzaldehyde semicarbazone formation is 2.7 times as fast as that of benzaldehyde, while p-hvdroxybenzaldehyde is 3.6 times as slow as that of benzaldehyde. Activation energies for p-chlorobenzaldehyde, benzaldehyde, p-methylbenzaldehyde, p-methoxybenzaldshyde, p-hydroxybenzaldehyde, and p-dimethylaminobenzaldehyde semicarbazone formation are calculated as 5.80, 6.19, 6.57, 7.06, 8.03, and 6.46 kcal/mol respectively. It is concluded from the effect of ionic strength that the reaction is affected by not ions but neutral molecules involving hydrogen bonding between oxygen atom of carbonyl group and hydrogen atom of acid-catalyst, and concerted attack of the necleophilic reagent, free base on carbonyl compound. Also, the effect of solvent composition is small in 20% and 50% methanol (and ethanol) aqueous solutions. The ${\rho}-{\sigma}$ plots for the rates of semicarbazone formation at pH 7.1 show a linear ${\rho}-{\sigma}$ relationship (${\rho}=0.14l$, in contrast to that at pH 2.75 and pH 5.4 corresponding to ${\rho}-{\sigma}$ correlations reparted by Jencks. The rate of semicarbazone formation at pH 5.4 show a relationship which is convex upward, resulting in a break in the curve but at pH 2.75, slight difference from a linear relationship. As a result of studying citric acid catalysis, second-order rate constants increase linearly with citric acid concentration and show a 2 times increase as the catalyst concentration is varied from 0.025 to 0.1 mol/1 at pH 2,9, but slight increase at pH 5.3. The rate-determining step is addition below pH 5 but is dehydration between pH 5 and 7. Conclusively, the rate-determining step of the reaction changes from dehydration to addition in respect to hydrogen ion activity near pH 5. The ortho: para rate ratio of the hydroxybenzaldehydes for semicarbazone formation is about 17 at $15^{\circ}C$. It is concluded that the results constitute strong evidence in favor of greater stabilization of p- than o-hydroxybenzaldehyde by substituent which donate electrons by resonance and is due to hydrogen bonding between the carbon-bound hydrogen of the-CHO group and the oxygen atom of the substituent.

• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.399-404
• /
• 1998

Genipin was obtained from hydrolysis of geniposide isolated from gardenia fruits with ${\beta}-glucosidase$. Reaction of genipin with glycine, alanine, histidine, lysine, phenylalanine and glutamate in aqueous buffer solution converted colorless starting materials to blue pigments. Effect of pH for the formation of blue pigments was tested using UV/Vis spectrophotometer. The optimum pH for the formation of blue pigments was 7.0. No pigment and trace amounts were formed at acidic (pH 3.0) and alkaline (pH 12.0) conditions, respectively. The amount and tincture of blue color were distinct with different amino acids. In contrast with lysine $({\lambda}_{max}=573\;nm)$, glycine $({\lambda}_{max}=595\;nm)$, phenylalanine $({\lambda}_{max}=602\;nm)$ and alanine $({\lambda}_{max}=595\;nm)$, the reaction of genipin with histidine $({\lambda}_{max}=601\;nm)$ and glutamate $({\lambda}_{max}=601\;nm)$ produced relatively small amounts of blue pigments. Rate constants for the formation of blue pigments from genipin with amino acids at various temperatures $(60,\;70,\;80,\;90^{\circ}C,\;pH\;7.0\;phosphate\;buffer)$ were obtained. Rate constants of genipin with basic amino acids were larger than neutral or acidic amino acids. Arrhenius activation energies of the formation of blue pigments indicated that activation energy of glycine $(E_A=9.8\;kcal/mol)$ was especially lower than those of other amino acids $(E_A=13.3{\sim}15.4\;kcal/mol)$.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.403-411
• /
• 1984

Amberlite XAD-7 and XAD-4 resins impregnated with DXHQ (5,7-dihalo-8-hydroxyquinoline) were prepared for the adsorption, separation and recovery of heavy metal ions from aqueous solutions. The characteristics of the impregnated resins, DXHQ (X : Cl, Br, I)-XAD were studied to find out the proper pairs of resin and DXHQ for the adsorption of metal ions. The increasing order of the impregnated amount of DXHQ onto XAD-7 resin was as follows: DCHQ < DBHQ < DIHQ. It was observed from the plot of log $K_d$ vs. pH that the optimum pH range for the adsorption of DIHQ onto XAD-4 resin was from 3.0 to 7.0. The stabilities of the DXHQ-XAD resins were investigated by measuring the amount of DXHQ remained on the XAD resin after shaking the DXHQ-XAD resins in various solutions of pH ranging from 2 to 12 and hydrochloric acid solutions. The impregnated resins were considerably stable in both acidic and neutral solutions. The amount of DIHQ leached from DIHQ-XAD-4 resin by eluting with various HCl solutions (1 ∼ 5M) was negligible, but in the case of XAD-7 resin it increases as the concentration of HCl solution increases. The optimum pH ranges, absorption mole ratio (M : DXHQ) and adsorption capacities (mmol metal per gram of resin) for the adsorption of metal ions onto the DXHQ-XAD resins were determined respectively. The stability of metal ion absorbed by the DXHQ-XAD resins was observed as the following order: M-DCHQ-XAD-7 < M-DBHQ-XAD-7 < M-DIHQ-XAD-7. The adsorbed metal ions were quantitatively recovered by eluting with HCl (0.5 ∼ 5M) and DXHQ-XAD resins could be reused over 5 times without re-impregnation of DXHQ.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2005

