• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.80-86
• /
• 2016

This paper proposes the algorithm for forward link adaptive coding and modulation (ACM) and the detailed design for a satellite communication system to improve network reliability and system throughput. In the ACM scheme, the coding and modulation schemes are changed by as much as the channel can provide depending on the quality of the communication link. To implement the forward link ACM system in the Ka-band, channel prediction and modulation/coding decision methods are proposed and simulated. The parameters of the adaptive filter predictor based on the least mean square are optimized, the minimum mean square error of the channel predictor is 0.0608 when step size and the number of filter tap are 0.0001 and 4, respectively. A test-bed is set up to verify the forward link ACM system, and a test is performed using a Ka-band satellite (i.e., Communication, Ocean, and Meteorological Satellite [COMS]). This test verifies that the ACM scheme can increase the system throughput.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.489-491
• /
• 2002

The need for video diagnosis in medicine has been increased and real-time transfer of digital video will be an important component in PACS and telemedicine. But, Network environment has certain limitations that the required throughput can not satisfy quality of service (QoS). MPEG-4 ratified as a moving video standard by the ISO/IEC provides very efficient video coding covering the various ranges of low bit-rate in network environment. We implemented MPEG-4 CODEC (coder/decoder) and applied various compression ratios to moving ultrasound images. These images were displayed in random order on a client monitor passed through network. Radiologists determined subjective opinion scores for evaluating clinically acceptable image quality and then these were statistically processed in the t-Test method. Moreover the MPEG-4 decoded images were quantitatively analyzed by computing peak signal-to-noise ratio (PSNR) to objectively evaluate image quality. The bit-rate to maintain clinically acceptable image quality was up to 0.8Mbps. We successfully implemented the adaptive throughput or bit-rate relative to the image quality of ultrasound sequences used MPEG-4 that can be applied for diagnostic performance in real-time.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.63-70
• /
• 2009

The purpose of this paper is to propose a CSMA/CA protocol to reduce the delay time and increase the throughput of the original CSMA/CA protocol. In underwater environments, the efficiency of the protocol is reduced due to the increase of the propagation delay time, which results in increase of the collision possibility causing lowering of the transmission efficiency Considering this propagation delay, this paper propose to insert the STANDBY frame in a CTS packet in order to avoid the TimeOut status of the CSMA/CA protocol. According to the simulated test results, proposed protocol is increased about 20% throughput than original CSMA/CA protocol. And the more value of propagation per transmission delay 'a' is low, the more throughput of protocol is better.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.170-174
• /
• 2009

This paper describes the wireless communication test environment for the Link-K system and shows the performance analysis of multiple access protocols. The test environment consists of data generator, modem, radio sets, attenuators, and antennas. In case of both CSMA and Roll-Call protocols, throughput performance and delay are measured. And test results are analyzed. The test results would be used for communication performance analysis and network design of Link-K system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1708-1734
• /
• 2022

In the development of logistics system, the breakthrough of important technologies such as technology platform for logistics information management and control is the key content of the study. Based on Javascript and JQuery, the logistics system realizes real-time monitoring, collection of historical status data, statistical analysis and display, intelligent recommendation and other functions. In order to strengthen the cooperation of warehouse storage, enhance the utilization rate of resources, and achieve the purpose of real-time and visual supervision of transportation equipment and cargo tracking, this paper studies the VNF dynamic deployment and SFC routing problem in the network load change scenario based on the logistics system. The BIP model is used to model the VNF dynamic deployment and routing problem. The optimization objective is to minimize the total cost overhead generated by each SFCR. Furthermore, the application of the SFC mapping algorithm in the routing topology solving problem is proposed. Based on the concept of relative cost and the idea of topology transformation, the SFC-map algorithm can efficiently complete the dynamic deployment of VNF and the routing calculation of SFC by using multi-layer graph. In the simulation platform based on the logistics system, the proposed algorithm is compared with VNF-DRA algorithm and Provision Traffic algorithm in the network receiving rate, throughput, path end-to-end delay, deployment number, running time and utilization rate. According to the test results, it is verified that the test results of the optimization algorithm in this paper are obviously improved compared with the comparison method, and it has higher practical application and promotion value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.915-916
• /
• 2014