The electrocatalytic reduction of O₂ was investigated with methyl viologen and methylene blue incorporated clay-modified electrodes. Clay suspensions were prepared with Na-montmorillonite, Ca-montmorillonite, and kaolinite. The methyl viologen-clay modified electrodes were made by coating clay suspensions adsorbing methyl viologen on a glassy carbon electrode. Cyclic voltammetry were performed in aqueous media to investigate the electrocatalytic property of the modified electrode in reducing O₂. A Na-montmorillonite modified electrode showed the greatest adsorption capacity for methyl viologen. The modified electrode made of Na-montmorillonite suspension of 0.87 g/10 mL and a 2.5 mM of methyl viologen solution showed the most effective electrocatalytic property, where the catalytic reduction potential was shifted by 242.6 mV toward the positive potential. The electrocatalytic ability was more significant in acidic (pH=3.7) and alkaline (pH=12.7) media than the neutral pH range (6.3∼8.3). The methyl viologen-Na-montmorillonite modified electrode had the good reproducibility and maintain the electrocatalytic property over 20 times reuse.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.46-52
• /
• 1998

The hydrolysis rate of insecticidal buprofezin(IUPAC : tert-butylimino-3-isopropyl-5-phenylperhydro-1,3,5-thiadiazin-4-one) in the range of pH 2.0 and 12.0 have been examined in 15%(v/v) aqueous dioxane at $45^{\circ}C$. The hydrolysis mechanism of buprofezin is proposed from the pH-effect, solvent effect(${\ell}{\gg}m$), thermodynamic parameter(${\Delta}H^{\neq}$=11.12 $Kcal{\cdot}mol^{-1}$ &, ${\Delta}S^{\neq}=5.0e.u.$), rate equation and hydrolysis product, l-isopropyl-3-phenyl urea. General acid catalyzed hydrolysis and specific acid catalyzed($k_{H3O+}$) hydrolysis through $A-S_{E}2$ and A-2(or $A_{AC}2$) reaction mechanism with orbital-control reaction proceed below pH 8.0 and above pH 9.0, the nucleophilic addition-elimination, $Ad_{N}-E$ mechanism via tetrahedral($sp^{3}$) intermediate is initiation by general base catalyzed($k_{H2O}$) reaction. Buprofezin was more stable in alkaline ($k=10^{-8}sec.^{-1}$) than acid solutions from the sigmoid pH-rate profile. And the half-life($t=\frac{1}{2}$) of hydrolysis reaction in neutral aqueous solution(pH 7.0) at $45^{\circ}C$ was about 3 months.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.667-675
• /
• 2020

An Alum-sludge based adsorbent (ASBA) was synthesized by the hydrothermal treatment of alum sludge obtained from settling basin in water treatment plant. ASBA was applied to remove fluoride and arsenic in artificially-contaminated aqueous solutions and mine drainage. The mineralogical crystal structure, composition, and specific surface area of ASBA were identified. The result revealed that ASBA has irregular pores and a specific surface area of 87.25 ㎡ g-1 on its surface, which is advantageous for quick and facile adsorption. The main mineral components of the adsorbent were found to be quartz(SiO2), montmorillonite((Al,Mg)2Si4O10(OH)2·4H2O) and albite(NaAlSi3O8). The effects of pH, reaction time, initial concentration, and temperature on removal of fluoride and arsenic were examined. The results of the experiments showed that, the adsorbed amount of fluoride and arsenic gradually decreased with increasing pH. Based on the results of kinetic and isotherm experiments, the maximum adsorption capacity of fluoride and arsenic were 7.6 and 5.6 mg g-1, respectively. Developed models of fluoride and arsenic were suitable for the Langmuir and Freundlich models. Moreover, As for fluoride and arsenic, the increase rate of adsorption concentration decreased after 8 and 12 hr, respectively, after the start of the reaction. Also, the thermodynamic data showed that the amount of fluoride and arsenic adsorbed onto ASBA increased with increasing temperature from 25℃ to 35℃, indicating that the adsorption was endothermic and non-spontaneous reaction. As a result of regeneration experiments, ASBA can be regenerated by 1N of NaOH. In the actual mine drainage experiment, it was found that it has relatively high removal rates of 77% and 69%. The experimental results show ASBA is effective as an adsorbent for removal fluoride and arsenic from mine drainage, which has a small flow rate and acid/neutral pH environment.