With the upcoming era of internet of things, the study of sensor network has been paid attention. Raspberry pi is a tiny versatile computer system which is able to act as a sensor node in hadoop cluster network. In this paper, we deployed 5 Raspberry pi's to construct an experimental testbed of hadoop sensor network with 5-node map-reduce hadoop software framework. We compared and analyzed the network architecture in terms of efficiency, resource management, and throughput using various parameters. We used a learning machine with support vector machine as test workload. In our experiments, Raspberry pi fulfilled the role of distributed computing sensor node in the sensor network.

• Journal of Korea Multimedia Society
• /
• v.8 no.5
• /
• pp.660-669
• /
• 2005

In this paper 10Mbps master-slave based PLC modems are tested for measuring and analyzing both network and application level performances in the general buildings. The devices under test consist of one master PLC modem and three slave modems. The selected parameters for inspecting the performances are throughput, latency and frame loss rate from the RFC 2544, and one-to-many and many-to-one throughput from the RFC 2285. The results of the performance test show that the PLC modems have Performed better in data transmission when the frame size is increased and the transmission speed is decreased. It is expected that these results will be useful to analyze the effect of noise sources when compared to the performance test under the noiseless environments.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.64-72
• /
• 2004

Mobility changes the computing environment of computer users rapidly with the broad use of the Internet. In order to support mobility in the Internet infrastructure, IETF standardized Mobile IP With the use of Mobile IP, the Internet users can use the Internet freely without any change in the IP address configuration when they move from their home networks to foreign networks. In this paper, we implement a test bed for evaluation the performance of Mobile IP to use it in the campus network. By evaluating the effect of the use of Mobile IP on the network performance, we expect that the possible side effect of its direct use in the campus network will be reduced.

• Management Science and Financial Engineering
• /
• v.16 no.1
• /
• pp.59-79
• /
• 2010

This paper considers bandwidth allocation and scheduling problems on Ethernet Passive Optical Networks (EPON). EPON is one of the good candidates for the optical access network. This paper formulates the bandwidth allocation problem as a nonlinear mathematical one and characterizes the optimal bandwidth allocation which maximizes weighted sum of throughput and fairness. Based upon the characterization, two heuristic algorithms are suggested with various numerical tests. The test results show that our algorithms can be used for efficient bandwidth allocation on the EPON. This paper also shows that the WSPT (Weighted Shortest Processing Time) rule is optimal for minimization the total delay time in transmitting the traffic of the given allocated bandwidth.

• Journal of Digital Contents Society
• /
• v.3 no.1
• /
• pp.101-111
• /
• 2002

Lately development of network around Internet expands range of data traffic to multimedia information, and so for the guarantee of multimedia services end-to-end QoS(Quality of Service) must service because comparing with existing Internet service can not support For satisfying those QoS requirements, network have to guarantee not only network on parameter, such as delay, jitter, throughput but also system resources like CPU utilization, memory usage. Therefore it is urgent to develop QoS based middleware to distribute multimedia data and maximize network utilization in the limited resource environment. And it must be necessary of network to provide end-to-end QoS(Quality of Service) for multimedia applications. Multimedia applications want that QoS which satisfy their own service properties be guaranteed Then, We must analyze those necessary QoS requirements md define QoS parameter which specify as two viewpoint, user's and network's perspective. Therefore network provider supplying network for usual user and university, enterprise must want to find about their own network performance and problem. It is essential for network manager to want to use a tool like this. On the basis of technique about QoS test-bed in the AIM network, We studied on the method of QoS measurement and management about end-to-end connection in the Internet. We measured network status about end-to-end connection and analyze the result of performance.